Best Toilet Bowls in 2022

Last update: November 26, 2022

Are toilet bowls standard size?

There is no standard size for toilet bowls. Different toilet bowl manufacturers make bowls of different sizes. The size of the bowl may also vary depending on the style of the toilet (e.g. close coupled, back to wall etc). Toilet bowls can range in size from around 36cm to 42cm in diameter. The height of the bowl may also vary, with some bowls being taller than others. If you are unsure of the size of toilet bowl you need, it is best to consult with a plumber or bathroom retailer.

How do I choose a toilet bowl?

Toilet bowls come in many different shapes and sizes. When choosing a toilet bowl, it is important to consider the size of the bathroom, the style of the bathroom, and the budget. The size of the bathroom will dictate the size of the toilet bowl. If the bathroom is small, then a smaller toilet bowl would be more appropriate. If the bathroom is large, then a larger toilet bowl would be more appropriate. The style of the bathroom will dictate the style of the toilet bowl. If the bathroom is traditional, then a traditional toilet bowl would be more appropriate.

How do I tell what kind of toilet I have?

There are a few ways to tell what kind of toilet you have. One way is to look at the flush handle. If the handle is on the left side, it is likely a left-handed flush toilet. If the handle is on the right side, it is likely a right-handed flush toilet. Another way to tell is by the location of the tank. If the tank is on the left side, it is likely a left-handed flush toilet. If the tank is on the right side, it is likely a right-handed flush toilet.

How do you know what size toilet to buy?

There are a few things to consider when purchasing a toilet such as: -The size of the bathroom -The type of bathroom layout -The style of the toilet The size of the bathroom is the most important factor to consider when purchasing a toilet. If the bathroom is small, then a compact toilet would be the best option. If the bathroom is medium to large sized, then there are a variety of toilet sizes to choose from. The type of bathroom layout is also important to consider. If the bathroom has a lot of space, then a standard sized toilet would be

American Standard 047158-0070A Tank to Bowl Coupling Kit Review:

Purchasing a kit made by the same manufacturer as the item is always a good option. I made the error of visiting our neighborhood hardware store and purchasing a universal kit (simply the tank-to-bowl bolt set), but I was unable to halt the leak.I purchased this American Standard kit, and the first thing I noticed was that the washers are flexible rubber while the universal kit has hard rubber washers for some strange reason. Indeed, this stopped the leak, and I'm now a content flusher! Oh, and another minor plus: These bolts were shorter, which was also what was required. Because the bolts in the universal kit were so absurdly lengthy, the job took even longer.

American Standard Champion Kit 241 F/Close Coupled Champion 2Pc Review:

The tank must be screwed on very tightly to the base for the Champion Series. In order to prevent the tank from rocking, this lowers it onto the raised rib in the front and the raised nipple in the back on the base. Additionally, it compresses the rubber stem washers that are located under the bolts and the huge gasket that is used to seal the water passages between the tank and bowl. Once the bolts are tight, they will compress to around half their original thickness, so there is no point in attempting to reuse them.Make sure the tank is positioned as evenly and level as possible before tightening the bolts, and check that the bolts, which are still loose, are lined up straight and not at an angle, which would suggest that the tank isn't sitting in the ideal position.How much tension do you apply? Too much will cause you to break the base, the tank, or both. Use a tiny ratchet and extension socket. Any other action will likely result in the tank or foundation being cracked or chipped. Use the socket and extension but not the ratchet as you finger tighten the nugs. Then, while switching back and forth between the bolts, tighten each one a little at a time to maintain an even pressure. To check if the tank has yet to hit the nubs at the back when it is almost there, move the tank forward slowly and put a piece of paper over the nub. Continue until the paper can no longer pass through, at which point STOP! Never touch that bolt again unless you intend to take it out and replace it with a brand-new kit.This will take more torque than you might think and more than what the majority of toilets need.

TOTO CT418F#01 Aquia Wall-Hung Dual-Flush Toilet Bowl, Cotton White Review:

When remodeling our powder room, I am very glad I decided to use this toilet.Since our contractor had never installed one of these before, I was initially really anxious to have it put. To save yourself some time, make sure that whoever installs this toilet strictly adheres to the installation instructions. After the initial installations, we had to replace a few items because the contractor did not follow the instructions in the manual.The instruction manual is clear and available in English, Spanish, and French. There are many tutorials online in addition to the handbook.- Please be informed that a tank system will be needed to hold the toilet's frame, which will necessitate retrofitting the studs beneath the drywall. (We also bought the Toto in-wall system.)- You'll also need to fix the plumbing, which necessitates replacing your floor.Please don't forget to measure the height of the toilet seat, which is universally recommended for these toilets. 19 is ours "on the ground. (The initial was much too low.)- Keep in mind to take the floor height into account if it changes from the original.- Make sure the hole in the drywall is precisely the same size as the pipe and access plate and not larger. We must make repairs because the rough in our contractor completed does not completely cover the area.- As mentioned above, you'll need to buy an in-wall toilet tank system in addition to a flush plate for the wall and a toilet seat. This endeavor is not inexpensive when the costs are totaled.Overall, I am extremely delighted with this toilet because it not only saves me around 9 "It takes up less room because the tank is concealed behind the wall, but cleaning the toilet and the area surrounding it is simpler. I am pleased with how well this job came out.I'll shortly share a snapshot!

Toto Eco Drake 1.28 GPF Two-Piece Toilet CST743E#01 Cotton Review:

Toto toilets are the best. I know it sounds strange, but even while I adore my plumber, I don't enjoy their frequent visits. I gradually replaced every toilet in my life with a Toto model. Why? At the end of every single flush, there is that pleasant glug, glug, glug sound. You see, Toto is knowledgeable about fluid dynamics and has incorporated these ideas into their design. As a result, electricity is produced by the speed of the water generated in the bowl, and this power is maintained throughout the flush's waste disposal phase. Any flaw in the surface's smoothness, or finish, could cause turbulence, which would interrupt the flow during the removal stage. Since Toto is aware of this, they glaze their toilets from the wax ring on the floor all the way down to the porcelain contact. This is something that no other toilet maker does. perfection achieved through meticulousness.

KOHLER K-6299-0 Veil Wall-Hung Elongated Toilet Bowl, White Review:

The toilets in America are standing toilets. I can't help but be pessimistic since I believe it is to assist the overweight people. They also have a huge, unsightly water tank that takes up a lot of space. Since there is no tank, correctly fitted wall mounted toilets may support more than 500 pounds and give users at least 8 inches more legroom. Additionally, you may sweep the floor beneath them, making them much easier to clean.Since this machine has fewer curves than any other American versions, cleaning is significantly easier.I am aware that there is concern regarding potential issues with the tank because it is in the wall. People believe that the wall must be open in the event of an emergency. Inside maintenance is performed on Kohler tanks. You can reach in after removing the flush plate. I am aware of this because I had them put in my homes rather of having to service them. The tank fits into a hollow in the wall. All the gadgets are put in and covered by the flush plate after installation and after the wall has been finished. In the early 1990s, I put Kohler tanks in my home in Hungary. Since then, I've never had to open one.

Saniflo Sanibest Pro: Macerating Upflush Toilet Kit (with Elongated Bowl) Review:

It works fine and has been installed for a week. EVEN THOUGH IT IS QUITE LOUD, LOUDER THAN MY SUMP PUMP, I KNOW IT IS WORKING. In case of a power outage, I placed an audible GFCI and also purchased a high water alarm. Both are not particularly loud, but I can still hear it if I'm in the basement. To prevent the lights in the bathroom from turning on if the power goes off (due to a tripped breaker, etc.), I installed the GFCI as the first outlet with the line in. Due to the thick gasket, the water tank does not fit well on the bowl; therefore, press down to conduct a dry test first. Purchase a thinner gasket or, as I did, shim it using plastic shims. With shims, the gasket is rock solid, but when it is flushed, it rocks. Since the pump under the tank causes it to sit about 4 inches from the wall, I also added a toilet water tank bracing on the back. It would break if someone were to lean back against it. If I experience any problems with it, I'll update. To receive the additional year of warranty, register the product.

How do you measure a toilet bowl?

To measure a toilet bowl, you will need to measure the width, depth, and height of the bowl. The width is the measurement from the back of the bowl to the front. The depth is the measurement from the top of the bowl to the bottom. The height is the measurement from the floor to the top of the bowl.

How much should I spend on a toilet?

There is no definitive answer to this question as it depends on a number of factors, such as the size and layout of your bathroom, your personal preferences and budget. However, as a general guide, you can expect to spend anywhere from $100 to $1,000 on a toilet. If you are looking for a high-end model, you may even spend up to $5,000.

Is one piece or two piece toilets better?

There is a lot of debate over which type of toilet is better, one piece or two piece. A one piece toilet is a toilet that is all one unit, meaning the tank and bowl are all one piece. A two piece toilet is a toilet that has a separate tank and bowl. There are pros and cons to each type of toilet. Some people say that one piece toilets are better because they are less likely to leak. The fact that there is only one seam makes it less likely for water to escape and cause problems. One piece toilets are also easier to clean because

What are the different types of toilet bowls?

Toilet bowls come in a variety of shapes and sizes. The most common type is the round bowl, which is typically used in residential homes. Other types of toilet bowls include the elongated bowl, which is longer and narrower than the round bowl, and the square bowl, which is square-shaped.

What are the four types of toilets?

There are four types of toilets: flush toilets, dry toilets, composting toilets, and urinals. Flush toilets are the most common type of toilet. They use water to flush waste down a drainpipe. Dry toilets do not use water. They may use a chemical or a fan to remove waste. Composting toilets use bacteria to break down waste. They may be used in areas where water is scarce. Urinals are toilets for men. They do not have a seat and are usually used in public places.

What are the parts of the toilet?

The toilet is one of the most important fixtures in your home. It is used daily and is an essential part of your plumbing system. The toilet consists of four main parts: the bowl, the tank, the flush valve, and the fill valve. The bowl is the part of the toilet where you do your business. It is made of porcelain and is connected to the tank with a flush valve. The tank is where the water is stored that is used to flush the toilet. It is made of ceramic or porcelain and is connected to the bowl with a fill valve.