A clamp meter is a type of electrical tester that is used to measure the current in a wire without having to make contact with it. This is done by clamping the meter around the wire. Clamp meters can be used to measure both AC and DC current. Cheap clamp meters are available, but their accuracy is often questionable. Many factors can affect the accuracy of a clamp meter, including the quality of the meter itself and the way it is used. If you are using a clamp meter to make critical measurements, it is important to use a quality meter that has been
A clamp meter is a type of electrical tester that is used to measure current flow in a wire without having to make contact with or disconnect the circuit. Clamp meters are useful for troubleshooting electrical problems and for checking the health of electrical systems and components.
Clamp meters are designed to measure current in a conductor without having to make direct contact with it, making them ideal for measuring current in live circuits. While clamp meters are not as sensitive as other types of meters, they are still able to measure small changes in current.
No, clamp meters cannot measure both AC and DC currents. AC current is measured using an AC current clamp, while DC current is measured using a DC current clamp.
4.6/5
Audible continuity sensor confirms that the circuit conducts electricity
Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit
True RMS sensing meter provides accurate readings when measuring linear or non linear loads, regardless of waveform
Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohms. Does not measure DC current
Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
$234
Here is a water well technician. These are pretty much the only ones we use. Despite moving around in a filthy vehicle, they manage to live. I have compared these to more expensive metres, and they are accurate. I can teach new guys how to use them in under a minute because they are so simple to operate. Long lasting—we haven't changed the batteries in at least two of these in the field where they are used every day for the past two years. This is a great purchase if you use a metre every day but don't need a megger or anything complicated.
4.6/5
â¤POWERFUL FUNCTION: Clamp meter can be used to measure AC and DC voltage, AC current, resistance, capacitance, frequency, duty cycle, diodes, continuity tester，lightweight and full-featured. It is an ideal tool for the majority of users to carry around
â¤EASILY RECORD AND READ：High resolution, backlit LCD display, flashlight function, and data retention features ensure that the meter can perform measurements in dark places;Low battery indication,please replace the battery immediately when the battery is low.
â¤SAFETY AND STABILITY: Complies with overvoltage CATCAT III 600V and Pollution Level 2 safety standards,full-scale overload protection;Pliers head mounting defensive equipment, double insulation, providing you with safer service;Energy saving, the instrument will "automatically shut down" (sleep state) if the function keys and the functions selector dial without any operation in 15 minutes .
â¤OFFICIAL CONFIGURATION:Tacklife CM05 Clamp Meter, Test Leads (Pair), 2*1.5V AAA Batteries, Screwdriver, Black Storage Bag, User's Manual, 24-Month Service Card
â¤NCV SENSITIVE DETECTION: When the clamp head is close to the measured object about 0-5CM , the instrument will emit a different rhythm of the buzzer sound according to the different voltage intensities. At the same time, the NCV light flashes to distinguish the intensity of the voltage.
You can return/replace this clamp meter purchased here within 24 months without any reason
$234
I bought this item following two auto breakdowns. My battery and alternator failed during the first incident, which happened at the West Woodland mall. Two weeks later, the second incident occurred on an arterial. At a busy junction, the automobile came to a stop. Evidently, the replacement alternator developed a fault. Using a multi-meter, my friend who is a 25-year veteran of the vehicle repair business identified the issues.So I made the decision to get one. The commercially available FLUKE models, which cost between a few hundred to a thousand dollars, were out of the question. There were more than a hundred good mid-brands, like IDEAL. Looking at Amazon reviews, the $26 TACKLIFE clamp multi-meter has the best user ratings for the least amount of money.My mechanic was given the tool to test in the field against an IDEAL 61-745 and a FLUKE 8060A. Both were models from a previous generation that were used in the vehicle repair sector. Using the volt meter setting, three conventional electrical tests were performed. These are the outcomes:Battery Test with the Engine RunningIDEAL: 14.4 Volts........ 14.4 volts FLUKE.......... TACKLIFE: 14.42 VoltsBattery Test with Heater, Fan, Lights, and Engine OnThe ideal voltage is 14.3 volts.. . . . . . . . . . 14.3 volts FLUKE......... TACKLIFE: 14.34 VoltsTest the alternator while the engine is running for the ideal voltage of 14.5 volts. FLUKE: 14.5 Volts TACKLIFE: 14.53 Volts FLUKE: 14.5 VoltsThe measurements were exact to the tenth volt when compared to the results above. There was a significant difference on the hundredth volt. The IDEAL and FLUKE of the preceding generation were intentionally constrained. They were unable to measure that low, however the TACKLIFE could. Therefore, the cheapest model performed better and was more accurate than the higher priced competition.Critics can claim that comparing two different generational multi-meters to one another is like comparing "two oranges to an apple." Let me share a personal tale on this topic that my auto mechanic friend told me. He received an invitation to a FLUKE lecture at the Everett campus on the most recent multi-meters. He was early and observed technicians calibrating the new gadgets.He questioned, "What are you using to establish your new stuff?"They said, "The FLUKE 8060A."He left the room and went home by car.They need to have used the TACKLIFE rather than the FLUKE 8060A. It had better accuracy.
4.6/5
True RMS sensing meter provides accurate readings when measuring linear or non linear loads, regardless of waveform
Audible continuity sensor confirms that the circuit conducts electricity
Large, easy to read backlight display
Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit
Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
Slim, ergonomic design
Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohms
$234
It is exactly how it ought to be. Some reviews lament the lack of higher resistance readings, however this is nonsensical given that the meter's specifications are readily available and it only makes sense to read them before you buy the meter.This small multi-purpose meter is fantastic.- The amp clamp can accommodate a 600MCM.- Measures 400A and higher (AC only)Measures capacitance, temperature, voltage, amperage (AC only), continuity, and ohms. Comes with test leads (resistance)- An attractive LCD display backlightThe meter is smaller than the majority of Fluke clamp meters, but it is still well worth the cost. This is advantageous for me because I need a small, portable meter that I can keep in my desk drawer and use to troubleshoot panels, motors, etc.The LCD screen is crisp, simple to read, and nicely lit. The numerals can be seen clearly without looking at the screen directly, but as with any display (TV, computer, etc.), it becomes more difficult to read if you alter your viewing angle too much.It is simple to choose the correct measurement type since the selection wheel rotates smoothly and lightly clicks at each measurement's detent.The clamp features lines marked on the clamp face to demonstrate where the wire should be placed for the most accurate reading. The clamp is sturdy but simple to open.The test leads are quite flexible and somewhat long (around 3.5 to 4 ft). They fit the meter well and click into place firmly. The temperature probe is also securely fastened and does not wiggle or come loose while being used.The readings are precise and timely. precisely what you would anticipate.Overall, it was a fluke. I've tried Fluke, Ideal, Greenlee, and many other brands, and even though most of these are either good or "good enough," the Flukes I've used have been incredibly trustworthy, accurate, and durable, therefore dependable. To everyone, I would heartily suggest this meter.
4.5/5
Capture intermittent faults while performing other tasks using the logging capabilities of the Fluke 376 FC
Connect your meter to your smartphone with Fluke Connect Measurements
Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks
Create and share reports from the field via email, or converse in real time with ShareLive video calls
Record results directly to your phone and the Cloud
$234
After purchasing one of these a year ago, I came back to purchase two more so that I could combine them and use the Fluke Connect app to more effectively monitor three phase. As a service technician, I frequently utilise these metres. They withstand a tough production environment quite well. It's great to be able to measure DC current on one motor after sampling AC current on another. It's also great to be able to measure inrush current with ease. As with all of my Fluke metres, they are used frequently with the assurance that they will dependably deliver results. A very reliable item.
4.5/5
$234
To measure low amperage DC current, I purchased both the well regarded GTC CM100 GTC CM100 1 mA to 100 Amps AC/DC Low Current Clamp Meter and this UNI-T UT210E. I already have a fairly great Fluke 87V, but I hated having to set it in line every time I wanted to measure current accurately.So take a look at this video where I contrast the GTC CM100 ($150) with the UNI-T UT210E ($40)! I apologize; I just wanted to get this out quickly to help people. I didn't practice this.the following video: cFsBGUMSYmELike me, I believe you will be astonished. Not to mention, the UNI-T has many additional features that I didn't even cover.the following video: cFsBGUMSYmE
4.4/5
Sleep mode: automatically enters sleep mode after 15 minutes of inactivity for energy conservation
2-Year Warranty: 1-year buyer assurance (with a free option to extend it by 1 more year), and lifetime support from Etekcity
Accurately measures: AC/DC voltage, only for AC current (not for DC current), resistance, and also provides diode and continuity tests
Additional features: data hold, max reading, and an easy-to-read large LCD
Easily carrying: comes with a handy carrying pouch, perfect for use while you're on the go
Jaw opening: the Clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
$234
This initial "impression" evaluation includes some limited feature testing because I just got my UT201 yesterday. I've worked as an IBEW inside wireman (electrician) for about 13 years, primarily in the commercial and industrial sectors but also in some residential ones. Over the years, I've owned a number of voltage testers and multimeters. My primary tester and meter during the last six to seven years has been a Fluke T5-600.I bought the Etekcity UT201 because I needed a cheap True-RMS CLAMP meter for (rarely) metering wires that were too large to fit in the slot or jaws of my T5-600. The UT201 received overwhelmingly good ratings on Amazon, and the pricing was unbeatable given the feature set. For the vast majority of the time I would need to test larger wire, the 400A maximum is sufficient.In any case, the UT201 seems to have outstanding "heft" and quality for its pricing right out of the box. The markings and display are legible and simple to read. The two leads, which are cables with probes in black and red, are of a fair length. Although not as good as the Fluke or other more costly testers/meters I have used, the thickness and insulation on the leads appear to be pretty decent for the price. The meter may be used in situations up to its maximum rated voltage of 600V without making me uncomfortable. According to the reviews I read, the meters that other buyers had received did not come with a casing. Mine did, and the case is made of decent-quality plastic and is the right size.I compared the UT201's voltage and amperage readings to those of my Fluke T5-600. I measured the current (amps) draw of my quartz halogen light, hairdryer, and Shop-Vac (on high heat). Between the Fluke and the UT201, the amps measured were essentially identical. I refer to 0.1 amps plus or minus, which is minuscule. At numerous different 120V outlets scattered throughout my property, the voltage was checked. Once more, the readings were almost identical, within 0.2 volts. Continuity is the only other feature I've had a chance to "verify." Although the lead tips' contact did not seem as "sensitive" as other meters/testers I have used, just crossing them demonstrated continuity (as it should). Not sure, however it could be because of the leads' freshness or the type of metal utilized. If there was a choice, I might only take off half a star for this. Even yet, in the long run, it could not even become a problem.It was "complained" about by other reviewers that auto-ranging and auto-off weren't present. I don't anticipate auto-ranging at this pricing point. My device DOES have a built-in auto-shutdown option (after around 15 minutes of inactivity), and I think it actually beeped when it shut down (though I was in another room at the time). Instructions for use were provided. They were really simple to understand, and I think a new or inexperienced user could easily follow them. I couldn't find a UL listing on the gadget or in the directions.In conclusion, I have a really positive first impression of my new UT201. Since I only got it yesterday, I can't speak to its long-term accuracy or durability. Because of this, I will only give it a 4-star rating for the time being. I would unquestionably suggest the UT-201 to someone searching for a (very) reasonably priced, full-featured clamp-on multimeter based on what I've seen and the results of my short testing. I'll try to update this review if I have any materially bad experiences with the unit over the course of time and usage.
4.3/5
Non-Contact Voltage, 400A AC, Min/Max
Digital Clamp-on Meter with Test Leads, Pouch
Test lead storage
40MΩ Resistance/Continuity, Frequency/Duty Cycle, Diode Test
750VAC/1000VDC, 4000μF Capacitance, 2000 μA AC/DC
$234
As I've taken on increasingly challenging activities, I've steadily acquired more advanced multi-meters.I mostly purchased this model after seeing various HVAC YouTubers use and promote it, and I am grateful for that as it has shown to be well worth the cost and reliable.This is what I'm utilizing for both general electrical work and other HVAC duties.The only thing I regret is that the UEi model didn't come with a temperature feature, which would have been useful for the rare occasions when I would have needed it.Overall, this is a wonderful fit for the price if you require a sturdy meter with a lot of features, reliability, and accuracy.
4.2/5
PRODUCT DETAILS: Includes 61-744 Clamp Meter, carrying case, test leads, (2) 1.5V “AAA†batteries and operating instructions. Measure Rate: Samples 2 times per second, nominal. Weight: 7.1 oz (200g) including batteries.
IDEAL QUALITY: IDEAL Electrical is part of IDEAL INDUSTRIES, INC., a family-owned, professionally run company with a long history of building relationships, providing top customer service and setting industry standards in the process. We’ve been committed to craft and its craftsmen for more than 100 years. Whether you’re the electrical contractor or datacomm technician, production engineer or plant manager, we know the job the way you know the job.
AUTO SHUT OFF: Convenient low battery indicator and auto power off so that you can ensure your clamp meter is always charged and ready to use. To extend the life of your battery, the meter shuts of after approximately 10 minutes of non-use.
TAPERED JAW DESIGN: Non-Contact Voltage (70-600VAC) clamp meter with tapered jaws and hook tip. Features a compact jaw design for reaching into tight spaces.
AC/DC CAPABILITIES: Clamp Meter measures AC/DC voltage and resistance and measures 600 AAC current. Auto/manual ranging.
$234
I think I've found the cheapest voltmeter ever with this one. I maintain electronics at work using the high-end FLUKE variants. This was utilized in my electrical lesson. This CAT III gadget features add-on tips for the leads, which you will likely find very unpleasant and toss to the side after using them a few times.Integrated within this is a non-contact voltage detector. The clamp's tip is where it makes the detection. possesses a good continuity detector that can be used with diodes as long as they are not voltage-sensitive. amp clamp performs as expected. When I'm testing, I typically hang it. Think of it as a third hand. Little to say. It's a little, inexpensive multimeter that can easily fit in your bag. What is there to dislike?
4/5
AUTO SHUT OFF: Convenient low battery indicator and auto power off so that you can ensure your clamp meter is always charged and ready to use. To extend the life of your battery, the meter shuts off after approximately 10 minutes of non-use.
PRODUCT DETAILS: Includes 61-746 Clamp Meter, carrying case, test leads, (2) 1.5V “AAA†batteries and operating instructions. Measure Rate: Samples 2 times per second, nominal. Weight: 7.1 oz (200g) including batteries.
IDEAL QUALITY: IDEAL Electrical is part of IDEAL INDUSTRIES, INC., a family-owned, professionally run company with a long history of building relationships, providing top customer service and setting industry standards in the process. We’ve been committed to craft and its craftsmen for more than 100 years. Whether you’re the electrical contractor or datacomm technician, production engineer or plant manager, we know the job the way you know the job.
600 AMP AC CAPABILITIES: Measures up to 600A AC. Auto/manual ranging.
TAPERED JAW DESIGN: Non-Contact Voltage (70-600VAC) clamp meter with tapered jaws and hook tip. Features a compact jaw design for reaching into tight spaces.
$234
The meter was packaged quite well and arrived earlier than anticipated. Its readings seem to be quite accurate. Its lack of a lighting for low-light working settings frustrated me. decent meter for the money. For a while, I used an Ideal multimeter. I'm hoping this lasts at least as long.
4/5
✅ã€Bluetooth APP Clamp Ammeter】Display Current, Max, Min, Average measurement and timing with Analog and Curve Graph on the APP for AC DC ampere volt ohm, etc. Easy to auto connect with Android / IOS phone, allow you remotely control, monitor, continuous testing. Save files in TXT, Excel
✅ã€High Accuracy Amperage Meter】0.1A precise resolution for 0.1~400A AC DC Current, 1A for 400A~1000A. Means it test amperage high precisely for high and low AC DC Current. Ideal clamp meter for troubleshoot electrical mechanical HVAC problems for car diagnosis, boats, wires,etc.
✅ã€Rough Clamp on Ampmeters】It designed tough with edge cover to withstand jobsite drops and rough conditions. Rating IEC 61010-1, CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety standards non contact amp meter.
✅ã€Inductive Amp Meter with Temp Test】 Comes with extensible thermocouple probe support to measures high temperature from -20 to 1000℃, easy for you to test the auto radiator temp. Neat Bright Back Light LCD display, Big Jaw Caliber Size 1.77 inches (45mm)
✅ã€AC DC Digital Clamp Multimeter】 4000 Counts Auto/Manual Ranging optional on AC Current. Auto Range on DC Current, AC/DC Volt, Resistance, Capacitance, Frequency, Duty Cycle. Backlit Screen, Data Hold, Temperature, Diode Test, Relative Value, Continuity teat with Alarm buzzer.
$234
Your text will be rewritten by QuillBot. Start by typing or pasting something into this box, then hit the enter key.
You can use a clamp meter to measure both AC and DC amps. When measuring DC amps, you need to be careful to ensure that the jaws of the clamp are placed around the conductor in the correct orientation. If the jaws are placed around the conductor in the wrong orientation, the reading will be reversed.
To check the AC current with a clamp meter, you need to first ensure that the jaws of the clamp are properly positioned around the conductor. Once positioned, the display will show the current flowing through the conductor.
A clamp meter is a type of electrical tester that is used to measure voltage in a wire without having to make direct contact with the wire. To use a clamp meter, you first need to identify the wire that you want to test and then clamp the jaws of the meter around the wire. Once the jaws are clamped around the wire, the meter will display the voltage that is running through the wire.
A clamp meter is a type of electrical tester that is used to measure leakage current. It is also used to measure current in a circuit without having to open the circuit. To use a clamp meter, the jaws of the meter are placed around an electrical conductor, such as a wire. The meter will measure the current in the conductor and display the results on a digital display.
A clamp multimeter is a device that is used to measure electrical current. It is worth it because it is a very versatile tool that can be used to measure a variety of things.
A clamp meter is an electrical testing device that is used to measure the current in a wire without having to make direct contact with it. This is done by clamping the meter around the wire. Clamp meters are also able to measure voltage, resistance, and capacitance.
COPYRIGHT © 2019
