4.6/5
Store and access your Glasses and Shades neatly and safely
Easy to use while On the Go- No Buttons or Moving parts Just slide in and out
Fits All Glasses and Sunglasses
Clips onto Sunvisor or Into Car Vent
Securely Holds 2 Pairs of Glasses in Place- Glasses will Not Slip Out
$234
You now have a convenient location to store your glasses all the time, so you won't have to waste time looking for them in the glove box, arm rest box, cup holder, on the dashboard, underneath the parking lever, on the passenger seat, etc.The holder's arms are used to support the spectacles. If the bridge is long enough, it can accommodate armless glasses, but you must be cautious when entering them to avoid scratching the lenses (especially in a hurry).It is very simple to put on and take off glasses. It is very secure once inside. Glasses are probably not going to fall off if you hit a speed bump or accidently knock it (except at a precise angle and force). Simply slide your glasses in and out; there are no levers, buttons, or other controls to operate.It can hold the majority of glasses. Unless you have one positioned too high on the bottom and one placed too low on top so they contact each other, even two enormous aviator glasses will fit. You won't have a problem if you make it a habit to slide it in the middle each time or if you deliberately slide it in.airvent supporter In my opinion, you should remain with the visor design unless you install it in an airvent that can be closed off to prevent airflow from damaging your glasses over time from exposure to excessive heat, cold, and temperature changes.As a nearsighted individual who must wear corrective lenses when driving, I personally use this. I don't like wearing semi-tinted glasses, so depending on the weather, it's handy to have both regular prescription lenses and prescription sunglasses on hand.Overall, a double sunglasses holder is quite practical and makes a good organizational tool
4.5/5
car tissue box holder,Much easier and safer than putting your tissue box case on the car seat, save a lot space for your car, make your car look more neat and tidy.
PU leather car napkin holder, can be fixed in the Car sun visor, car backseat and the door of the car.
Car sun visor tissue box, Simple design and easy to install, the clip on the back can hold the visor or car backseat tightly.
Putting the car visor tissue box on the car , fashionable and pretty nice, convenient for you to reach the paper tower, safe driving without distraction.
Each sun visor tissue holder comes with a pack of refills paper towels(up to 22cm x 10.5cm x 2cm).
$234
I chose black since it looks great in my home and performs exactly as promised. is absolutely out of the way and sits well on the door. The tissues that are included are the one thing I don't like about it. I definitely won't be purchasing the refills for it because it has a rough feeling. I'll put some more effective tissues inside! The tissue box sliding all over the car and being able to slide beneath the seats so I could never get to them is still the ideal answer.
4.4/5
✓ Buy It Now With Confidence, This Best ★ TOP QUALITY SUN VISOR GLASSES HOLDER ★ Will Keep Your Car Organized 100% and We Guarantee Satisfaction.
✓ ★ A MUST HAVE ★ This CAR SUN VISOR GLASSES HOLDER Is Great To Protect Your Glasses From Scratching Or Breaking In Your Car, So You Can Have An Enjoyable Ride And Give Your Glasses Longer Life. It is specially designed to hold your glasses firmly in place and at your fingertips.
✓ Our Sunglasses Case installs easy, just clip the case over your sun visor, it attaches with a double snap clip design so it’s strong enough to hold up and not move. The clip is flat and a little bit wide so it will not leave any marks on your sun visor. Great design not to block your view from driving.
✓ Our Sun Glasses Holder is perfectly designed to fit all cars, suv, and trucks visors, It’s measuring 7†x 2.7" x 1.7†Inches, Fits all glasses and sunglasses even thicker ones, It’s designed to open and close easily with one hand single push without having to look up when driving, and it closes really safe so no worries about the glasses falling down while driving.
✓ Our Car Sun Visor Eyeglasses Organizer Box is made of the highest quality ABS materials, It also includes on the inside a velvet feel material to keep your glasses safe from scratches for years to come. It has 2 small slots for credit cards, gas cards, or any tickets or receipts.
$234
If you're anything like me, you need the security that blind spot mirrors provide, and you know how many options there are on Amazon.For a couple reasons, I gambled on these. They are genuinely made of glass, so there is no need to worry about a covering flaking off like with other products. Second, there are a lot of adaptable mounting possibilities. And lastly, it fits most mirrors flawlessly!I mounted the mirror to my mirror's glass without utilizing the swivel mount, as other people have done. I didn't see the necessity for it to be able to be adjusted because it looks much better when it's placed directly.Use the provided alcohol wipe to give it a good cleaning before installing it (this is crucial!!!). the mirror's glass surface. After cleaning the area, if necessary, use a blow dryer to aid in drying it. For this to work, your car's mirror must be spotless and dry. I positioned my car's mirror all the way in and down to make it easier to apply by allowing me to support it with my fingers squeezed under the mirror glass as I pushed the blind spot mirror on. This was quite beneficial. The longer you can hold the button pushed for, the better.Approximately 1,000 miles have been driven with the mirror on, and it has been through five to six car washes, from touch-free to tunnel car washes with brushes. It always holds perfectly well!
4.4/5
Easy to rotation: Visor sunglass holder can rotate 180-degree which allows you adjust the glasses vertically or horizontally.
Double-Ends Car Sunglass Clip:Glasses holder for car visor can perfectly holds 2 pairs of sunglasses and an extra card. Keeps your glasses away from dropping, scratching and missing.
Universal Sunglass Holder for Car: Sunglass clip for visor fits all glasses and sunglasses, especially thicker ones.
Perfect Design Car Glasses Holder:This sunglass visor clip has internal soft sponge does no harm to arms of glasses & sunglasses. Sunglass car clip is flat and a little bit wide, No marks left for sun visor.
Safe Sunglass Holder for Driving:Securely attaches to the sun visor, do not obstruct driver's view.
$234
No issues with heavy visors, first. Even though they are plastic, these clips attach to my visors more securely than other metal clips did. They grip the folding earpieces of the glasses tightly enough to keep them in place without rattling. Not locking, they are spring-loaded. I was specifically searching for a holder that could accommodate my wire-hooked clip-on sunglasses. These work on the non-tag-holding end, but only when the nosepiece is placed last and facing up, which requires two hands. Although it works, doing this naturally requires some practice. The clip, or rather the clip-on glasses in them, do conflict with my visor bag, however a 45-degree swivel fixes that. No issues wearing glasses that hang from their earpieces. Final verdict: better than what I had before for my clip-ons and fine, even great, for standard glasses due to their durability.
4.3/5
Refills for Tempo auto visor tissue holder.
3-ply tissue by Halsa.
3 bags containing 9 individually packaged refills: for a total of 9 refills.
Fits the Tempo car visor tissue holder (sold separately).
$234
They fit perfectly into my tissue visor, and my local Dollar Store used to sell them all the time. One box contains 3 visor packs, and I can get about a month's worth of use out of one pack, though it really depends on how much you use it. I would estimate that there are 50–75 individual issues in each pack (just guesstimating). Simple tissues that are useful when you need them but aren't particularly soft and have a thin, fibrous texture. I've used them for everything from cleaning up soda to dusting my dash and a runny nose.
4.1/5
COMPATIBILITY: Fits all glasses and sunglasses, especially thicker ones.
NO HARM TO GLASSES AND SUN VISOR: Soft material does no harm to arms of glasses & sunglasses. The clip is flat and a little bit wide, No marks left for sun visor.
FUNCTION: This Sun Visor Glasses Holders enable to clip 2 pairs of sunglasses and an extra card. Keep your glasses away from dropping, scratching, missing, make it safer.
NO EFFECT TO VIEW: Securely attaches to the sun visor, do not obstruct driver's view.
FLEXIBLE: It can rotate 180-degree which allows you adjust the glasses vertically or horizontally.
$234
Only the clam-style sunglass holder with the bottom that opens up and the bows of the sunglasses sandwiched between was recognizable to me. The hinge on those is easily broken, and that's my issue with them. One was defective soon after purchasing. I thus desired a more durable solution. These sunglass holders from FineGood are top-notch. They feature a fairly streamlined shape and are of the highest quality and design. I thought the accent color was a great addition, and I adored getting two holders—one for my car and the other for when I ride in my husband's. The only aspect of this sunglass holder's design that required some getting accustomed to was how to insert the bows of the sunglasses into the spring-loaded clamp. This FineGood design features a considerable degree of spring resistance, which makes it more challenging to fit the sunglasses into the holder, in contrast to the old clam design where the bottom section of the clamp simply hung down and offered no resistance. As a result, using this design may require two hands for certain people because you need to pull down the lower section of the clamp to insert the sunglasses into the holder. The key, according to what I've learned, is to fold the sunglasses' bows in, stick your finger through the gap between the bows and the lenses, move your hand toward the holder with the sunglasses in it, and then use your index finger to pull the lower portion of the clamp down while advancing the sunglasses. Release the lower portion of the clamp once the bows are inside to lock the sunglasses in the holder. The spring-loaded clamp makes it feasible to use the holder with one hand, and I have discovered that this is the simplest method for inserting the glasses into the holder. However, because the products are of such great quality, I don't believe I will need to repurchase them. I would absolutely suggest this product.
4.1/5
Fits Old & New I-Pass, EZ-Pass (not HOV switch models), PalPass, QuickPass,FasTrak & others in pics
Compact design, easily tucked behind mirror, and will not block driving sight
Single Industrial grade suction cup for extreme hot & cold condition. Easy to Install & Remove
Unbreakable. Will never melt, break, deform, discolor, or rattle
Lifetime warranty. Made in USA
$234
I used this EZpass holder mount to attach it to my motorbike handlebars after doing much research to find a solution for my motorcycle (don't think the one suction cup will remain on a motorcycle's curved windshield for too long without flying off with the shaking, bumps, and wind turbulence). So far, mounting it on the right side of the handlebars with the suction cup removed and the steel clip portion fastened into the handlebar bracket of the earlier EZpass holder mount I had on the bike of the older style EZpass seems to be the perfect option. Despite riding so far, it is really stable. By the way, I also tested it in my car for a day, and the strong suction cup kept it there the entire time!It looks fantastic on the bike, seems to be quite durable, and since it's not made of plastic, it won't ever fracture from use, abuse, the heat of the summer sun, etc. For the new model EZpass in my automobile, I will now get another one! It clings to the windshield with just a push and detaches instantly with a gentle flick of the side tab of the suction cup. Perhaps a touch too easily, but in my initial test, it managed to stay on the windshield all day without coming off. With three "very thin, weak, floppy, flat" little suction cups that wouldn't even remain in the holder, let alone stay on the windshield, I already lost $7 when I bought one of those plastic EZpass holder mounts from a car wash place. No matter what I did—alcohol the area around the windshield, dry the suction cups, wet them, etc.—those holder suction cups would not stick to the windshield for even a little period of time. I was lost $7 because I misplaced the receipt.
4/5
USED FOR DRIVER AND PASSENGER: Our sun visor extender blocks sun glares coming through windshield or side window for driver and passenger while driving.
DURABLE: Made from PU&PC material, same plastic used in car makers interior components along with quality elastic straps. which is shockproof, compact structure and premium quality thick, very strong, safe and durable to last for a long time.
SUN GLARE PROTECTION: Our sun visor extender can block excess glare and harmful UV rays. eliminates eye fatigue and allow the user to see the road clearly even in an intense sunlight, help avoid accidents while driving on sunny days.
EASY TO INSTALL AND STORE: our sun sunshade extender doesn't require any tools to install. it can also be kept easily in the storage when not in use.
UNIVERSAL:Our sunshade extender is easily fitted to your car, fully adjustable to universally fit all visors whose width is greater than 4.7 inch
$234
I received the single Sun Visor Sunshade Extender that I had ordered from Amazon yesterday afternoon. The "built in" visor on my 2005 Toyota Sienna does not reach down deep enough to shield the harsh sunshine in the mornings, which makes it difficult for me to commute to work in the mornings in the late Spring and into the Summer. Although I haven't had a chance to use it while driving yet, I'm confident that after a few days of using it when operating my minivan's driver side, I'll be overjoyed to have this new Sun Visor Sunshade Extender attached to my natural visor. Any of my friends or coworkers that are seeking for a product like this for themselves would receive my highest recommendation!
4/5
â—†Double-ended Clipâ–²***This glasses holder for car sun visor enable two pairs of glasses and an extra card to be clipped tightly on account of that it has double-ended clip.
â—†One Year Guaranteeâ–²***You are our valued customer,we'd love to provide you a replacement when the item got a quality problem.You always can contact us if you are experiencing any trouble with our glasses clip for car.
â—†Compatibilityâ–²***The car visor clip is compatible with various types of glasses.
â—†Built-in Sponge Protectionâ–²***The visor glasses clip comes with built-in sponge,which can protect your spectacle frame from all kind of damage.
◆180°Rotation▲***The sunglass holder for car can rotate 180° so that allows glasses to be vertical or horizontal,which is convenient to use.
$234
I was sick of my car-stored sunglasses being scratched. This is the ideal remedy for it. The padding that prevents the arms from being scuffed up is also something I like. The plastic appears a little flimsy, but because this won't be transported in and out of the car, it shouldn't be a problem, and the price is unbeatable.
3.9/5
100% MONEY-BACK GUARANTEE - Our holders are backed by 100% guarantee that you are fully satisfied with your product or receive your money back
ALL NEW 2017 2nd GENERATION HOLDER - our new 2nd generation holders are now stronger than before! The flexible base allows you to easily remove the holder from the windshield without breaking it. Plus, they are 100% UV Protective!
4pcs Reclosable Fastener INCLUDED ($8.00 Value)
FITS ALL NEW MAJOR TOLL PASS HOLDERS - Including: New York, New Jersey, Massachusetts, Maine, Vermont, Pennsylvania, Delaware, Illinois, Maryland, South Carolina, Indiana and Virginia
ATTACH IN JUST SECONDS - with suction cups which even come with RELEASE TABS so it is super easy to remove.
$234
In the end, three were purchased for the three cars/transponders.Rarely pass through tolls, so purchased to store in glove compartment until necessary and then temporarily attach while driving.won't be subjected to prolonged sun exposure.Strongly advise: To prevent flexing/breaking of the clear plastic base plate, push on tops of the cups during installation rather than the transponder.Pull on the tabs of each cup while removing to release the suction; pulling on the transponder or base plate will probably damage the transparent plastic base plate.
COPYRIGHT © 2019