4.7/5
Gasket included for smooth surface applications
Waterproof "O" ring seal
fits aluminum, fiberglass and carpeted lids
Stainless steel stem
Toothed and "Double-D" shaped mounting for carpeted lids
$234
I added three locks on my old boat. Last weekend, when I utilized the boat, there was some choppy water on the lake on Saturday.One pair of washers and nuts had already adjusted themselves down the bolt when I went to lock the compartments. The gear that was supposed to lock the battery compartment vanished into the bilge when I tried to use it. Make sure the nuts are tight. To prevent this from happening at the other locks, I might install a lock nut to the end of the bolts. I'm appreciative that the package contains two pawls. I'll apply the second one to the storage space in back.
4.7/5
Pre-drilled 3/16in mounting holes
Fasteners not included
1-3/8in W x 9-3/4in L x 2-1/4in H
Mounts almost anywhere
$234
In a 200-year-old home, I bought two of these handles and mounted them horizontally at the top of a stairwell. I wanted a little bit of security as we navigated the stairs. These handles are excellent at what they do.They feel wonderful to the touch and are incredibly smooth. There is a crisp finish. Two holes have already been predrilled. The absence of screws was a small annoyance, and Whitecap should look into it again. What ought to be a 5-star review was reduced by one rating because there were no screws.Overall, I'm quite happy.NOTE: I paid full money for this product; I received no other kind of payment for my review.
4.6/5
Dimensions: 4" H - 3 1/2"ID, 4 1/4" OD, with flange
Replaces plastic drop-in cup holders with ease
Made of stainless steel for supreme corrosion resistance
Amarine Made Stainless steel self draining recessed cup holder ;Install almost anywhere; table, counter top, dashboard, seatback, etc.
Includes drain with hose barb, mounting gasket and internal pad
$234
Over the past two years, I believe I've bought 14 of these stainless steel cup holders for different boats, and each one is still in excellent shape. They were a perfect fit for the typical hole size. A 3 and 5/8" hole saw is what you need if you're making a "regular hole size." Here are some suggestions for drilling through fiberglass:1. Cover the area you'll be cutting out with painters tape. It will prevent the drill bit from wandering about and scraping up the gelcoat, which you work so hard to maintain.2. The ordinary drill bit will be in the centre, and the large, loud hole saw bit will be on the outside if you're using a standard hole saw bit for your drill. Once you've used the center (smaller) drill bit to cut through the gelcoat, switch to reverse to let the drill to cut through the initial layer of fiberglass before reversing to forward to remove the most of it. The likelihood of it cracking and spreading out all over the place will be reduced by first running it in reverse. Usually, the cut is considerably cleaner.3. Execute the drill at a slow pace. Don't be too aggressive with it because you're removing a lot of material. You'll probably overhead the bit, and the saw will become angry (both literally and figuratively).The bottom of these cup holders has a great drain hole. While I don't believe it would have come off merely by the pressure it took to slide the hose over, I did run clear tubing to a drain hose or to the deck as necessary and secured it with a stainless steel hose clamp. If the hose you purchased is too narrow for the drain, you can extend it around the drain by heating it briefly with a lighter or heat gun.Overall, these items are a complete steal and improve the appearance of any boat. Grab them now while the pricing is still available!
4.6/5
3.1 inch Strip Type Eye Plate with Enclosed Hook, Well Constructed, Secure, High quality heavy duty 304 stainless steel processed, Smooth surface without burrs, durable and rustproof.
Suitable for wooden ceilings, concrete ceilings, brick walls, boats, hammock chairs, sling ropes, wire ropes, chains, hanging plants, indoor or outdoor installation.
All Hulless products are fulfilled by Amazon with 100% guarantee fast shipment and good customer service.
Wide Application - Our Pad Eye perfect for various kinds of buckles, quick links and links, Mainly used for ceiling & wall mount hanging hardware fitting, also used in small yachts and boats.
Package - 4 pcs ceiling hooks and 8pcs mounting screws and 8 pcs Ribbed Plastic Anchors, Pad length: 75mm; Pad thickness: 3mm; Loop bar Diameter: 9mm;Screw Size: 5mm, Load-Bearing: 120 lb.
$234
The eye plates are strong and appealing. For that eye plate, the accompanying #6 screws are inappropriate. They need to be either #12 or #14 which I have bought separately. Either the merchant provides the correct size screws, or they don't. Keep in mind that structural lag screws can be used to fasten these eye plates. Other customers have noted that the provided screws will pull out under strong weights before the eye plates do.
4.5/5
1-1/2" square pre-galvanized uprights, angled out at 75 Degree
2'' x 4'' x 60" boards tilt to hug the hull and are covered with high grade marine carpet; Boards are untreated Southern Yellow Pine
Height of 21'' with adjustment out to 13" from frame on each side
$234
A big thanks for loading my boat! The intercoastal channel where we launch has swiftly moving tides, boat wakes, and wind. These aid in centering and aligning the boat on the trailer. Why I didn't have them before is a mystery to me, but I won't ever be without them. The mounting of them on my trailer was the only issue I ran into. The cross beams of the frame are not parallel and have different angles between them. In order to add a bolt to angle the beams for a suitable fit, I had to cut the ends off of the one that was closest to the middle of the boat and drill and tap the ends. The locking nuts and lengthy u bolts are the only issue. If I had it to do over, I would have swapped them out for a regular nut and lock washer. I could write a book of advice on what to do and what not to do, but I'm too wordy. Best of luck! fantastic stuff
4.3/5
Adjustable design holds your drinks (cups, cans, etc...) max 4" diameter. Folds to protrude only 1-Inch when closed, save your space.
Each cup holder includes 4 of 0.63-inch length stainless steel screws. For your safety, do not recommend using double-sided tape strips install.
Black, brown, grey, and khaki available. 1-Pack, 2-Pack, 4-Pack available. Great for boat, RV car, truck, game tables and more...
GSE Games & Sports is the US based seller with US customer support, 30 day easy return policy, 100% satisfaction guaranteed.
Our folding cup holder made from resist transformation, abrasion and strikes plastic material. The plastic construction is totally waterproof and easy to clean.
$234
I bought a grey one that was packaged in a four-pack. Each plastic cup was packaged separately in a sealed plastic bag. Each bag contains a little bag containing four mounting screws. They only measure 5/8" in length. They were mounted on a wood pole. When I tried them with common beverage sizes between 12 and 20 ounces, they held up well. Once lowered, the top portion of the holder is adjustable to fit different-sized containers. I try to be cautious and move it carefully when adjusting just in case.
4.3/5
ã€Material】 Each part of this pad eye straps crafted out of good material with 316 stainless steel, strong anti-corrosion and rustless,and no sharp edges to catch on clothing, ropes, cargo, fishing lines, etc,. Suitable for indoor and outdoor applications.
ã€Safe and Durable 】Two kinds of types, 5mm and 6mm.Once the bimini straps are screwed, it is sturdy enough to hang heavy duty. Tying the boat to dock still outstanding stays in one place and strength to hold in a strong wind.
ã€Multifunctional Tie Down Loops】great tie-down points.Suitable for Outdoor:can be used to strap down a cooler to our trailer,used on the boat for hold down bimini top, or hanging shade sails and more.Suitable for Indoor: Hanging photo frames, keep the safety of hanging lights in the air.
ã€Package Including】 8 PCS 5mm stainless steel bimini boat top eye pad + 8 PCS 6mm eye pad+ 32 PCS stainless steel screws,it accepts Lanyards & Ropes Up To 3/8".
[Easy to install] The boating accessories are very compact and easy to install. Just put the eye pad into the positioned as desired and punch down the screws.Also provide super friendly customer service, if there is any concerns about this item please feel free to contact us.
$234
Good for the kayak for a number of reasons. I don't trust the rivets and screws I used. I had to drill wider holes to accommodate the 3/16 kayak rivets I had to order. However, I would choose stainless over plastic.
4.3/5
Machined AISI 304 stainless, Come with adjustable finished nuts
Includes 2 flanges and all 4 nuts.
max safe load is 3,500 lbs
Amarine-made Bow Eyes come with adjustable finished nuts as compared to the crimped ring used on most bow eyes.
1/2" and 3/8" optional, more size see pictures
$234
Completely reliable product.on my 15-4 Gheenoe, installed. With minimum maintenance, six months later, there is still no sign of rust. Although this size was excessive for my needs, you'll never catch me worrying that the item isn't sturdy enough. This is a sturdy object.This product comes in numerous versions. Some have washer plates instead of actual washers, others have washer plates. You are essentially free to choose. This style was perfect for my Gheenoe, but the others might have also been effective.This length was purposefully ordered too long for my use. These bolts are also quite lengthy. Most individuals won't require so lengthy bolts. In order to attach a strap with a hole to fasten other objects at the bow anchored from this object, my intention was to install extra washers and nuts on the interior. That is mostly a 50-pound or more battery case. This has worked out perfectly thus far.Overall, if you require the extra length, I would highly recommend this item. Otherwise, you could usually get away with anything that is an inch shorter.
COPYRIGHT © 2019