Most bathtub drain threads are the same, but there are some exceptions. For example, older tubs may have a different thread size than newer tubs. If you're not sure what size thread you need, it's best to measure the existing thread or take the old drain with you to the store to ensure you get the correct size.
Most bathroom tub drains are universal, meaning they will fit any standard tub. However, there are some tubs that have unique drains that may not be compatible with all types of drains. If you are unsure about what type of drain your tub has, it is best to consult a professional before purchasing a new drain.
There are a variety of bathtub drains on the market, and they vary in size. The most common size is 1-1/2 inches, but there are also drains that are 2 inches or more. The size of the drain will depend on the size of the bathtub and the type of drain that is being used.
There are different types of bathtub drains, but the most common type is the pop-up drain. This type of drain has a lever on the side of the tub that controls a plug at the bottom of the drain. When the lever is in the up position, the plug is open and water can drain out. When the lever is in the down position, the plug is closed and water cannot drain out.
4.5/5
Rigorously tested to ensure quality performance
Made to original specifications
Designed exclusively for Delta faucets
$234
My tub's Pfister bath clean out lever was broken; it wouldn't stay locked in the open position, so I was always fumbling with it to get it to fully open AND close. With a full tub, the water would slowly drain, which I detested. The linkage was still functional when I removed it for inspection, but the lever was broken, and replacing it would have been somewhat pricey. Since I planned to replace the tub soon, I figured that a rubber plug and a plain overflow plate would suffice. Unfortunately, Pfister doesn't make a plain overflow plate. Since the bolt spacing on this Delta overflow plate was the same (2"), I decided to try it. Even though the Pfister plate has a nearly half-inch greater diameter, this plate still perfectly covers the tub's overflow drain. We will monitor its performance over time as it appears to be well-chromed and is equipped with respectable hardware. Due to the somewhat thin metal it was composed of, I deducted one star.
4.5/5
Includes rubber gasket for optional 2 inch no hub connection
This drain base is UPC approved
Works with luxe and most other 2" no hub linear drains
$234
This is what I bought to put in my bathroom. Anyone who is familiar with plumbing and the right manner to install a shower base should try this out. This height is suitable for setting the right slope and allowing a floor to be poured around it. The product's quality is another thing I like. It doesn't appear to be a poorly manufactured product.
4.5/5
2-hole trip lever faceplate fits most 2-hole waste elbows, Trip lever face plate for tub overflow
Spring style clip, 3-3/16†face plate with 2 holes, Fits Most standard trip levers
Includes 2 chrome finished screws to showcase a streamlined design
Heavy-duty Die-cast material construction ensures a reliable performance
Instructions included for an easier installation process, Finished in classic Polished Chrome, your installation won't sacrifice style for affordability.
$234
The exact identical overflow drain plate that was in my tub was being replaced by mine. The steel spring that maintains tension on the lever when draining the water caused the previous one to fail after 5 years, which is my sole issue. It might have lasted 25 years if it had been fashioned of superior materials. You therefore get what you pay for. However, replacements are fairly simple.
4.2/5
UNIVERSAL FIT: Designed to fit bath tub drain brands. Design to fit 1 3/8 inch or 1 1/2 inch waste. Ideal for repairing problematic plumbing fixtures without the need to replace them
FINISH: Nickel finish gives a rich and warm metallic look
EASY do-it-yourself Installation. Installation type: Above the Floor
DURABLE LIFT AND TURN STYLE: Durable brass construction provides strength and durability for lift and turn style drain kit
KIT INCLUDES: Includes drain, bushing, face plate & 2 screws. CONFIGURATION: Overflow or Non-Overflow.
$234
This plug rivals any name-brand plug in terms of quality while costing twice as much. At first impression, something appears to be solid, hefty, and well-made. This fixture's machining is superb, and it matches other branded fixtures I own from Delta, Moen, and Kohler in terms of finish (hodge podge - yep). I removed the brass adaptor and it worked, this is the fitting you need to suit the threaded drain that is 1-1/2" wide at the opening or bigger standard apertures.no installation instructions, so follow these recommendations:- Because the gasket creates a seal, plumber's putty is not required.- Don't remove the set screw; merely slightly loosen it with a flat-head screwdriver to allow the plug to pop off.I used needle-nose pliers and didn't need to over-tighten at all, just snug. - Once the drain is tight by hand, use the back (ideally insulated) handles of some pliers to insert into the body of the drain and tighten the rest of the way.- gently reinstall the plug, then tighten the set screw one more.
4.1/5
REPLACEMENT PART: Ideal for repairing problematic plumbing fixtures without the need to replace them
VERSATILE DESIGN: Chrome finish is highly reflective for a mirror-like look that works with any decorating style
BUILT TO LAST: Backed by Moen’s Limited Lifetime Warranty
STANDARD SIZE: Fits 1-1/2" threaded drain
LONGSTANDING FLEXIBILITY: Built on the Moen M-PACT common valve system, allowing you to update the faucet style in the future without replacing any plumbing
CONVERSION KIT: To convert from a 2-screw overflow, order part 142538
$234
This was a fantastic acquisition. Exceptional parts, a great fit, and an easy installation With this product bundle, I am genuinely pleased. I would strongly advise others to do this! Do yourself a favor and invest in a drain removal wrench; they cost approximately $10. If you don't already have one, it's worthwhile to purchase or borrow this wrench (from a friend, neighbor, etc.). The wrench makes removing the old drain simple, simple, simple! The wrench is available here on Amazon. You can purchase Superior Tool 06020 Tub Drain Wrench (Dumbell Wrench)-Dual Ended Drain Wrench at any hardware or home improvement store. It fits 3/8 or 1/2 Inch Ratchet Wrench.Furthermore, the product is accurate because it is for a 1 1/2 inch diameter (inside measurement) - hint, hint, the 1 1/2 inch diameter is for the inside of the drain fitting - and, yes, it fits properly. This is in response to the negative reviews based on the drain flange's diameter. The outer diameter is therefore 1 3/4 inches because that is what it should be. Mine was a fantastic fit. In order to confirm what size you have, it is a good idea to measure the interior of the drain flange or even take it with you to a store or to a plumber. Making assumptions or guesses only causes issues with the installation.Use plumber's putty to seal the drain flange piece, and inspect the gasket between the drain flange and the elbow plumbing after removing the old drain flange. I left mine in situ because it was in good condition.
4.1/5
CONVERSION KIT: To convert from a 2-screw overflow, order part 142538
WARM AND INVITING: Brushed Nickel finish provides a lightly brushed warm-grey metallic look
REPLACEMENT PART: Ideal for repairing problematic plumbing fixtures without the need to replace them
BUILT TO LAST: Backed by Moen’s Limited Lifetime Warranty
LONGSTANDING FLEXIBILITY: Built on the Moen M-PACT common valve system, allowing you to update the faucet style in the future without replacing any plumbing
STANDARD SIZE: Fits 1-1/2" threaded drain
$234
It was delivered on 6/27/15, and it was installed the same day. If you have the necessary tools, installation is simple. I had all the necessary tools, so I finished in 30 minutes, including cleanup. Tools required to remove an old drain include: I utilized vise-grips to grip the Superior Tool 06020 Tub Drain Wrench in order to remove the old drain. This is a need; otherwise, you'll run into all kinds of issues. To remove the old drain, turn counterclockwise while holding the removal tools in place. Since the new drain does not come with a rubber washer, you will also need plumber's putty. AVOID USING SILICONE! just plumber's putty Put a bead of plumber's putty all the way around the new drain's bottom. Using the aforementioned tools, tighten the new drain after manually screwing it into the hole. Before it dries, remove any extra plumber's putty that may be around the drain. Before turning on the tub's water, give the curing process a few hours. No rubber seal is included with the item, deducting a star.
4.1/5
Fabricated from Solid Brass for Reliability
1-Year Limited
2-13/16" Drain Diameter
Convenient Push Button Pop-Up Design
Corrosion-Resistant Finish
Designed for Long-Lasting Durability
Easy Installation
$234
I just got on here and ordered a new one after Kingston Brass customer service refused to assist me after I had only owned their bathtub and drain product for less than a year. This should have been covered by warranty after only owning it for a year through Kingston brass. Fortunately, this one looks to be holding up better than the prior one, but after experiencing their terrible customer service, I would never buy Kingston brass again. I immediately prefer this one to the one I originally acquired with the bathtub. I purchased this brand again to ensure that it matched my model, but regrettably, I think that since I previously owned it, I should have been insured for it (through Kingston brass). Thank goodness Amazon had a good price on it!
3.8/5
💛[Easy to Remove and Install] Put the drain hair catcher in the corresponding sink. While removing, just grab the clump out of the catcher and keep going.
💛[Durable to Use] Made of flexible Thermo-Plastic-Rubber, anti-slip, characterized by resilience and abrasive resistance. Extremely durable to use.
💛[Widely Used Scenarios] Suitable for bathroom, laundry, bathtub, kitchen and so on.
💛[Product Specification] With the size of 5.12†*5.12†*0.48â€.
💛[Multiple Colors for Choice] 5 colors, with Grey, Blue, Green, Pink and Brown. Coloring your life. 5 items, convenient to replace.
$234
Despite having medium-length hair and being in generally good health, I frequently struggle to remove hair from my sink and bathtub before it clogs the drain. Many people with extremely fine hair, so I looked at a number of the solutions available and chose them. The first time I used one of these, I placed it over the drain. When I finished my shower, I could see all the hairs stuck to the cover's borders. The one in the bathroom sink is a little more challenging since, because of the tighter curve there, it sort of pops up at the back of the sink just under the faucet, but thus far, it has stopped the majority of the hair, which is what I intended. These do a terrific job!
3.7/5
FINISH: Oil rubbed bronze finish gives a rich, dark brown, Old World finish with striking light and dark accents
KIT INCLUDES: Includes drain, bushing, face plate & 2 screws. CONFIGURATION: Overflow or Non-Overflow. EASY do-it-yourself Installation. Installation type: Above the Floor
EASY do-it-yourself Installation. Installation type: Above the Floor
UNIVERSAL FIT: Designed to fit bath tub drain brands. Design to fit 1 3/8 inch or 1 1/2 inch waste. Ideal for repairing problematic plumbing fixtures without the need to replace them
DURABLE LIFT AND TURN STYLE: Durable brass construction provides strength and durability for lift and turn style drain kit
$234
To complement other bathroom fixtures, I purchased this drain. Heavy duty and extremely well made. Good looking. Works good, although it is prone to hair clogs like many other drains of this style. To unclog, simply use a piece of wire with a tiny bend on the end. Still a fantastic item.
3.4/5
Foot Operated Bathtub Drain Stopper
3/8†or 5/16†Thread to Match the Drain Shoe
Includes Fitting Adapters
Durable Finish
Finish Brush Nickel
$234
Without using a hair cutter, I achieved the brass color. I didn't order the latter because I didn't know it was an option. I've had positive experiences. I had previously ordered a number of the terrible toe tap variety. They cracked and leaked, so I purchased this Lift and Turn since I needed a change. I believe it's fantastic. It was simple to install, seals well, and is trouble-free... with one exception. It clogs up because I can't figure out how to pull the plug out to get the hair ball out. I must remove the Drain Weasel, which functions like a little rotorooter, in order to access the hair. Please let me know if there is a method to remove it without damaging it! Otherwise, after using it every day for two months, I can suggest it!
Tub drains are usually glued in place with a special adhesive. This ensures a watertight seal and prevents leaks.
If your bathtub is starting to drain slowly, it may be time to replace the drain. While you can replace just the drain, it's usually best to also replace the overflow gasket and drain assembly. This will ensure a watertight seal and prevent any future leaks.
There are a few things to consider when choosing a bathtub drain. First, think about the size and shape of your tub. You'll need a drain that will fit the tub and allow water to flow freely. Second, consider the finish of the drain. You'll want a finish that coordinates with the rest of your bathroom fixtures. Lastly, think about your budget. There are a variety of drains on the market, so find one that fits your needs and your budget.
There are two types of bathtub drains: toe-tap and lever. Toe-tap drains are the most common and are operated by pushing a small lever on the drain with your toe. Lever drains are operated by a lever on the side of the tub.
Most tubs will have a drain located near one of the short ends. The drain should be at least 6 inches from the wall to allow for easy installation of the P-trap.
The average bathtub drain lasts between 7 and 10 years. However, with proper care and maintenance, your bathtub drain can last much longer. To prolong the life of your bathtub drain, be sure to clean it regularly with a mild soap and warm water.
COPYRIGHT © 2019