Best Outdoor Kitchen Access Doors in 2022

Last update: December 3, 2022

Wallo 4 X 4-Inch SMALLEST Plastic Access Door, Hinged Access Panel for Drywall Walls and Ceilings. Perfect for providing service area for Plumbing/Wiring Applications and Electrical Access Panels Review:


I used this to cover a hole I had to make in our bathroom closet so I could get to the plumbing for our bathtub. It was simple to install and durable, requiring only a small amount of sticky caulk. In addition, it was simple to reduce the access door's depth in order to fit it around a stud that was occupying a portion of the hole. Great results!



Oatey 34044 Access Panel, 14 X 29-Inch Review:


I live in Illinois, but I flew down to Florida to paint a relative's condominium. I bought this for that project. The renter above "our" condo had a leak in their tub or shower, or whatever, and plumbers had to access their plumbing in our unit. As a result, the master bathroom's shower ceiling had a hole in it. Sadly, the plumber(s) who completed the project must not have had much expertise drilling holes in drywall since they created a massive rectangle that was entirely off in every manner, although it was only approximately 24" by 14".Since I only had so much time to paint the entire condo and I couldn't leave this ceiling looking like this, I made the decision to install an access panel so that if the issue ever recurs, it will be very simple for them to reach the problematic region. Before finding this on Amazon, I went to the closest Home Depot but all they had were 14x14 or 8x8. As a result, I was expecting to have a small drywall project on my hands. Thankfully, I discovered it and placed my order. Thanks to Prime, it arrived in 2 days, and all I had to do to install it was fix the crooked hole they had made and slightly widen it.The only problem is that this item doesn't come with any mounting hardware, so I mounted it using 8 drywall anchors, stainless screws, and DAP interior/exterior construction adhesive. After giving it 24 hours to dry, I did not like the way the screws looked so I removed them, but the glue still held it in place. I installed the door, filled the eight screw holes I created, caulked the trim around the access panel's corners where it meets the drywall, and made sure there were no gaps. I then painted the ceiling of the shower as well as the area directly above the access panel, and it looked very good. Unfortunately, I'm concerned about how well the adhesive will stick when people take showers, so we'll just have to wait and see. If the adhesive doesn't hold, someone might need to reinstall the screws at some point. The other drawback, if you can call it that, is the size of this access panel with its trim. I've never seen an access panel this big, hehe. If the plumbers ever need to work again, they should have plenty of space.Hope someone finds this useful. Take your time and build a quality access panel.:)



MaRoner Reinforced Hinged Plastic Access Panel for Drywall Ceiling 4 x 6 Inch White Access Doors Reinforced Hinged Access Panel (4X6) Review:


I cut an access hole in a drywall wall to draw a new thermostat cable, and I used this door to trim out the opening. This door served my project well. Before you start cutting through the drywall, make sure to layout the project, verify the cut dimensions, and look for wall studs. My supply of adhesives had expired, so I mounted the door using double-sided tape behind the flange instead. It worked perfectly. I didn't need to paint the door since I placed it in an inconspicuous location, close to the floor, and beneath a counter top. In addition, my wall is white, so the door blends in nicely without painting. The door and frame both have textured surfaces that appear as though they may benefit from being painted or wallpapered if necessary. My experience with this access door has led me to strongly recommend it.



Wallo 10 X 10-Inch Plastic Access Door, Reinforced Hinged Access Panel for Drywall Walls and Ceilings. Perfect for Providing Service Area for Plumbing/Wiring Applications and Electrical Access Panel Review:


I primarily looked like a rough-cut hole in the wall with a round, metal cover hanging down from it, barely hanging on for my master water valve, which had a 4-inch round hole with a round cover that wasn't fastened properly.This was simple to install once I cut the square hole in the drywall, drilled screw holes in the panel's corners, and located and used my drywall anchors. Construction adhesive is recommended in the instructions, but because this is in a downstairs room, I didn't worry if the screws were visible. Even with the screws exposed, I don't believe it looks that horrible.The entrance door could have been opened more easily, which is the one other thing that would have been good. Before I can access the master valve through this panel in the event of a burst pipe within the house, I might have to sprint and grab two flathead screwdrivers or two or more keys. It is a little difficult to open with just one screwdriver, as I've tried. To get the door to open far enough for me to slip my fingers behind it at the top, I had to wiggle it out of the slot and lever it out with the screwdriver. I continued until the door popped open after inserting the screwdriver in the lower slot. To pop it open, I could have used more force with my fingers, but doing so would have significantly bent the door, and I wasn't sure of its tolerance to stress.Additionally, at a particular angle, the door comes off its hinge too easily. The door can slip out of its hinge if you hold it loosely at that angle as you open it. If you aren't hanging onto the door or if you grasp for it out of surprise, the door may fall into the hole and down inside the wall. Consider planning to take the door off each time you open it. You would be able to hold onto the door and be less likely to let it fall into the abyss if you did so.the hole is covered, there is 10x10" access, and it looks beautiful on the wall.Cons: Difficult to open, door is too easily released from the hinge, and there are no screw tab guides for those of us who would prefer to use those.



Oatey 34055 Plastic Access Panel, 6-Inch by 9-Inch Review:


My second access panel purchase is this one. In my newly renovated kitchen, I used the first to gain access to a socket hidden behind a corner cabinet. Electrical outlets must be accessible per code, thus doing this allowed me to maintain access while simultaneously taking a clean look inside the cabinet. The second panel serves as an access point to pipes in the renovated kitchen in the basement. Since the hole was under the kitchen sink, I decided against patching the drywall in order to maintain access in case something needed to be altered or accessed. It blends in well with the ceiling, and until I pointed it out, no one else has noticed it. The ceiling is a flat white color.A small amount of adhesive (I used Liquid Nails) on the back of the bevel and sliding it in the hole will make it appear very professional and fix the bezel to the opening. The panel has a bevel around the opening, so your hole doesn't have to be exact. It might even take a screwdriver or another similar tool to pry open the access hole in the insert that covers the entrance because it is so firmly fitted and unlikely to come off accidentally. Without having to worry about the insert falling out, this can be installed on a ceiling. Since the insert fits snugly and "clicks" in once it is in place, it can be challenging to reinstall it in the panel surround.I'll keep using Oatey Access Panels if I need them, especially if I need to access any pipes nearby the tube during a future bathroom refurbishment.This is an excellent substitute for mending the drywall if you have to cut into it, and it allows you the ease of future access if necessary.



SUMASAI Plumbing Access Panel Access Panel 8 x 8 inch Access Door with Removable Hinged Door. Durable Plastic Drywall Access Panel Review:


The plumber had to make a hole in the wall to access the pipes from behind the shower when he installed new shower/bath fittings for us. I bought this panel for next-day delivery and was thrilled when it arrived because it did a great job of hiding the hole. After installation, I had 20 minutes until the photographer arrived to take shots of the house. Excellent stuff; prompt shipping. If necessary, I'd place another order.



Suteck Plastic Access Panel for Drywall Ceiling - 4 x 6 Inch White Access Doors Review:


This access panel is of decent quality and is fairly durable, precisely as advertised. Fit perfectly, was simple to install, and was paintable. Despite being of relatively light duty, it is effective. This was the ideal answer for my desire to have access to the hot and cold water controls underneath the hot tub in the bathroom. I made a hole in the drywall and sealed the interior of the frame with silicone to keep it in place. Once placed, the panel looks excellent and served its purpose flawlessly. When closed, they are virtually invisible and quite flush with the ceiling. Installing and using it are simple. The panel is on a hinge, which makes it easy to open but requires a thin object, like a putty knife. Therefore, it makes plumbing easier to access in case further repairs are required. Perhaps you might use it to cover up ugly wall holes, Jacuzzi tub upgrades, plumbing, electrical, or HVAC work, etc. I'll buy a huge size to complete access to the water line because I believe it will enable us to function flawlessly.Perfect and totally worth it for what I needed! purchased with pleasure, highly recommended!!!



Mophorn Double Wall BBQ Access Door Cutout 20 Height x 14 Width Inches BBQ Island Door Brushed Stainless Steel Perfect for Outdoor Kitchen or BBQ Island Review:


This access door for the barbeque is rather good. It is just just big enough to fit a 20# propane tank through, therefore I think I should have ordered a bigger one. The internal attachment holes were too short, which made it difficult for me to install it in a stuccoed block wall. In the end, I had to notch the stucco to fit the door frame and use clips to secure the door while mounting the clips into the block's side (8x8x16" cinder blocks). For extra security, I also added several screws and fender washers (typical overkill for me).