Yes, you can use your phone as a sound meter. There are a few different apps that you can download that will allow you to do this.
There are a few factors you may want to consider when choosing a sound level meter. The first is what type of measurements you need to make. Will you be measuring sound in a workplace, or in an outdoor environment? If you need to measure sound in a workplace, you may want to choose a sound level meter that is specifically designed for that purpose. Another factor to consider is the range of sound levels that you need to measure. Some sound level meters can only measure a limited range of sound levels, while others have a much wider range. Choose a sound level meter that
There are a few things you'll want to consider when choosing a sound meter. First, think about what type of measurements you'll need to take. Will you be measuring sound levels in dB(A), dBA, or dBC? Do you need to measure sound pressure levels (SPL) or sound intensity levels? Do you need a meter that can measure peak levels? Next, consider the range of sound levels you'll be measuring. Some sound meters have a limited range, while others can measure a wide range of sound levels. Make sure to choose a meter that can
There are a few ways to measure sound. The most common way is with a sound level meter, which uses a microphone to pick up sound waves and converts them into electrical signals. These signals are then displayed on a screen in units called decibels (dB). Sound level meters can be used to measure both loudness and intensity. Another way to measure sound is with a spectrum analyzer. This tool breaks down sound waves into their different frequencies and displays them on a graph. This can be helpful for identifying specific sounds or for analyzing how different sounds mix together.
4.5/5
$234
I initially had trouble figuring out how to use this (I suppose that's why there are instructions, huh?) I bought this device primarily because I have a lot of tools in my shop and a huge snowblower outside in the winter. My wife keeps warning me that they'll damage my hearing, but I didn't believe her, so we ordered this to see how it worked. It functions well but takes some getting used to. I was quite perplexed about how batteries were inserted, but I later realized the orange section is merely a cover. It's AMAZING that an electrical item can be purchased nowadays that includes batteries. I've included images to demonstrate how it disassembles. Personally, I think this is inexpensive and practical if you work in a shop to see how loud and dangerous equipment can be, or like my kids, just for fun to yell into.
4.4/5
$234
I like to think of myself as a reasonably discerning audiophile, so I wanted to gauge how well-balanced my home AV system was. To complete this task, I purchased the VLIKE Noise Sound Level Meter. I couldn't be happier. The device is incredibly easy to operate and significantly improved my sound system. Today's systems typically include a microphone and an Audessy program to perform this task automatically, but I prefer to be aware of the settings. The meter has two A and C filtering settings. You should calibrate your speakers for real sound pressure using setting C. A is relevant to and weighted for a human's hearing. I sincerely hope you find one as beneficial as I did if you buy one.
4.4/5
FEATURES - Automatic backlit display for easy visibility in dark situations. MAX/MIN hold feature for measuring absolute high/low peaks. +/- 1.5dBA with 0.1dBA resolution & measuring range of 30-130dBA. Automatic power off feature to save battery life (easily disablable). Sampling rate of 2x/Second. Up to 30 hours of continuous use on a single 9V battery.
EASY - Super easy and simple to use. All readings are measured in dBA, the most common decibel reading for most all applications, home and commercial. Simply turn on and get a reading! Large easy to read backlit display with a MAX/MIN function to know the MAX and MIN dB levels recorded by the meter.
AFFORDABLE - Our sound meters are designed with the general consumer in mind, made with the features required by most users while eliminating uneccessary features that only add to the cost that will not normally be used by most consumers. This way you will only be paying for what you really need in a sound meter, a decibel reading.
VERSATILE - A great basic sound meter for use across the spectrum in many different fields from music recording, neighbor noise complaints, industrial settings, office settings, speech therapy & more.
WARRANTY - 1 Year no hassle manufacutrer warranty against all manufacturing defects with friendly and responsive USA based support staff who will be happy to help with any and all questions or concerns!
$234
I have both the smaller basic meter (BAFX3370 dBA alone) and the bigger advanced meter (BAFX3608 dBA/dBC).PROS 1: Provides you with accurate information on how noisy your neighbors actually are and whether you should leave before the noise damages your hearing.2) Has a display that is beautifully and easily legible, as well as a light sensor for use in low-light or dark environments.3) For the ADVANCED BAFX3608 dBA/dBC meter, the software is called "Sound Level Meter" and is produced by "Sound Lab" for Windows only. It is a nice, straightforward tool that is readily understood or used, and it also appears to be bundled without bloated software and/or software features.4) The gadget is automatically powered through the USB port when connected to the ADVANCED BAFX3608 dBA/dBC meter through USB ports.5) For the ADVANCED BAFX3608 dBA/dBC meter: If you'd like the neighbors next door to see you're having problems with their noise, you can stand at your window or outside your door holding this enormous meter! (Does someone also sell flags indicating someone is planning to file a civil case, I wonder?)6) The ADVANCED BAFX3608 dBA/dBC meter operates much better than the dBA capable devices and observes the lower-frequency noise spectrum produced by small 4-cycle engines to a great extent.CONS1) Become familiar with the peak level button; otherwise, you can discover that you're not receiving the outcomes you wanted.2) The power-saving auto-off feature cannot be adjusted. (For example, the gadget automatically turns off if you plan to leave it unattended for longer than a few minutes.)3) The unit does not allow users to set the initial on state of the readings for the ADVANCED BAFX3608 dBA/dBC meter. For instance, when first turned on, the equipment defaults to dBA and fast reading. In order to average in anomalies rather than quickly seeing a distracting spiked sound anomaly, I prefer to always take readings using dBC and slow, especially dBC because it tends to detect the lower frequency range better than dBA. Unless you're trying to monitor for very brief bursts of sound, like gunshots, slower readings are likely more desirable when recording. In that case, faster measurements are needed to capture the brief bursts of sound.4) Despite already having Windows Only software that is fully described, the ADVANCED BAFX3608 dBA/dBC meter should be able to output using libUSB (and probably already does so) simple streams of data that can be readily piped into a text file for graphing by other open-source tools. (To further investigate the protocol, whether serial or libUSB, I'll need to utilize WireShark. The USB Vendor Device ID for "SM" is 64bd:74e3.)5) The hardware handbook for the ADVANCED BAFX3608 dBA/dBC meter claims that when connected via USB, it is possible to sync the time with the computer, but no such option appears to exist.6) A pamphlet included with the ADVANCED BAFX3608 dBA/dBC meter provides a URL for downloading a copy of the software (example: SLVersion2.exe), but this is actually an outdated copy of the software with a date of 2015.10.07, and the most recent version (as of this writing) is already packaged inside the device's box using a small mini CDROM. (SoundLabSetup20160720.exe, or the version number on the small CDROM, is dated 2016.07.20.)It would be great to have a USB function for computer logging, or memory for logging, and easy transfer to a computer for hard copy (independent of operating system). (The bigger Advanced BAFX Decibel Meter now includes this capability.)NOTES: The software on the ADVANCED BAFX3608 dBA/dBC meter registers the device under Windows' Device Manager as both a HID-COMPLIANT DEVICE and USB INPUT DEVICE. It also features a USB SILICON LABS C8051F320 8051 8-bit Microcontroller hub chip. The USB product vendor and model USB ids for the device are 64bd:74e3 "SM." The device has a probable closed-source firmware that has commands to start retrieving recorded records, instruct the device to start delivering live data, and commands to get and send the current time, along with perhaps some rudimentary addressing with arguments. This is laborious work compared to having the specs or already written code, however if I had more time, I would supply some C code to carry out these functions. The firmware specifications (such as a PDF) for interacting with the hardware via ASM/C programming code should be made available by the hardware manufacturer. (For instance, Uniden publishes firmware specifications for their hardware components, however these can be challenging to locate.)Attaching a photo of a larger, more modern BAFX sound decibel meter next to a smaller, seemingly older BAFX sound decibel meter.
4.3/5
FEATURES - Automatic backlit display for easy visibility in dark situations. MAX/MIN hold feature for measuring absolute high/low peaks. +/- 1.5dBA with 0.1dBA resolution & measuring range of 30-130dBA. Automatic power off feature to save battery life (easily disablable). Sampling rate of 2x/Second. Up to 30 hours of continuous use on a single 9V battery.
EASY - Super easy and simple to use. All readings are measured in dBA, the most common decibel reading for most all applications, home and commercial. Simply turn on and get a reading! Large easy to read backlit display with a MAX/MIN function to know the MAX and MIN dB levels recorded by the meter.
AFFORDABLE - Our sound meters are designed with the general consumer in mind, made with the features required by most users while eliminating uneccessary features that only add to the cost that will not normally be used by most consumers. This way you will only be paying for what you really need in a sound meter, a decibel reading.
VERSATILE - A great basic sound meter for use across the spectrum in many different fields from music recording, neighbor noise complaints, industrial settings, office settings, speech therapy & more.
WARRANTY - 1 Year no hassle manufacutrer warranty against all manufacturing defects with friendly and responsive USA based support staff who will be happy to help with any and all questions or concerns!
$234
I should note that my job is to test and write about computer hardware before I get into how the PT02 functioned. The testing includes measuring the amount of noise. I've used a few different entry-level meters in the past, and they were all of incredibly low quality and had wildly varied results. I was therefore looking for an IEC651 (later called IEC 60651) class 2 rated meter when looking for a new one. Although this is the lowest rating, the majority of inexpensive meters have no rating at all, and type 2 meters, let alone type 1 or type 0 meters, are incredibly expensive and beyond of my price range. I came across the PT02, and although there were no reviews at the time, I decided to give it a shot because of the Type 2 rating.I was quite delighted with the entire construction even before I used it. The other inexpensive meters are all composed of thin polymers and have a cheap appearance and feel. The PT02 feels quite robust and has some weight to it. Additionally, it includes a rubberized finish for protection and grip. The buttons are clear and simple to use, and the lighted display looks nice. Since I now lack a means of verifying the IEC651 rating, I can only claim that the PT02 has shown consistent results while outperforming my previous meters.I have been considering more Protmex items because I was so pleased with my purchase.It should be noted that a few meters with a similar design are sold under various labels; this is not much different from the inexpensive meters I first purchased. But compared to all of those other meters, the product is far superior. Without investing three or four times as much, I don't think I could get a better meter. Even though I NEVER make an effort to write up a review outside of my job, I was content enough to spend the time writing this.
4.2/5
â–²9V BATTERY INCLUDED & WARRANTY DESCRIPTION - 9V Power Supply feeds the system; Two-Year warranty against manufacturing defects. If you have any problem about TACKLIFE, please do not hesitate to contact us at support@tacklife.net, Tacklife Technical Support team will solve your problems immediately in time.
â–²MIN/MAX/HOLD FUNCTION - Max recorded reading and min recorded reading at any given time frame; Hold function could freeze the current measurement reading. Provide you an instant sound reading when you check in any environments, such as factories, workshops, schools, residential, offices, road, audio and etc.
â–²FAST/SLOW MODE & ACCURATE MEASUREMENT - Fast/Slow mode changed allows you to get a reading per 0.125sec/per 1sec. Measures Range: 30dBA-130dBA at frequencies 31.5Hz - 8KHz; Accuracy: +/-1.5dB; Resolution: 0.1dBA
▲FLASHLIGHT & LCD BACKLIT DISPLAY - Press and hold the button “HOLD†for 2-3 seconds can turn on the backlit display and flashlight at the same time. The backlit display helps you read at the dark environment. Additional flashlight can be used in conditions of darkness or poor visibility.
▲AUTOMATIC POWER OFF & "COU" MODE - Automatic shutdown after approx 10 minutes of inactivity to reduce energy wasting; Press power button and fast/slow button at the same time before you start the tester and it will indicate “COU†to cancel automatic power off function at your will.
$234
I frequently have to assess or utilize gadgets with specific dB ratings because I work in the computer sector.The sound meter will be helpful for me in determining rated spec and in quelling an irrational curiosity with unrelated types of data. You'll find me using this tool a lot going forward to assist shoppers in learning more about items like computer fans that have sound ratings.THE GOOD: - The gadget has a fresh 9V battery and is functional right out of the box.- Sturdy, high-quality housing- The device has a tripod mount compatible standard-sized screw attachment on the back.30 dB to 130 dB range - The LCD is simple to see, especially with the light on - The backlight may be helpfulTHE BAD: On my device, turning on the LCD light also turns on the backlight.- The LCD light would not turn on without the backlight being turned on.Conclusion: A user's environment, like that of any other tool, determines the need. For me, testing other gadgets and sharing information were my objectives. A sound meter can be used for a variety of purposes, including developing something that needs precise sound specifications or possibly filming and needing to know the sound level on set.Finding inexpensive goods that work well is the objective, making this one a winner.Visit DAEDALUS FROST TECH on Facebook and Instagram for a more thorough evaluation.Gratitude for reading!
4.2/5
CE Certified & RoHS Compliant, Auto Range and A/C weighting
32000 Reading Internal Memory (Data record function)
PC Interface :Compatible with Windows 10, 8, 7, Vista and XP
Can read between 30dB~130dB, and capture data to a PC
$234
I required a method for "recording over time" some sounds and noises.I looked for a sound meter that records decibels (dB) against time stamps, or REAL DATA.For $44 I FOUND it. THE UNIVERSE. an SLM-25.Stop reading if SLM-25 has overwhelmed or bored you too much.If—no pun intended—you are technically sound, continue reading.Okay, I purchased the device because it includes "recording" while other units only provide "max dB," which is acceptable but DATA is preferable.Data is provided by THIS UNIT along with time, graphics, and OMG how 44 bucks can be SO COOL.Product: Includes the unit, a sponge top for the wind, an XLNT zip carrying case, a USB cable, instructions, a 2-bare wire with a plug "wire", a warranty, and the smallest compact disk you've ever seen. It's so small—about 2 inches—that you might just throw it away, but don't—just it's a CD DVR; they just saved on plastic and shipping width.Installation: Insert the "small" CD into your CD/DVR reader; the hole will fit; however, because you've only ever seen CDs the size of a bagel, you might be concerned that it won't work. Overcome this misconception.If Setup doesn't appear, find it and click Installation.Install...Toggle the desktop icon.Follow the directions, etc. Plug the device into a USB port, then link the communication.Unit is ON while USB is connected, OFF when it is not, but it may be turned ON when it is not.Screen will display readouts in "real time" when connected.Set parameters, then try 20 readings every 5 seconds, which gives you about 40 readings in a minute.NOTE: Even if the parameters remain the same, you must "set parameters" each time you record.When recording, the device will say "rec"; when all of the recordings have been made, the device will say "FULL."You can select as few as 20 records at one-second intervals and as many records as you want for as long as you want.To download the recording that was made, click Download.The awful thing will display a "text" listing of your data together with a line graph of your recording's performance at a professional level.You have the option to export to Text or Excel.Due to my outdated Excel software, outdated laptop, and Windows Vista, utilizing Excel was challenging but doable. To compare "sound" conditions tests, I regularly layered data recordings into one Excel spreadsheet. Concluding the first straightforward test...one test.Low E and High E guitar strings, with frequencies of 82 Hz and 330 Hz, can be muffled by walls by 20–40 dB.Minor drawback: YOU NEED A LAPTOP THERE WHEN YOU RECORD, i.e., if you push record and disconnect the USB, your recording will stop. Therefore, you must bring the device AND a laptop to the location where you wish to record sound.Another $41 sound analyzer "Reviewer" said that he could "disconnect" once the "recording start" had begun, but I'm dubious about that because laptops have batteries and are made to be portable.This product performed AS WELL as it did, if not better.I now own a "sound analyzer/recorder" for life, and it cost me $44 and 4 AA batteries to use it whenever.Finally, although I won't utilize the analog item with the "exposed wire," I also won't toss it away.- Cool Customer 10/18/19
4.1/5
MIN/MAX Functions: Measures and holds in display the absolute lowest/highest sound level detected over time
EASY to FIND BATTERIES: Uses 3x AAA (economical and easy to replace)
A wind-shield is included to ensure accurate readings in windy conditions
EXTRA LARGE 1.8" LCD Screen makes readings super easy. EASY TO USE with Intuitive controls. COMPACT & LIGHTWEIGHT: Ideal for every situation
Set up a SOUND ALARM: Screen will light up whenever threshold is reached
$234
I got this meter to compare the noise produced by two pieces of network equipment objectively. I needed the one that was reasonable and the quietest. This meter worked as intended. It effortlessly provides a decibel reading with no hassle. Although I'm unsure if the decibel values were accurate or not, for comparing two objects, I only need a comparison, therefore this was ideal.I nearly sent it back the day I bought it, though, since it appeared like they had altered the rear cover and blocked the battery door from what was pictured in the handbook. After fiddling with it for another ten minutes, I realized that the meter had a plastic protective cover OVER the actual gadget, which was hardly noticeable. To insert the batteries, the meter itself must be removed from the yellow cover (from the back and sides). From the front of the lid, remove the meter.
4.1/5
ã€Convenient & Lightweight】 - The decibel tester is lightweight and easy to carry. With a mounting hole for the tripod， which can be placed on the stand and is easier to measure when your hands are busy
ã€Large LCD Display】 - Clear readings and easy to use at night, widely used in factory, transportation, car, baby room and audio system office, sound quality control in home, school and construction site
ã€Min/Max/Data Hold Function】 -Note: This noise meter has been calibrated at the factory and is calibrated to a standard source. The Sound Level Tester records the minimum and maximum sound decibels around any given time range and freezes the current measurement readings.
ã€Precision measurement & over-range measurement warning sign】- Measurement range: 30-130dBA, accuracy: ±1.5dB, resolution: 0.1dB, there will be a warning sign when the standard exceeds the standard
ã€Auto/Manual Shutdown】 - It will automatically shut down after 10 minutes when not in use. Note: After using, please press and hold the shutdown button for 2 seconds.
$234
The Meterk Sound Level meter is a good entry-level measuring tool for everyday usage. The measuring range for this model is 30 to 130 dBA, with a /- 1.5 dBA accuracy. The frequency range that can be used is 31.5Hz to 8.5kHz. The meter itself includes a sizable LCD screen with large 1" numerals and a simple on/off button for its white backlight, which can be turned on or off independently of the meter's power. The meter automatically records the minimum and maximum sound levels. The min/max button can be used at any moment to recall or reset these. There is also a hold button, which when pressed freezes the reading on the display at the current time. There is absolutely no auditory output from the meter. On the back, there is a typical threaded mount for a tripod. The gadget runs on three AAA batteries (supplied).It was really simple to use the meter. Since the screen updates around every third of a second, it is rather simple to tell if something is becoming gradually louder or softer. I liked how the min/max option could be readily reset at any moment while continuously monitoring the sound. It is comfortable in the hand and works really well for measuring sound levels in general. Overall, it's a fantastic purchase.Make sure you check out and make your payment on the Smile.Amazon.com website whenever and everything you buy from Amazon.com. Your preferred charity will receive a portion of your Amazon purchase as a donation. Helping to change things.
4/5
GIFT BOX PACKAGE - Black carrying pouch and premium color gift box are come with the meter.
USEFUL TOOL IN YOUR WORK & LIFE – This sound level meter is a great tool for checking, monitoring or controlling the sound level of any environments. It is widely applicable for personal, families, business, studies, industrial and etc.
HOLD , MAX & MIN – Including all useful features such as data hold, max recorded reading and min recorded reading as well as auto power off.
WIDE RANGES & ACCURATE MEASUREMENT – It measures range from 30 – 130 dB with frequency range from 31.5 to 4Khz. Highly accurate with +/-1.5dB.
TIME WEIGHTING & FREQUENCY WEIGHTING – FAST(125mS) for time weighting. TYPE A for frequency weighting.
$234
In the past, I have utilized high-precision sound measurement instruments, which were of course rather expensive. This device is relatively inexpensive and provides adequate value. Over the specified bandwidth, it monitors the overall sound pressure level. It in no manner provides sound levels for different bands. Although the accuracy has not been tested, it seems reasonable based on my prior usage of more advanced equipment.It has been used by me to gauge if it would be beneficial to look into the matter further by measuring airplane noise during takeoff and landing. Although it can "get you in the ballpark," I believe this unit isn't up to the task of being used in a professional setting.Overall, it is effective given the cost.
Frequency is the number of times a sound wave repeats itself per second. The unit of measurement for frequency is the hertz (Hz).
Noise can be measured using a sound level meter, which is an instrument that measures sound pressure level. The most common unit of measurement for sound pressure level is the decibel (dB).
Sound meters are used to measure the sound pressure level of a given noise source. This information can be used to determine the noise level at a particular location, or to compare the noise levels of different sources. Sound meters can also be used to measure the sound pressure level of a given noise source over time, which can be used to assess the impact of the noise on the surrounding environment.
There are three primary types of meters in poetry: accentual, syllabic, and quantitative. Each one measures something different: Accentual meter measures the number of stresses, or beats, in a line. Syllabic meter measures the number of syllables in a line. Quantitative meter measures the number of beats in a line according to the length of time it takes to pronounce each syllable.
There are four types of meter in poetry: accentual, syllabic, quantitative, and accentual-syllabic. Each type has its own unique properties that affect the way a poem sounds when it is read aloud. Accentual meter is based on the number of stresses, or beats, in a line of poetry. This type of meter is common in languages that do not have a strict syllable-based structure, such as English. Syllabic meter, on the other hand, is based on the number of syllables in a line. This
There are five main types of meter in poetry: 1. Iambic meter is based on pairs of unstressed and stressed syllables, typically in the pattern of da-DUM. This is the most common type of meter in English poetry. 2. Trochaic meter reverses the iambic pattern, with stressed syllables followed by unstressed ones, typically in the pattern of DUM-da. 3. Anapestic meter also has pairs of unstressed and stressed syllables, but they are arranged in a pattern of two unstressed
COPYRIGHT © 2019
