4.8/5
Less than 500 part numbers cover more than 1,200 applications to maximize coverage and reduce inventory
Installs without buckling, bending out of shape, or straining at the connection for easy installation
Has all the quality features of a regular coolant hose for interchangeable use
Its diameter ranges from 1/4 in to 1 in to fit different types of vehicles
Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
$234
Over the long Labor Day weekend, I took off the splash protection under the engine after hearing an odd noise coming from the a/c compressor. The compressor was moist and oily, I noted. September in Houston meant highs in the 100s, so it was evident that I needed to replace my 11-year-old Denso. But I soon realized that the compressor had been saturated by engine coolant, and that this line was dripping coolant onto the plastic, especially when the engine was running. Hey, I'll accept half that from this replacement as this hose was a perfect replacement for the previous one in the pickup that lasted 11 years. You should get the quick detach tool instead of the heater hose puller made by OEM, in my opinion. I didn't require it to remove the hose from my GMC. One of the hoses must be reconnected to the heater core in the firewall using the OTC 6046 fast disconnect hose clamp and Dorman 800-409.
4.6/5
Black 4-Ply Reinforced High Temp Silicone Coupler
3" / 76.2mm Coupler Length provides proper tube engagement and added clamping area.
150 PSI Max Pressure Rating / Temperature rated to 350*F or 177*C
5mm /.2" thick reinforced 4 ply silicone for heavy duty applications.
4 Inch / 102mm Inner Diameter
$234
My jet ski was returned to me after a family member had borrowed it for a weekend with all of the rubber boots burned off the exhaust (thanks). This silicone boot performed fantastically to replace the burned-out exhaust boot. Although it was difficult to put on, once it was there, it held up admirably.
4.6/5
Item included: Vacuum check valve breather hose assembly x 1
Reference Part Number: 058 133 784 AF , 07C 133 529 A, 06B 133 783 BC, 058 133 753 D, 058905291D, 058 133 784 P, 058 133 394 D, 058 133 783 L, 07C133529A , 058 133 394 C , 058 133 753 B, 058 905 291 , 058 905 291 K
Warmnote:Pls measure that the OE Number and the item picture fit your car before purchase.
Compatible:1997-2005 VW Passat B5 1.8T, 1999-2008 AUDI A4/S4 1.8T, 1998-2005 AUDI A6/S6 1.8T, 2002-2008 SKODA Superb 1.8T, 2009-2014 SEAT Exeo 1.8T.
Feature: 1) According to the original factory specifications. 2) Perfect match for the original car. 3)Stable characteristics, high reliability.
$234
The 3-way check valve is composed of very breakable plastic, despite the fact that the hoses and clamp are all of high quality. When attaching the hose to the side narrow connector, extreme caution must be taken to avoid breaking it. Although it is difficult to assess the quality of the suction jet pump valve, it appears to be fine. Additionally, they utilized one-time clamps on every hose, which makes it extremely challenging to remove them.
4.6/5
2.25 Inch / 57mm Inner Diameter
Black 4-Ply Reinforced High Temp Silicone Coupler
3" / 76.2mm Coupler Length provides proper tube engagement and added clamping area.
5mm /.2" thick reinforced 4 ply silicone for heavy duty applications.
150 PSI Max Pressure Rating / Temperature rated to 350*F or 177*C
$234
My jet ski was returned to me after a family member had borrowed it for a weekend with all of the rubber boots burned off the exhaust (thanks). This silicone boot performed fantastically to replace the burned-out exhaust boot. Although it was difficult to put on, once it was there, it held up admirably.
4.3/5
Features 90° angle
Size: 1-1/2" x 3/4"
Swivel drain connector
$234
Exactly what we required for the Coleman/Fleetwood pop-up trailer's drainage spout (from sink).Using a female hose bib, we attached a small (12–18â€) segment of old hose to the end of the hose. The hose is then connected to this drain spout after the trailer is set up, and a container is placed underneath to collect the grey water. Make a hole in the top of a five gallon bucket with a cover so that the hose end can fit through. It protects the bucket from nocturnal animals.
4/5
Replace only the connector, not the entire heater hose assembly
Fits a wide variety of applications
Also available as part of Dorman's installer tech tray
Direct replacement for ease of installation
$234
This component is a high-quality substitute for GM Original Part Number 15055343. Fortunately, with the proper Heater Line Quick-Connect Release Tools, it is rather simple to access and replace these parts when they inevitably break due to GM's poor design. If a rapid release tool is not available, a new part can simply slide on once the existing part has been cut off. Before installing a new item, make sure the O-rings are lubricated.
3.5/5
Provides a fast, easy way to connect replacement heater hoses on cars and trucks
Three sizes for more coverage and broader applications
Its design retains O-rings for added durability
$234
My 2004 Yukon XL Denali was able to use this item. Both Autozone and Amazon did not have the right part listed. This component fit PERFECTLY. If you have a 2004 Yukon XL Denali with the 6.0 engine and your outboard heater hose is broken off, do not purchase the Dorman part 800-403. I'm not sure about other models, but I'm certain that Dorman part 800-403 won't suit my car since the inside diameter of the Dorman part is just a tiny bit smaller and it won't fit onto the tee fitting. Not because of the price, but rather because I would have to wait two days and still have to find the correct part if it didn't fit, made me anxious when I placed my purchase. However, the ACDelco 34000 was a perfect fit. I hope that this is useful to someone else who is looking for the proper part.
COPYRIGHT © 2019