4.7/5
Package include 2pcs Boat Ring Drink Holder,made of high quality stainless steel.
Opened Designed with "L" shaped export, is convenience for the cups that with handles/ears put in and take it out.
Install it in Boat/ Yacht/ Truck/ Car/ Apartment/ RV,..etc.
Suitable for a variety of sizes cans, mugs and Cups.
$234
I like the concept. This is a poor example of execution. Since the bottom needed to be somewhat flat, I had to mount mine crooked rather than straight. Nevertheless, they manage to hold the drink while maintaining a decent appearance.You'll need a drill extension to install them, but you can also attach the screws without the holder by using an old-fashioned screwdriver.
4.6/5
High quality 304 stainless steel, sturdy and durable
Suitable for most Cans, Mugs, Glasses and Cups
Chromium coating enhances the cup holders brighter and more anti-rust
The package includes two cup holders and 8 screws for easy installation
Length:3.35" (85mm), Width:3.11" (79mm), Deep:3.03" (77mm)
$234
Our outdated work truck lacks cup holders. The larger drinks would simply spring them down and destroy them when we tried to mount some of the plastic cup holders. These cup holders perform admirably. extremely robust structure. I bent one of them to help us attach it to the truck's dash, which made me extremely happy:)
4.6/5
Fits in 1 inch mounting hole
Include: 1 latch, 1 keeper, 2 keys, 1 pull tab.
For 0.00"-0.407" Door Thickness
Replace 93-303 93-307
Commonly used on glove boxes and radio boxes. RV's, Boats, Golf Carts and more!
$234
My old keys work with the new lock, and the first one lasted for two years. They are reasonably lightweight and inexpensive. Now, I figure any key like that would work to open it. I suppose that will deter good criminals from entering.
4.2/5
Includes (4) Stainless steel eye straps
Use in a variety of boat or household applications
Great for securing and holding down items
$234
Before they arrive, it's difficult to properly grasp how big or small these are. Photos ought to be taken while using some references.They are difficult to locate, even in boat shops, and the cost would lead one to believe they were gold-plated.The correct size rope fed through would not experience any friction because they are nicely shaped.Use stainless fasteners and keep the tool receptacles clean or use stainless drive bits to prevent rust and discoloration of the stainless caused by microscopic ferrous metal fragments from the screwdriver.
4/5
★ã€Storage box】 Silver socket, silver cap and silver snap with 304 stainless steel head screw, 50pcs for each part. Total 150pcs=50sets,and 2-pieces setting tool.
★ã€Application】 These snap fasteners and tool are used for furniture, canvas, fabric, boats, outdoor, and more. Fit for both the indoor or outdoor use.
★ã€Size】 Screw : Diameter 3/19â€(4mm), Length3/8†(10mm)Length 5/8†(15mm) with Phillips head screw; Socket Diameter 3/8†(10mm); Cap Diameter 5/8†(15mm).
★ã€Materials】 These snaps' screw and setting tool are made of high quality stainless steel and the socket,Galvanized steel screw with nickel-plated steel snap for superior rust & corrosion resistance.
★ã€Lifetime Gurantee】 We stand behind all our products and value each customer. if you have any problem we will replace it free of charge!
$234
I've had boats for a long time; in fact, I spend the winters in Miami living on a boat in a marina. Boats require ongoing upkeep. To keep things in order, something is constantly required. Naturally, the higher the quality of any fastener used to fix the boat, the easier it will be to reduce maintenance in the future.Our yacht has a lovely aft deck that resembles a porch. We enjoy conversing, eating, and drinking outside. However, the sun's glare from the west begins to get too warm around noon, making it uncomfortable to sit outside. Needed? A sun screen that provides significant shade and actually increases the level of seclusion on the dock from onlookers.I thus ordered a standard-sized sun screen from Amazon that was the right size for my area and the Selocky Metal kit to attach it to the fiberglass of the aft deck.They applied without any issues, accepted all the necessary procedures, and retained the sunscreen in place. We are quite happy with the outcome.
3.7/5
Provides boaters with a lasting seal on the water.
Concentric rings snap-lock in place for tight leak proof seal in 1″ diameter opening.
An industry benchmak in quality and durability.
Designed for use with Moeller’s Snap-Tite, Turn-Tite and trail-n-Bail Plugs.
Flanged 90 degree on one end to function as a drain for transom, motorwell, livewell or baitwell.
Installation requires a Drain Fitting Kit (20848-001) and flanging tool.
$234
After twenty years, the water stop plug on my old motorwell drain tube cracked. I went to West Marine and found a replacement for roughly twice as much money. I considered checking Amazon to see whether it was offered. The World's Biggest Store responded, so I placed my order right away. To get a precise fit, follow the installation instructions. It resembles the original plug exactly. I'm hoping to utilize this one for at least another 20 years.Notes for installation:1. Take out the old drain tube and scrape off as much caulk and sealant as you can.2. Insert the male end into the hole that has been cleaned inside the boat.3. Use a permanent marker to indicate the thread where the male component exits the boat on the outside. Trim the male component till it fits (see the directions for the precise amount). I believe it was 1/8 inch from the thread mark.4. Apply silicon caulk to the thoroughly cleaned drain hole. Caulk the male and female parts that come into contact with the boat.5. Insert the male piece until it is seated (from the inside).6. To get seated, press on the female piece from the outside (the threads will lock the two pieces together).7. Make sure the fit is snug by applying pressure from both ends. To guarantee a tight seal around the tube sides and end, caulk should be flowing out on both ends.8. Remove extra caulk from surfaces, including any that may have gotten within the tube.You've finished. Put the male and female components apart since doing so will weaken the thread binding after they are connected.The entire task took around 15 minutes.
3.7/5
It can be used on panels 12 to 17 mm (.47-.67 inches) thick.
This stainless steel latch is non locking, flush mounted and uses 2" cut out
It includes all hardware needed to install (screws, mounting plate, and lock plate)
The face measures 2 3/8" in diameter.
Installation instructions are not included.
$234
What I needed was exactly this! The lock was absent from the new teak swim platform that arrived with my Malibu Wakesetter. This lock fit wonderfully because the hole was already predrilled. Does not have any sharp edges that could cut someone's foot and fits flush against the swim platform. Simply raise the lock and lower the wedge to the water when it's time to wakeboard or surf. operates smoothly both in and out of the water. 100% would repurchase
COPYRIGHT © 2019