4.7/5
Super strong adhesive tape on the back, just peel the backing to stick
Tactical Skull for Gun Magazine, Car, Truck, Motorcycle, etc. Also great decoration choice for cellphone, iPad, tablet, headset, PC case, keyboard, etc.
- Size: 1" x 1.38". Weight 0.32 oz
- Comes with 2 sets decals in one package
- Quality made from weather resistant metal that does not rust or corrode and and are 3 dimensional
$234
The two "Punisher" skulls are constructed from heavy-duty, solid metal. Given the low cost of the item, the craftsmanship and quality are far beyond what I had anticipated. I can't vouch for how long the black paint will last, but the atmosphere I subject it to may be considered terrible by some and downright powder puffy by others, depending on their standards. Anyhow, the paint would be simple to fix. Another feature is that it is constructed of thick steel. It doesn't feel like a piece of tin that you pulled out of a kiddie vending machine. It has peel-and-place ready 3M contact adhesive. I have nothing but good things to say about this product. Even better, it arrived on schedule. I wish every purchase in life could be thus satisfying.I'm going to buy a few more for friends, acquaintances, and other non-irritating folks.
4.6/5
Low-profile, robust, and elegant mounting solution for the most common bipods on the market
Allows for the attachment of most Harris-style stud mounted bipods to m-lok compatible hand Guards and forends
Utilizes the direct-connect properties of the m-lok System; bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability
Machined from milspec-anodized aluminum; features beveled ends and corners to reduce snagging and sharp edges; All mounting hardware included
Also compatible with other accessories that attach to traditional Sling studs
$234
I've seen several reviews on this site describing how difficult and troublesome it was to install this and how the head became completely screwed up. I still bought it. I took longer watching movies and reading directions than actually putting it on. Yes, there is "stuff" on the threads, making it impossible to turn by hand. Yes, I had to find the right size allen wrench in order to avoid damaging the heads. Yes, I had to screw the screws into the nuts and take it on and off several times to get the spacing just right. All of this took about three minutes. A Geissele free float handguard that I mounted to now appears to be a component of the guard.
4.4/5
All mounting hardware included; Made in USA
Can also be installed on Commercial-Spec MOE/CTR stocks, but may prohibit use of fully collapsed position due the extended, slanted back of most commercial-spec receiver extensions
NOTE: Not compatible with MOE Fixed Stock
Optional replacement butt pad for the CTR and MOE Mil-Spec stocks as well as the original UBR, all STR, ACS-L and ACS stocks
Designed for enhanced shoulder purchase as well as offering slightly improved recoil reduction with its thicker, vented construction
$234
Exceptionally well-made with excellent fit and finish. So why only 4 stars rather than 5? According to the description, the thicker, vented construction rubber is "designed for greater shoulder purchase as well as enabling improved recoil reduction." Even while I would concur that it will enhance shoulder purchase, enhanced recoil reduction is unlikely. The so-called rubber has no "give" at all and is approximately as hard as the plastic stock it is attached to. Magpul makes buttpads in three different thicknesses (this one being the thickest), and it's probably safe to say that it doesn't matter which one is used for recoil reduction. My own installation gave a Magpul CRT-style butt stock a very good finish. Be aware that the CRT-type buttstock does not come with an end plate, therefore a buttpad of some sort is required to "finish" off the buttstock and make it appear more visually acceptable. I'm not personally aware of if other Magpul buttstocks include buttpads or not. I can say that while it is a well-made piece of "furniture" for your AR-type rifle, you shouldn't count on it to reduce recoil. Quality, fit, finish, and appearance all receive four stars.
4.4/5
All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer mounting locations is included
Designed for use with all M-LOK compatible mounting locations
Beveled ends reduce snagging and eliminate sharp corners and edges
Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight
Allows the attachment of various 1913 Pica tinny spec rail-mounted accessories such as lights, vertical grips, etc.
$234
This is mounted on my CZ Scorpion (with micro kit). I've mounted a laser and flashlight on it. Excellent for mounting additional devices.Installation advice: Install the screws partially, then, once the screw has been inserted into the slot, insert or spin the nuts.Hope this is useful!
4.3/5
Offset rail mount for mounting flashlights to rail equipped rifles or shotguns
Mount is 1" in diameter, 1.8" in length, 1.6" in height, and 1.6 ounces in weight
Crafted from high quality, lightweight aluminum
Mounts to any standard Picatinny 1913 rail, with the flashlight offset to the side
$234
This mount performs above expectations. I ordered despite expecting rubbish given the price because there were so many positive reviews. It holds up well.Additionally, I want to draw attention to the fact that you can tell it's not the part but the person if you go through the negative reviews. One man claimed that it interferes with his sights and provided a photo of it mounted on the top rail. rather than away from the side rail. It's not designed to be attached there, obvious you stupid. Another issue is that the rail screw is hand tightening and comes off after too much recoil. However, I immediately found that you can use a glock tool to get it really tight by inserting it into the tiny holes.I also think it's important to have a good setup and practice using it until it becomes second nature, so now that I've made sure I like it, I'm going to take it apart and use locktight on all the screws—not because I have to—since I tightened it with a glock tool and because I like the added security.(I used my rail sling in the same way)So, in a nutshell, I simply wanted to say that I think this is a really great mount at a great price.
4.3/5
Used to clearly signal your firearm chamber as empty to others when not in use
Chamber flag for use with most common rifle and pistol calibers including 9mm, .45 ACP, 22lr, .223, 5.56, and .308
Crafted from hardened polymer composite material to withstand use with the most rugged of firearms
Also includes a slide-on Picatinny rail adapter for conveniently storing your flag between uses without losing it
Includes built-in flathead tool adjusting rifle scope windage and elevation
$234
Here's a great value! especially given that you receive 6 of them. I enjoy how simple it is to connect them to a keychain, molle system, or other item. You can also mount them on a Picatinny rail, which is useful at the range. They have so far fit in every gun I've used, including rifles and pistols. even the tiniest pocket 380 ACP.They appear to be of excellent quality and are made of a very durable plastic. Although I wouldn't necessarily drop your AR's bolt onto one of them, they are quite strong and I don't foresee any problems.Some of these have a "empty chamber" keychain attached, which makes it crystal clear to the range officer whether or not your weapon is empty.I wholeheartedly endorse them. 5 stars!
3.8/5
Gain proper eye alignment or gun fit
Built-in swivel stud access for sling attachment
(5) various sizes of foam cheek pads for increased versatility
Improves shooting comfort by reducing felt recoil
Easy to install, no velcro or plastic buckles
$234
Functions as promised. raises the comb to properly join the cheeks. simple installation Comparable in weight and price as an adjustable stock. There are two minor issues: the foam will somewhat deflate under heavy, continuous cheek pressure, however this would only be a problem during lengthy prone shooting. The placement of the cartridge loops is another problem; as you can see from the image, they get progressively smaller as they approach the back of the stock. Actually, this is a problem. They ought to be equal. The purpose is so if the rifle runs out of ammunition, a stock cartridge holder like this one can be used to quickly port-load. With some skill, the shooter may remove a cartridge from the carrier, place it in the loading port, and fire without lowering the rifle or losing their line of sight. It takes less than 2 seconds to complete. The back cartridges' lower location makes them more challenging to access, which is the problem. Unnecessary despite the fact that it is a minor issue. This stock cartridge carrier should be straight across the back like nearly every other one in existence.
3.8/5
Improves gun fit, shooting accuracy, and comfort
Fully adjustable with 5 various sizes of hi-density inserts
Heavy-duty neoprene, reinforced construction
$234
I recently bought my third of these cheek rests. I already have two in camouflage, and a third is on the way in black. These are sturdy things. The thick check rests with the straps and sturdy material are not my favorite. This satisfied my want for something smooth and form-fitting. Neoprene is a tough material, bar none. If you frequently use your rifle in the outdoors, it will give you the durability you need, but it will also keep a low profile if you're like me and don't like all the bulky straps, ammunition holders, and flaps, etc. It's also really comfortable. Most importantly, this thing remains put; if the pads are seated properly, it won't move at all, at least in my experience, as I often fire prone or from a bench at the range. However, I'm convinced that it will hold up in the woods when moving through brush and dense areas A big thumbs up for this The only drawback, in my opinion, is that it seems a little overpriced for the limited functionality it offers, but I wasn't searching for the extras that some cheek rests include. This definitely satisfies my criteria for a low-profile, comfy, and long-lasting item. BUY IT.
3.4/5
Engineered for Speed, Beveled for Fast Reloads
Keeps Debris Out
Fits Full Size and Compact Generation 4 and 5 Glocks *Will not work with the replaceable backstraps
GEN 4-5 Grip Frame Plug fits Glock 17 19 22 23 31 34 35 *Fits only Generation 4 and 5*
Fixxxer Components Brand, Guaranteed. Fixxxer Components is a TRADEMARKED brand of Fixxxer LLC, US Trademark #86021760 under Goods and Services IC 013. US 002 009. Unauthorized use or representation of its mark or products is prohibited
$234
This plug fulfills all of its stated functions (or on the webpage, in this case). As others have mentioned, my Glock 45 initially didn't snap into place. I then started trying to fix it. To fit in the grooves on the 45, which appear to be narrower than usual, I chopped down the sides. I then removed a small amount of material off the nub itself. You can see how it appears after in the photo, and my Glock 45 now snaps in normally. No way does it merit all these two-star reviews claiming that working on it for two minutes will make it work with the 45. What else can be said about it other the fact that it's a sturdy piece of plastic?
COPYRIGHT © 2019
