Best Wheel & Tire Mud Flaps & Splash Guards in 2022

Last update: January 18, 2023

Are plastic or rubber mud flaps better?

There is no clear consensus on which type of mud flap is better, as each has its own advantages and disadvantages. Plastic mud flaps are generally cheaper than rubber ones, but they may not provide as much protection against rocks and other debris. Rubber mud flaps are more durable and offer better protection, but they can be more expensive. Ultimately, the best type of mud flap for your vehicle depends on your budget and your driving needs.

Are splash guards easy to install?

Splash guards are designed to protect your car from mud, road debris, and water. They are easy to install and usually come with all the necessary hardware. Some splash guards may require minor drilling, but most can be installed without any tools.

Are splash guards on cars worth it?

Splash guards, also known as mud flaps, are installed behind a car's tires. Their purpose is to prevent mud, water, snow, and other debris from being thrown up into the air and onto the vehicle body and windows. While splash guards are not required by law, many carmakers include them as standard equipment on new vehicles. Some states have laws that require mud flaps on certain types of vehicles, such as trucks and buses. There are several reasons why splash guards are worth having on a car. First, they can help protect the vehicle's paint

Are wheel well splash guards necessary?

Most car owners don't think twice about adding wheel well splash guards to their vehicles. They're usually made of plastic or rubber and designed to protect your car's paint job from getting chipped or scratched by debris kicked up from the tires. While they may not be the most stylish accessory, they can be a lifesaver if you live in an area with a lot of gravel roads or construction sites.


TOPlight Tesla Model 3 Mud Flaps Splash Guards 4Pcs Set Full Protection Mud Flaps for Tesla Model 3 Accessories Review:


The roads can become rather hazardous to your car during less than ideal seasons of the year. Road salt might begin to eat away at your paint over the winter. Puddles everywhere might cause rocks to be tossed around when it rains. Unfortunately, the Model 3's design enables for dirt and debris to be kicked up onto the rockers by the tires. People who live in non-dry climates (anywhere but the area around the Tesla facility) have been experiencing a lot of rock chips.You want to safeguard it if you were one of the people who paid more for the more expensive paint colors, particularly red ($2500). These are an excellent strategy to reduce the quantity of rocks that the car pushes in the direction of the paint at the rockers. Although it won't stop every rock from hitting your car, it will stop the most of them.The installation process is simple. Screw it in as directed per the instructions. This is not for you if you are not handy. To correctly install all 4 onto your vehicle and make sure they are fastened, it will take around an hour. Once everything is in position, speed quickly to launch the car. This will ensure that everything is securely fastened. If anything creaks or rattles, check each and every area you tinkered with to make sure you tightened everything down and that it is placed correctly.There isn't much more to say but that. They offer defense. For those who are worried about the potential range reduction caused by this, driving more efficiently will result in battery savings greater than the potential loss. I would say that they would, at most, reduce range by 1-2%, but I am not a specialist in design efficiency.



Rally Armor MF12-BAS-RD Basic Black, Red Mud Flap with Logo (Universal Fitment (no Hardware)) Review:


For a 2009 Mazdaspeed 3, this was purchased. Since it is ubiquitous, any car can use it. I was aware that this doesn't have any hardware or holes. The mud flaps are exactly as pictured. This is unquestionably preferable than the expensive version for a particular car. Simply use a cardboard template to create new holes or match the existing ones in the fender well. Before using larger bits to make the hole larger, drill smaller holes. You should keep checking the hole with the clips to make sure it isn't too big so that the clip won't be as secure. To mount these mud flaps, I bought fender clips. I'll include a link to the product below.Nissan Ford Maza 6 PartsSquare 25x Bumper Fender Clips Nylon Retainer Plastic Rivet 8mm



A-premium Mud Flaps Splash Guards for Toyota Tacoma 2016-2019 Molded (Except SR Models) with OEM Fender Flares Front and Rear 4-PC Set Review:


Installation instructions would undoubtedly save you five minutes of figuring out what goes where, but it's quite obvious by observing how the holes in the mud guards line up with the bolts on the current fender flares. To get between the tire and the fender wall, you can use a 10mm wrench or, preferable, a 10mm short socket, but once you figure it out, removing and replacing each current fastener just takes a few seconds. (I don't understand the remarks about fasteners that don't fit and needing to go to an auto parts store because the existing bolts are holding the fender flare on, thus extra fasteners are not needed. I wonder what is now holding your fender flare on if you don't already have the right fasteners. Additionally, a short handle phillips head screwdriver is required to insert one of the supplied screws into each mud guard's farthest hole. This could be perplexing because I saw that some reviewers complained about the "square plugs" being destroyed when they were removed? The supplied screw fits exactly into the square hole in the plastic plug, so there is no need to remove it. All of the holes in the mud guard correspond perfectly with the factory holes for the current fasteners, so if something doesn't fit, you're just doing it wrong. After installation, mud guards look fantastic and seem to have been there all along. :-)



oEdRo Upgraded Front Rear Mud Flaps Compatible with 2016-2019 Toyota Tacoma with OEM Fender Flares Only, Full Set 4pc Splash Mud Guards Review:


Very nicely manufactured, however there are just a few flaws, which mainly relate to the "paint guard" film rather than the mudguards themselves.Before attaching the mudguards, you should apply the paint guard film that is included in the box to the vehicle. The paint film installation instructions are included on a sheet, but you may also get them on YouTube. I just assumed the installation would be the same because I found one for Weathertech with a comparable paint film. I didn't even use the paint film at all because it was supposed to be precut but wasn't and it seemed to be made of extremely inferior materials. I considered asking a nearby business how much a tiny amount of paint protection would cost, but finally I just decided that since I would have to install them anyhow, there was no use in bothering with paint film. I don't think Toyota-branded mudguards also come with paint film after looking at them. Compared to the Toyota brand, these are about half as expensive. Good mudguards all around. I'll let you know if anything changes.



Tesla Model 3 Mud Flaps Splash Guards(Set of Four) Review:


The model 3 mud guards arrived on schedule. To know which mud guard went on which tire well, all four were clearly labeled. Additional fender liner clips and screws to completely secure the mud guards into their original screw places were provided in the packing in case the ones you already have break while being removed.Some people may prefer to remove the wheel, providing them with complete access, as the work space required to install the mud guards can be quite small.Since my model 3's mudguards are often hidden from view, their installation made them slightly more visible because my paint is lighter than usual. Although Tesla does not offer it, I wish the colors matched. This tweak will blend in better with models 3s with darker colors.I've only put 3000 miles on my Model 3 so far, but I've already started to see road debris in these spots before the mud protection was installed. I can only assume that after several thousand more miles this will eventually cause damage to the paint in these areas.Therefore, installing these mud guards is practically necessary. I strongly advise obtaining them or at the very least setting up some ppf in those locations.



Highland 1007100 Black Heavy Duty Rubber Splash Guard - 2 Piece Review:


Outstanding heavy-duty splash guard. These are what I mounted on a class A RV. I bought two sets of four flaps and stacked two (2) of these on a "L"-shaped thick piece of aluminum to achieve the 24" width I required to cover the rear dulleys. They barely flutter at all while hanging because they are so hefty. From Pep Boys, I bought a set of chromed strips with the words "Heavy Duty" cut off. To tie them together and add some brightness and flair, I will attach them close to the bottom of the pair of flaps (on either side of the RV). From the side and back of the RV, they are a deep black color and look fantastic.



Highland 1058000 Black Splash Guard - 2 Piece Review:


However, I had noticed that the bottom of the camper had been really wet on one trip where it had rained, so I installed these on our travel trailer/camper that didn't have mud flaps. The mud flaps performed a fantastic job of blocking the road spray, but the floor is merely OSB, which is particularly prone to dampness. These do a good job of holding on, but I am worried that the rubber around the screw holes might rip. But up to now, so wonderful!



Husky Liners 79061 Wheel Well Guards Rear Wheel Well Guards Fits 2019 Chevrolet Silverado 1500-New Body Review:


For the 2019 Silverado, it is a fantastic product at a wonderful price.



RoadSport 4322 'C' Series Universal Fit Premiere Splash Guard (Plain Black; 18" Height x 10-3/8" Wide) Review:


These allowed me to create some extremely effective mud flaps. It only took a half-hour. Second set moved more quickly. They were delivered accurately and on time. The other Ranger's kit was really reordered. It's unfortunate that Rangers never actually manufactures them. I looked everywhere, even Polaris. The sets they sell don't prevent the mud from being thrown up from the bottom of the tire, even if they appear excellent and fit well.


Can I drive with my splash guard hanging?

If your splash guard is hanging, it's best to take it to a mechanic to get it repaired. Depending on the severity, it may just need to be reattached or replaced. However, if it's severely damaged, it could cause problems with your car's alignment or cause your tires to wear unevenly.

Do mud flaps go on the front?

Mud flaps are designed to protect a vehicle's body and paint from the splattering of mud, water, snow, and debris kicked up by the tires. They are usually made of rubber or a similar flexible material and are attached to the vehicle's fenders. In some cases, mud flaps may also be attached to the underside of the vehicle.

Do mud flaps help in rain?

Mud flaps help in rain by keeping your vehicle clean and preventing mud and dirt from being splashed up onto your paintwork. They also help to keep you and your passengers clean and dry by stopping rainwater from being splashed up into the cabin.

Do mud flaps prevent rock chips?

Mud flaps are designed to help protect your vehicle from rocks and other debris that may be kicked up while driving. They work by providing a barrier between the road and your vehicle, and can help to prevent paint damage and other damage that can be caused by rocks and other debris. While mud flaps may not completely prevent all rock chips, they can help to reduce the amount of damage that may occur.

Do splash guards affect gas mileage?

Most car experts will tell you that splash guards have no effect on gas mileage. They are usually made of a lightweight plastic material and are designed to prevent mud and debris from being thrown up onto the side of the vehicle. While they may help keep your car clean, they won't help it go any farther on a gallon of gas.

Do splash guards help prevent rust?

Splash guards, also called mud flaps, are installed behind a vehicle's wheels to help prevent mud and other debris from being flung up and onto the body of the vehicle, where it can cause rust. Splash guards are made of durable materials, such as rubber or plastic, and can be purchased at most auto parts stores. While they will not prevent all rust, splash guards can help to keep your vehicle clean and free of mud and debris, which can help to prevent rust.