Bolt cutters and wire cutters are two different tools. Bolt cutters are designed to cut through thicker materials, such as bolts and chains, while wire cutters are designed to cut through thinner materials, such as wire.
If a wire was to cut a person in half, it would most likely happen at the waist. The wire would need to be very sharp and thin in order to cut through the person cleanly. If the wire was not sharp or thin enough, it would likely get stuck in the person and cause them a lot of pain.
Yes, wire cutters can cut through metal. The cutting blades on wire cutters are made of a hardened steel that is designed to cut through metal wire. When cutting through metal wire, it is important to use a pair of wire cutters that is designed for cutting metal. This will ensure that the cutting blades do not become damaged from the cutting process.
4.7/5
Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge (1.3mm) copper and soft wire
2.5mm heat-treated carbon steel construction provides durability and long life
21-degree
Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue
Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance
$234
Despite being marketed as soft wire cutters, I mostly purchased them for my PC tool bag as zip tie cutters. The zip ties can become sharp and spiky if the excess length is not properly removed from them using standard wire cutters after they have been fastened. These cutters perform the same operation by cutting flush to the zip tie's head, leaving a very smooth edge with no projecting vestige of the clipped tie.They both cut soft wire effectively. These cutters always make clean, simple cuts, and I've used them to make a lot of cat5e Ethernet connections. There are no loose ends left behind like with certain wire cutters.The handle is really cozy and offers a wonderful grip when being used. Additionally, because it's red, it's simpler to locate when looking through my tool bag.These are a wonderful buy for the price.
4.6/5
Strong-gripping serrated nose for easy bending, shaping, and pulling of wire
Cuts, strips and loops 10-18 AWG Solid and 12-20 AWG Stranded wire
Holes for looping and bending wire
Cleanly shears 6-32 and 8-32 screws
Precision ground stripping holes
$234
These wire strippers are appropriate for copper core and stranded 10 and 12 gauge wire. I'm so happy I finally invested in the appropriate tool. I've had trouble with diagonal cutters since they have a much harder time cutting through strong wire or romex than these do. For small wire gauges, I've used the amazing self-pulling strippers, and they work great, but not for large AC lines. I typically battle through with my sharp wire cutters. I have two sets of the subpar strippers from my father's collection, which feature a stop nut you can adjust to strip but not cut your wire.I'm glad I acquired these before rewiring my barn, installing EMT conduit, and installing a 100amp panel since I'm now wise enough to get the correct tool before I start a project. If not, I would still be working on the first circuit while cursing at how difficult it is to remove the insulation.
4.6/5
Cuts, strips and loops 20-30 AWG Solid and 22-32 AWG Stranded wire
Holes for looping and bending wire
Easy-to-read markings
Cleanly shears 6-32 and 8-32 screws
Coil spring provides fast self-opening action
Precision ground stripping holes
Strong-gripping serrated nose for easy bending, shaping, and pulling of wire
$234
All the wire sizes I required for branch circuit and house wiring operations are included in the 11054GLW. However, I also have an Irwin self-adjusting wire stripper with a mechanical help, so I usually use that one when it's more convenient and I don't need to worry about lugging about a big tool. The Irwin has just one significant flaw: it can't correctly strip conductors that are wrapped in thin plastic jackets, as the THHN/THWN in the picture, which are the exact conductors used in house wiring. This is where my other Klein strippers, the 1019 and 11053, as well as the Klein 11054GLW, come into action. Within their rated size, the Klein strippers had no issues at all with any type of insulated conductor. They will be swiftly and cleanly sliced by their razor-sharp blades, jacket and all. I would first score the Irwin with the Klein if I intended to utilize it on such conductors. The pivot on the 11054GLW moved easily and was simple to control, especially with the help of the spring. I adore all of my Klein strippers' handles. The ideal thickness is in between. The ideal amount of comfort and cushion. The 11054 in particular has a distinctive light that looks lovely at night. I won't be using it to shear bolts or screws because I already have other tools for that purpose, so I can't speak on how well it does that.The Klein 11054 will effortlessly cut its rated conductors, like any stripper of this sort. The operator must now work hard and practice to properly remove the insulator off the solid metal wire (or strands). But the device will function effectively.
4.6/5
Includes wire cutter for more versatility
Curved jaw with hardened teeth are designed to grip a variety of shapes from any angle
Constructed of high-grade heat-treated alloy steel for durability
Classic trigger release provides maximum locking force
Hex key adjusting screw tightens to adjust pressure and draw materials together for a controlled release
$234
In our new warehouse, where I'm setting up shop, I obviously needed to outfit it with tools. I chose this model because it matches the one I own at home and was acquired about 20 years ago.I am aware that many individuals detest products made in China. In the 1960s and early 1970s, everything created in Japan was despised by everyone.I placed my 20-year-old pair and this new pair side by side, and other than a few small wear spots, they are nearly identical in terms of appearance, weight, and feel. Following reasonable testing, the gripping force appears to be unchanged.I'm aware that there is prejudice towards products made in China, so I won't get into it all, other than to state that we Americans constantly expect to get more for less money. Which is top priority for you? I believe you truly get both in this instance.
4.5/5
2.High Hardness CR-V: Made of heat-treated chrome vanadium steel with angled head,rockwell hardness 60C.One of the strongest 5-inch flush cutter.
5.Ideal Shear Pliers for Electronics, Jewelry making, Zip ties, Plastic sprue cutters and more. Each customer will get our worry-free 12-month warranty and friendly customer service.
3.Compact design: Longer cutting jaws make flush cuts and fast cuts in tight spaces. The opening spring can help save force.
1.Ultra Sharp Wire Cutter: 13mm long upgraded jaw can achieve flush-cutting applications on up to 12 gauge (2.0mm) copper and soft wire.
4.Comfortable grip: Ergonomically designed non-slip rubber handle for comfortable operation.
$234
They work incredibly well, and I've now used them to make a model. These cutters effortlessly handled the fragile plastic in this European model kit and sliced through it without destroying it. The components effortlessly and cleanly detached from the sprues. On my example, the cutting blades are exactly aligned and the handles are spring-loaded. They are a tool for constructing models that is affordable, so I would enthusiastically suggest them to other modelers.I bought the cutters so I could use them to make plastic model kits. In order to extract components from the sprue trees with the least amount of damage, I required something other than a razor-sharp knife. I didn't want to spend a lot of money on them either (as you can see, with a quick search, others can be quite expensive). I had never seen these before and decided to take a chance when they "popped-up" as a suggestion for me. I am happy I did.
4.5/5
Klein Tools 11061 self-adjusting wire Stripper and cutter, 10-20awg
$234
These, in my opinion, are essential for Romex. These cutters can pull the cover off the normal 12/2 with ground Romex with one press and then pull the hot and neutral wires apart with a second squeeze. The Romex is ready for wiring after two brief squeezes that take roughly 5 total seconds. There is nothing faster in this pricing range, whether you are chopping 2 inches or 2 feet of Romex cover. In the manner described above, even 14/3 on the ground is possible. Of course, in order to insert the Romex from the top rather from the side, the adjustable cutter length stop must first be rotated or removed. Additionally, it makes it simpler to position cuts of different lengths. For both jaws to be able to grip onto enough of the insulated wire itself for the final wire stripping cut, the Romex cap must also be removed by at least 1 1/2 inches. The complete Romex 12/2 cable can be easily cut with the built-in cutters. A small bit of practice indicates the ideal method for each user.I've worked with wire gauges ranging from 8 to 20, so to speak, I've done it all. despite the fact that AWG 8 wasn't advised. But truly, the ease with which this stripper completes the task at hand genuinely impresses me. Strip a 20 ga., then immediately switch to a 10 ga., and the tool automatically makes the necessary adjustments for a quality strip. When it was new, mine was a touch harsh, but it worn out quite soon. In truth, I've only completed a few hundred strips and am still in the learning phase. If there are any issues with use, I'll update. Wish I had gotten one sooner because it's great not to have to line up the right slot every time. My eyesight isn't as sharp as it once was, especially at the age of 67. Now there is no longer a chance of cutting or scratching the wire. Because of the peeling apart function, the cut isn't quite as accurate, but I'm still satisfied.I further used the Irwin brand. The wire cutter itself is woefully inadequate, even though the Irwin seem to strip quite good. The Klein's over-lapping shearing motion produces more sharper, quicker cuts. The plastic stop on the Irwin looks a little tacky when it's attached to a high-quality tool. Just my personal preference, as the metal one on the Klein seems much more professional. Although the Irwin has crimping slots, I consider them to be more of a novelty since it is difficult to crimp in the middle of the grip. especially the larger included spark plug size varieties. Due to the fact that I have a specialist crimper, I would never use them.Although the Klein 11061 strippers are modern, they work hard and quickly.kd
4.4/5
Professional flush cutting snips:Apply to electrical work, jewelry making and daily use.suitable for shearing copper and soft wire up to 18 AWG (1 mm)
Sharp and strong: IGAN precision wire cutter has an 11mm long heat-treated carbon steel jaw with angled head design
Compact design with open spring:it is ideally sized for working in small spaces and help you to save force.
Environmentally friendly and comfortable grip: Made of TPE mateial,it has non-toxic and tasteless properties，and provides a rubber-like texture .
Suitable for cutting small wire,vape wire ,tie wrap,beading wire,zip ties,plastic and more. To ensure the durability of the cutters, do not use it to cut hard or big gauges wires.
$234
Excellent craftsmanship can be seen in this IGSN-170. And these pliers actually perform the desired cutting. I was unable to fit between objects before, but now I can thanks to my tiny nose. Additionally, you only need to place the pliers' nose over the wire you wish to cut, and then you may do so with little effort. No need to insert the wire all the way into the pliers' jaws; just get it as close as you can. in order to be chosen. It was enjoyable to review previous projects I had completed and snip all the protruding wire ends that I could never reach. Cutting is more difficult to execute because of the good grips and the precise pivot point with no slippage.
4.2/5
Premium Standard : High carbon, heat-treated and polished jaws for excellent crimp and durability
Package Includes : One wire roper swager and one wire cable cutter. Cutting up to 5/32†steel cables, single stand wires like fencing wires
Features : Multi-cavity of 3 grooves works from 1/16†to 1/8â€
Swaging Sleeves : Swage copper, aluminum oval sleeves and stop loops to wire rope
Note : Do not use on coated wire rope without first removing the coating from the assembly area
$234
The tool can be challenging to close on the bigger ferrules, as was previously described. I decided to remove the plastic handles there (a few gentle taps with a hammer and they slide easily off) and replace them with a few pieces of steel tubing that were about a foot long to provide more leverage. This was quite helpful in creating antenna guy wires at odd angles. Use the original handles while working on smaller items and pull those pipes. If you're planning to work with 1/8" material a lot, I'd recommend their 24" tool. Even when the jaws appear to be same, you still gain more leverage without making any adjustments.The instructions for configuring the numerical dials on the handle were ambiguous, which is the only issue thus far. These are factory-set to "1" and can be adjusted to change the force on the jaws, which is typically fine. If you're not pleased with the results, increase the number on one side and try again until you are. Results can vary depending on the materials you're dealing with.The connection is really well made by the tool. I use the longer ferrules, so for a polished appearance and greatest grip, I crimp the middle first, followed by either end.
4.1/5
100% satisfaction -- we are confident that BOENFU Wire cutter is your best choice. If you are unhappy with the product, please feel free to Contact us. We will do our best to provide the best service for you.
Safer & non-slip scrub instead of PVC -- the handles of most wire Cutters are PVC. However, the design of our wire cutter is scrub. It is non-slip and comfortable for usage, which has the function of anti-electronic shock. It is safer during operation.
material type: Iron
Cut all kinds of wires up to 1. 8mm -- the wire cutter is made of super quality solid and durable steel. It is great tool which is easy to cut all kinds of wires including cables, memory wires, headpins, eye pins, small chain, Tiger tail, cords, beading and so on.
Harder than other wire Cutters -- the edge is specially Hardened. It easier to cut most hard things.
Modern & scientific workmanship -- the production of wire cutter is adopted modern material chrome molybdenum alloy steel + CR-V. The scientific design of the ergonomic coating handle provides comfortable grip to protect your arm, it can save time and reduce fatigue while working.
$234
I once again relied on the recommendations of previous customers to make this purchase, and I'm glad to report that they were correct!I frequently work with 3D printer filament because I operate two 3D printers as a hobby. I have to regularly clip a bit of filament for a few reasons that I won't go into here to avoid going off on tangents.I got a set of Stanley pliers, and while I had to aggressively file the diagonal cutters' jaws to make them useful, I use those for cutting electronic wire.I purchased a second set of pliers from Harbor Freight Tools, and they were of decent quality. The cutting edges were seriously misaligned, making them essentially useless as cutters. However, to my surprising amazement, I found they are incredibly effective at clearing melted filament from my printer's nozzles. I decided not to return them to the retailer. But I needed some SHARP cutters to cut my 3D printer filaments precisely without crushing them.Once more, I purchased these based on reviews, and they are perfect for my needs! The sharpness of these pliers is shocking. In the few weeks I've had them, I've used them often and I've always been impressed.Although I haven't used these to cut any tougher materials (such as small bolts or screws), I concur with other reviewers that doing so would soon wear out these pliers. These pliers' jaws are literally sharpened like scissors' blades, shearing material more like scissors than crushing-shearing it the way diagonal cutting pliers often do.These might not be the best choice for you if you require a good set of diagonal cutting pliers to cut tough materials. However, these are worth looking into if you require particularly sharp pliers to cut softer materials.
3.6/5
This cable cutter can make very precise, very clean cuts without fraying or smashing the ends. it not only cut the cutaway cables and ripcords perfectly also great for grommet removal.
Recommended for installing 1/8" Muzata cable railing projects. The pair of the cable railing kit please search B01L73UNKK, Require assorted 1/8" stainless steel railling cable please search B01N0N4IME
This cable cutter is designed for cutting steel wire which up to 5/32â€, If you want to cut the steel cable seals, single strand wire, like the fencing wire, any bolt cutter should do. after 200 cuts off the 1/8'' 7x7 assemble coated steel security cable it still very sharp and clean cut
If you can fit soft or hard steel cable wire rope in the jaws of these cutters, it will be cut. Made quick and neat work .
Worked easily cutting the cable. Didn't even need both hands to cut up to 3/16 galvanized and coated cable for those wondering.
$234
Yes, you are correct. I bought the cable cutter and the hydraulic crimping tool.I also bought a set of 50 stainless steel turnbuckles and 500 feet of 1/8" - 1x17 stainless steel wire rope, so allow me to state that. Therefore, my project was made up of 44 rope strands that were secured at 88 ends.Cut all 44 strands effectively with a cable cutter. The blades appeared to be slightly dulled after the first few cuts, but not enough to hinder the operation. The short handles made it so that once the last cut was accomplished, I frequently felt discomfort in a finger or knuckle from exerting so much pressure with both of my hands.Hydraulic crimping tool: I wondered whether I would need to add hydraulic oil after a few crimps, but no hydraulic oil was provided, and I wasn't sure if I could use some air tool oil that I had on hand, so I didn't open the plug or check the oil level.I discovered that the device is powered by a rubber bladder after reading some of the reviews here. I concluded that the bladder restricts the maximum pressure and that even if I continued to pump each crimp up to 45 cranks of the short handle, it probably wasn't necessary because I had read in the product material that there is a pressure release once the crimp is complete.I managed to crimp 88 fittings, and just 2 failed, only 2 of which could be salvaged.Overall, I think it is a terrific tool and a great deal for the price of $100. My job is finished, my wrists and hands are stronger now, and they are somewhat sore, but that's fine.
Wire cutters are designed to cut through thin pieces of metal. The thicker the wire, the more difficult it is to cut. Wire cutters can typically cut through wires that are up to 3/8 of an inch thick.
If you need to cut wire and don't have a wire cutter available, there are a few other tools that can do the job. A pair of heavy duty scissors can usually cut through thin wire, and a sharp knife can be used to score and then snap thicker wire. A saw can also be used to cut through wire, but it's important to use a fine-toothed blade to avoid damaging the wire. If you have access to power tools, a rotary tool with a cutting wheel can quickly and easily cut through wire.
A pair of wire cutters is a handheld tool used to cut pieces of wire. It consists of two blades, one on each side of the handle, that come together when the handles are squeezed. The cutting edges of the blades are beveled so that they can grip the wire and cut through it. Wire cutters are most commonly used to cut electrical wire and cable. They can also be used to cut other types of wire, such as steel wire or copper wire. Wire cutters can be used to cut through thick wire, but it may take some effort to do
The best tool to cut wire is a wire cutter. Wire cutters are designed to cut through wire quickly and easily. They have sharp blades that make clean cuts through wire. Wire cutters are available in a variety of sizes, so you can choose the right size for the job you’re doing.
The easiest way to cut copper wire is to use a sharp knife or a pair of scissors. You can also use a wire cutter, but it is not as easy to control.
A wire cutter is a tool used for cutting wire. There are many different types of wire cutters, each designed for cutting a specific type of wire. The most common type of wire cutter is the pliers-type wire cutter, which is designed for cutting thin wire.
COPYRIGHT © 2019
