Best Billiard Cue Racks in 2022

Last update: January 2, 2023

Can a warped cue be fixed?

A warped cue can be fixed by straightening it out using a cue straightener. You can also try to fix it yourself by gently heating the cue with a hair dryer and then bending it back into shape. If the cue is severely warped, you may need to replace it.

Can I fly with my pool cue?

Whether or not you can bring your pool cue on an airplane depends on the airline. Some airlines allow small sports equipment like pool cues as a carry-on item, while others require it to be checked. If you're unsure, it's always best to check with the airline before you travel.

How do you check if your cue is straight?

How far apart do you mount pool cue rack?

There is no definitive answer to this question as it depends on the size and shape of your pool cue rack, as well as the size of your pool table. However, a good rule of thumb is to mount the rack so that the cues are approximately 18 inches apart.


Flintar Wall Cue Rack, Stylish Premium Billiard Pool Cue Stick holder, Made of Solid Hardwood, New Improved Wall Mounting Hardware L Bracket Included, Cue Rack Only, Choose From Mahogany, Black or Oak Review:


Attractive price for a rack that is well-made and finished. Before seeing this, I was considering creating my own, so I'm glad the excellent evaluations were accurate. I made the decision to hard attach to the wall after reading mounting review articles and examining the packaging. It is 16 inches if you measure from the space immediately to the left of the left upright to the space immediately to the right of the right upright. I removed the two triangular mounting loops on the horizontal cue bracket after first finding two studs sixteen inches apart. I then drilled a 16-inch-diameter hole 16 inches apart on either side of the horizontal cue bracket, between the cue holding clip and the right and left vertical brackets. To firmly fasten it to the studs, I used two two-inch drywall screws and a level. Black drywall screws that are effectively concealed by the cue and upright match in with the mahogany finish quite well. I didn't require the tiny L brackets on the base because it is tightly fitting. I'm very happy with it and have already had remarks on how it looks!



Standard 6 Pool Cue Stained Wood Wall Rack with Clips Review:


Don't expect a fine furniture finish, but the unit itself has good wood quality and an adequate polish. The clip alignment with the cue butt side of the set is the feature of the product that irritates me the most. If you lay one over the other, some of the clips, in my case two of them, were off from the butt side by as much as a 1/8"; however, if you want your cue sticks to be perfectly straight, you'll have to remove the two mounting screws from the clip, move them over the center of the butt depression, drill two new holes, and replace the screws.



Cue Rack Only - 10 Pool - Billiard Stick & Ball Set Floor - Stand Choose Mahogany, Black Or Oak Finish Review:


I recently purchased your "Rush Creek 6 Pool Cue Floor Storage Rack and Pool Ball Holder - With 4 Cup Holders" from Amazon and put it together.fantastic stuffThe pros are as follows:1. Fantastic appearance, finish, and REAL WOOD!!2. Requires less room.3. Simple assembling4. Excellent value for real wood, not Chinese fakes.5. American-made. Encourage American manufacturing. The caliber is excellent.Cons? There aren't really any drawbacks to this product, but here are some suggestions for this rack.1. Triangle and 9-Ball Rack - It would be wonderful if it had a hook or other attachment to hang on the rack.I can leave the pool chalk in the cup holder, but there isn't room for drinks or glasses.3. Provide a variety of possibilities using sticks or pool cues that are larger than 4x, such as 6x or 8x.I possess 6 pool cues. I'm donating the other two because I'm unsure what to do with them.-It would be fantastic to offer a 6 or 8-cushion rack.



Fat Cat 2-Piece Wall Mounted Hardwood Billiard/Pool Cue Rack, Review:


These cue holders for walls look good and are made to last. With the provided hardware, I was able to hang these in a couple of minutes and mount my cues. Only a drill, a phillips head screwdriver, and sometimes a hammer are required additional instruments. The drill is used to drill pilot holes for the wall anchors. The colour matches the pictures and the images are correct. I'm pleased with the buy overall.



Cue Rack Only - 10 Pool - Billiard Stick & Ball Floor Rack - Holder Choose Mahogany, Black or Oak Finish Review:


It was the stick holder. Didn't even need the instructions; assembly was simple. everything appears fine. does precisely what it should!if a customer anticipates a more expensive goods. You're not getting it, exactly. The stain match-style Only my best friend, a professional painter, noticed that the alignment of the top to the bottom was slightly off. You won't be able to tell if you're seated in the corner, I promise!It's shorter than I anticipated, but that has no bearing on its form or functionality; it still has a lot of appeal.



Cue Rack Only - 6 Pool Cue - Billiard Stick Wall Rack Made of Wood Choose Mahogany, Black or Oak Finish Review:


As a result, this rack is extremely affordable in comparison to any other I could locate, and given some of the evaluations I read, I thought I might need to do some work on it. Given that I have the necessary tools and expertise, I have no problem altering anything (albeit limited). I should start by mentioning that I believe the manufacturer has addressed some of the problems that others have reported, that I haven't noticed any dents or dings, and that it arrived with bottom mount brackets in addition to top mount brackets. I bought the black one, and I did give it a tiny chip, but a permanent marker took care of the issue immediately. Aside from that, it's precisely what I would have anticipated receiving and could have been installed with no problems using drywall anchors. Since every piece had pre-drilled holes, they all fit together perfectly. Although there were instructions, they were not required.For stuff like this, especially because it's broader than 16, I prefer to hit the studs "so I changed my. The two top brackets, which are really just picture frame holders (see the images), were removed, and I relocated them to position 16 "I slid them down to conceal them below the wood and also spaced them apart so I could strike two studs. When it is hung up, you cannot tell that it doesn't sit flush against the wall. I didn't have to worry about it because I had already predrilled a little hole to prevent splitting (which other reviews had mentioned as a problem).I hope these photographs will be helpful. Although the cue rests at the bottom are of quite low quality, I decided to give this product 5 stars since I believe it deserves a little more praise than it has received thus far based on the other reviews.



6 Pool Cue Rack - Billiard Stick Wall Rack Billiards Pool Cue Rack, (Multiple Colors Available) Review:


Nothing particularly noteworthy; although functional, I believe the pricing is a touch high. Although there was very little cosmetic damage when it was received, the packaging should have been better (pieces of thin Styrofoam between pieces needed; on end at minimum).I have it in a garage, where the bottom sometimes "kicks out" when a cue is removed, but I don't think it would happen if it were put over carpet. To avoid this, the hardware that was given to fasten to the wall at the top could have been easily replicated and mounted in the middle on both sides. I'm VERY happy with how precisely the screw holes were drilled to match the corresponding parts. That is really saying something coming from a Q.A. Manager at a machine business.


How high should a pool cue rack be?

A pool cue rack is typically mounted at eye level, or slightly above. This allows the pool cues to be within easy reach, while also providing a clear view of the pool table.

Is there a way to straighten pool cues?

What are the holes in a pool table called?

The holes in a pool table are called pockets. There are six pockets in a regulation size pool table, three on each side. The pockets are located in the corners and in the middle of the long sides of the table.

What causes pool cues to warp?

There are a number of reasons that pool cues can warp. One of the most common is simply exposure to heat or cold. If a cue is left in a hot car, for example, the heat can cause the wood to expand and warp. Similarly, if a cue is stored in a cold basement, the cold can cause the wood to contract and warp. Other causes of warping include improper drying of the wood (which can cause the wood to expand and warp), and damage to the cue (such as dropping it or hitting it against a hard surface). Generally speaking

What does the red dot in 8-ball do?

The red dot in 8-ball is the cue ball. It is used to hit the other balls on the table and is the only ball that can be pocketed.

What is a push in 9 ball?

A push out in 9-ball is when the cue ball is hit with enough speed to reach the far end of the table, but not enough to make it all the way around and come back. If the cue ball is hit with too much speed, it will come all the way back around and hit the cue stick again, which is a foul.