4.7/5
PRODUCT DIMENSIONS: Outer 11.1" L x 6" W 3.35" H - CLICK the orange button to order yours now!
SUPER CONVENIENT: This case is lightweight and compact with specifically designed mesh pocket for small Accessories
100% SAFE: Water Resistance, Shockproof & Dust-proof to protect your device safely and securely With easy grip handle
PERFECT FIT: Uniquely designed Hard Case to fit perfectly your Audio-Technica ATR2100-USB Cardioid Dynamic Microphone
CASE ONLY: For travel and storage (device and accessories are sold separately) Material: High-Quality EVA, Color: Black
$234
Despite the fact that it provides free returns, I chose to buy it even though I knew it wasn't designed to hold any of the items I had in mind. My Electro Voice N/D357A microphone had a very dated and damaged housing. Once I received it, I checked to make sure it fit well with my little tripod, microphone holder, and long microphone cord. It is quite nicely crafted and strong. Also a great price. I adore it.
4.5/5
Front and rear access unzips for easy setup in the field
Holds lavalieres, cables, and wireless mic with receiver mounted
Access for antenna to be extended while in bag
Removable and adjustable shoulder strap
Rugged Nylon Carry Bag Designed for Single Wireless System to be Used in the Bag
$234
The case was in nice condition when it came rather quickly. My two wireless receivers, their respective power sources, plus a few short XLR wires can all fit snugly inside the pocket.It has 8.5 mike holes "deep — long enough to accommodate an extended microphone. (SM58 Shure is 6.5 "long) The lack of finger holes to facilitate microphone extraction is my major gripe. If the microphone is not jammed firmly into the opening, it will stick out and the lid will be forced out, providing less protection. It can be challenging to remove if you cram it in deeply enough to completely encase the microphone. A slender microphone like an SM57 merely flops around in the hole as is customary.The zippers, seams, and stitching appear to be robust and well-made, as is typical with Gator items. Although it lacks subcompartments, the front pocket makes it easy to store extra cables and microphone clips.I am quite happy with the product overall. It provides decent defense in a handy package. It won't be able to handle wild gorilla treatment, but it should be able to handle some mild tame gorilla abuse. You must use a full hard shell case if you require more protection than what this case can provide.
4.4/5
Handles and shoulder strap
Padded bottom protects stand and bag
Separate compartments for desk and stand to prevent scratching
Brand: HERCULES
Contoured shoulder pad for comfortable carrying
$234
I'm definitely growing to love everything about Hercules! This works wonderfully for carrying my Hercules BS311B EZ Clutch Music Stand, which is why I ordered it. However, there is also room for a few cords, a lightweight guitar stand, and most likely more. The bag's minimalism appeals to me. That suits me just fine because it appears that durability was prioritized above adding a ton of decorative components. On the inside of the bag, there is a single straightforward divider that runs lengthwise, creating what amounts to two distinct compartments. However, the divider doesn't go all the way to the top of the bag. The shoulder strap is scalable. I anticipate keeping this bag for a very long time!
4.3/5
Hard shell exterior made of durable composite blow-mold plastic prevents your device from being crushed. Internal tri-Layer foam cushioning with diced foam customizable middle layer protects from impacts and drops.
Customizable Foam interior allows you to design seperate compartments for your Wireless Microphone System and Accessories. Remove the desired amount of foam blocks from the Diced Foam interior to fit the shape of your system and create needed compartments
CASE ONLY FITS SELECT SIZES OF MIC SYSTEMS Microphones , Lavaliers , UHF Headsets , Body Transmitters , Handheld mics , Lavaliers
Built-in Carrying Handle For Travel – MADE IN USA – Fits Audio Technica , Sennhesier , Shure , Nady , Archeer , FIFINE , Pyle , innopow , Elegiant , GTD Audio , Freeboss and more
Customizable Foam Interior allows compartments to be created within maximum internal dimensions of 14″ x 9.0″ x 4.0″. External Dimensions 16.0″ x 13.0″ x 6.0″. ACCESSORY DIMENSIONS COMBINED MUST BE NO LARGER THAN 14″ X 9″ X 4
$234
I recently got this case and couldn't wait to load it up with my gear. My wireless Line 6 microphone, receiver, wires, etc. fit in this case. Even my Shure 58 fit into this case with plenty to spare. It's a great idea to have the factory precut the internal foam section. This inside pre-cut area enables you to precisely tailor the fit of your gear. The storage capacity is increased by the case's approximately 6-inch depth. Although the Shure 58 didn't fit in the pre-cut area, I was able to use it by simply stacking it on top of other equipment. The storage capacity was taken care of by the case's depth. The sufficient amount of foam adequately protects the equipment. Would I bring this case on a flight? Most likely not... For airplane travel, I would probably want to get an anvil-style case. However, getting to and from performances and practice—this instance is just what you require.
4.3/5
CASEMATIX Recording Equipment Case has a thick plastic handle for easy carrying , double latch locking joints and a slot for accommodating a padlock for added theft prevention of your valuable Shure Foam Case
Fits Shure Microphones and Accessories with Maximum Dimensions: 15.5" x 11.0" x 4.0" ; The External Dimensions of the Case are 16.0" x 13.0" x 6.0" and can be the perfect fit for your Shure Dynamic Microphone and Equipment
STUDIOCASE is Designed to fit Shure SM58-LC , SM87A, SM57 , SM48 , SM58-X2U , SM58-50A , SM57X2U , PGA48 , PGA57 , PGA58 , PGA81 , PG48 , PG57 , PG81 , PG58 , BETA 87A , BETA 57A , BETA 58A , BETA 87C , KSM8 , KSM9 and More – MADE in the USA – INCLUDES CASE ONLY DESIGNED BY CASEMATIX AND HAS NO ASSOCIATION WITH SHURE
The CASEMATIX Shure Dynamic Microphone Case has a hard exterior made of durable composite blow-mold plastic , while the internal Tri-Layer foam cushioning with diced foam customizable layer for individual compartments can be made to fit up to Six Shure Microphones , or a multitude of Musical Recording Equipment of your choosing .
CASEMATIX Rugged Shure Case Protects against Impacts , Drops , Dust and Dings. Padded Dense Foam Interior is ideal for storing your Shure Condenser Microphone , Shure Cable and Accessories
$234
This product is reasonably robust and long-lasting. I appreciate how adaptable it is when it comes to setting it up for various items. However, it doesn't leave enough of those tiny foam rectangles for six microphones, as shown in the product image, to allow frequent removal and insertion of microphones. After a few weeks of use, the interior of my case has essentially reduced to nothing more than a sizable rectangular cutout with a few stray foam strips inserted between the microphones.Although I like the case, the central layer of foam may be done better. Perhaps give the unit a thick piece of foam and an Exacto knife?
4.2/5
DIMENSIONS: Outer 10.6" L x 7" W 5" H -- Inner 9.9" L x 6.1" W 4.4" H - CLICK the orange button to order yours now!
100% SAFE: Water Resistance, Shockproof & Dust-proof to protect your device safely and securely With easy grip handle
PERFECT FIT: Uniquely designed Hard Case to fit perfectly your Blue Yeti USB Microphone
CASE ONLY: For travel and storage (device and accessories are sold separately) Material: High-Quality EVA, Color: Black
SUPER CONVENIENT: This case is lightweight and compact with specifically designed mesh pocket for small Accessories
$234
Fits my Blue Yeti just like it should! The pop filter can be crammed in, however it is not easy. I took the Blue Yeti on a cross-country trip, and while I was careful with my bags while they were in my possession, some of the paint chipped off because I believe it was jostled around inside the box while it was on the plane or in another suitcase being handled by the airline. I agree with other reviews that I wish it had padding on both sides. But if you wanted more padding, you could always add some socks:) At the airport, they did inspect my bag and discovered something odd in it.
COPYRIGHT © 2019