A skid steer is a versatile piece of equipment that can be used for a variety of tasks, including grading. While a skid steer may not be the ideal machine for every grading job, it can be a great option for smaller projects or for areas that are difficult to access with larger equipment. If you're considering using a skid steer for grading, be sure to consult with an experienced operator to ensure that the job can be safely and effectively completed.
No, skid steer attachments do not fit all brands. Each brand has its own specific attachment system. Some brands might have adapters to fit other brands, but not all brands will have adapters.
Skid steer dozer blades are designed to work with skid steer loaders. The blade is mounted on the front of the skid steer and is used to push or pull material.
Skid steers are one of the most versatile pieces of construction equipment on the market. They can be used for a variety of tasks, including excavating, grading, and loading. Because of their versatility, skid steers hold their value well. If you're considering purchasing a skid steer, you can be confident that it will be a wise investment.
5/5
DIMENSIONS: The fork blades measure at 42†in length. The overall attachment has a width of 45.5†and a height of 19â€. The frame weighs about 105 lbs. This pallet fork and trailer hitch attachment can support a weight capacity of up to 3000 lbs. It has a standard 2-inch hitch receiver to hook up to your trailer.
COMPATIBLE WITH BOBCAT & KUBOTA: This attachment is designed specifically for Bobcat and Kubota mowers and haulers. With this pallet fork and trailer hitch attachment, you’ll be able to perform a myriad of tasks, transforming your skid steer into a multipurpose machine. It’s especially great for farming and construction.
EASY INSTALLATION: With this attachment, you don’t need to worry about difficult instructions or tiny pieces of hardware. It features a universal skid steer hookup, allowing it to attach to several different models of Bobcat and Kubota haulers. Just attach this device to your tractor and you’re all set! It’s that simple.
IDEAL FOR LIGHTWEIGHT TOWING: Convert your skid steer or tractor into a towing machine with this handy receiver mount. It features a standard 2-inch trailer hitch that lets you tow trailers and other tractor implements without taxing your machine’s power or lift capacity. Finally, you can haul away debris, leaves, logs, and more in your trailer, thanks to this convenient trailer hitch.
GREAT FOR HEAVY LIFTING: Don’t strain your back or your equipment when lifting heavy loads. Instead, use these pallet forks by Titan Attachments. This pallet fork can support a weight capacity of up to 3000 lbs. Use it to move and transport logs, lumber, timber, and firewood. This fork is also great for installing fence posts and cleaning up debris and brush.
$234
fantastic stuff My tractor is an LS XJ2025 H with an LL2102 end loader. I removed the pallet fork frame, and it properly suited my loader. There is about a half inch clearance on each side of the fast attach mounts after I drove the tractor up to the frame. I'm able to fit the tractor into the frame and raise it. I then exit the tractor and secure the pins. It is as simple to remove it from the tractor.A MODIFICATION IS NOT REQUIRED. This is what I'm saying since I've read that some other individuals had to adjust their for their tractor, but not for the LS.The 42" length is ideal for picking up brush heaps, and the forks attached without any difficulty. I'm not too excited about picking up branches and leaves because I reside in North Carolina, where there are Copperheads and rattlesnakes. This enables me to move the brush pile safely while keeping a safe distance from it. I've already cleared a lot of brush piles from the path.It helped me hoist my tractor's belly mower so I could work on it. Compared to manually lifting one side, it was much simpler. The entire mower was supported by the long forks.A bundle of 8' fence posts was moved by myself. I truly wish I had this when a shipment of goods on pallets arrived a few months ago. Moving them would have been far simpler than manually unloading the pallets.I've only been unable to lift a complete pallet of T-Posts, and that's it. The tractor just won't raise the weight; it's not the fault of the pallet fork attachment.This is the set of pallet forks to get if you need some for your tractor. Great company to work with and excellent quality.** UPDATED 2/1/19I've been using these forks for about 8 months, and they've well exceeded my expectations in terms of performance.When I have downed trees, I can elevate the logs and use my chainsaw to cut them without cutting into the ground or rocks, which is excellent. Because my tractor's lifting capacity is the only restriction, I cut the logs to a length that I can lift and carry them to wherever I'm splitting and cutting firewood.Instead of carrying them, I relocate fence rails and posts along the fence line. The only issue is that the tractor's post hole digger is not a very effective counterweight, so I have to keep the load on the forks lighter.How did I ever survive without these forks before? That is how I know you will feel if you purchase these forks.
4.7/5
DIMENSIONS: The fork blades measure at 42†in length. The overall attachment has a width of 45.5†and a height of 19â€. The frame weighs about 105 lbs. This pallet fork and trailer hitch attachment can support a weight capacity of up to 3000 lbs. It has a standard 2-inch hitch receiver to hook up to your trailer.
COMPATIBLE WITH BOBCAT & KUBOTA: This attachment is designed specifically for Bobcat and Kubota mowers and haulers. With this pallet fork and trailer hitch attachment, you’ll be able to perform a myriad of tasks, transforming your skid steer into a multipurpose machine. It’s especially great for farming and construction.
EASY INSTALLATION: With this attachment, you don’t need to worry about difficult instructions or tiny pieces of hardware. It features a universal skid steer hookup, allowing it to attach to several different models of Bobcat and Kubota haulers. Just attach this device to your tractor and you’re all set! It’s that simple.
IDEAL FOR LIGHTWEIGHT TOWING: Convert your skid steer or tractor into a towing machine with this handy receiver mount. It features a standard 2-inch trailer hitch that lets you tow trailers and other tractor implements without taxing your machine’s power or lift capacity. Finally, you can haul away debris, leaves, logs, and more in your trailer, thanks to this convenient trailer hitch.
GREAT FOR HEAVY LIFTING: Don’t strain your back or your equipment when lifting heavy loads. Instead, use these pallet forks by Titan Attachments. This pallet fork can support a weight capacity of up to 3000 lbs. Use it to move and transport logs, lumber, timber, and firewood. This fork is also great for installing fence posts and cleaning up debris and brush.
$234
Great forking, these forks. I recently bought a front end loader for a tractor. There was no simple method for me to move a lot of horse panels; I had to put a lot of strain on my back. They were easily moved and lifted with them. I'm sure I'll think of other applications for them. I heartily endorse them.After owning them for a few months, I can now declare that they have proven to be among my tractor's more beneficial attachments. I use them to move and support various things, such as fence posts, fence panels, siding, etc. When you need to dig, it simply takes a few seconds for each to be removed and installed because they are so simple to take off and put on. I've been warned not to use too much pressure since it can bend your bucket, and I take that advice seriously, but I've lifted several hundred pounds without any issues. This has spared me a ton of time and labor-intensive effort. I have no other recommendations.
4.7/5
- Tooth Part #: 23TF - Adapter Part #: 2740-23 - Flex Pin Part #: 23TFP
- Adapter length: 8.6" - Total Assembly length: 12" - Tooth width: 2.9"
- OEM Quality - Heat treated and tempered steel - Medium Wear Teeth
- Set of 5 teeth - Weld On Shank adapter - Tooth Length: 5.9"
- Inside Width of Tooth Pocket: 1.6" - Flex pin dimensions: 2.15" x .7" x .4" - Weight: 37.5 LBS
$234
It would cost $300 including shipping for a complete Bucket teeth with bar assembly. I purchased these teeth, welded them to a 1/2" x 4" x 38" bar, and then attached them to my bucket. Excellent value for a third of the cost of a full assembly. Alternately, you may drill and tap a bucket tooth (for a threaded bolt) and tighten down onto your bucket. I tried both, and they both function extremely well.
4.1/5
This clamp on pallet forks allows you to easily move fence posts, lumber, pallets and logs around
Load Capacity: 4000 lbs; Total Length: 60"; Fork Length: 43"; Fork Height: 2"; Fork Width: 4"
Our clamp on pallet forks can slide over the cutting edge of the your bucket and clamp down locking the unit in place
Bucket Lip Gap: 2" w/o puck and 1 1/2" with puck; Stabilizer Bar: Adjusts from 29"- 44"
Made of high quality materials for superior durability and stability; fits most skid steers and tractors
$234
Good pricing, sturdy product. Despite being heavy, the forks are simple to attach and function well on the loader of my subcompact tractor. I'm using them to gather up huge piles of the tree and branch debris I've cut. It was easy and effective to insert two three-foot 2x3 boards into the forks to stop branches from falling rearward toward the operator. The loader bucket's surface is scratched by the attachment screws as expected, but that's not a problem. The cross brace is simple to install and can be adjusted to fit any fork width. When raising loads of brush, the forks must remain parallel. In addition, I lifted a small trailer loaded with rubbish using the forks rather than stopping to secure the trailer to the tractor's back. The forks worked great when I tested them on a wooden pallet that had a sizable planter on it. When UPS delivered the package, it was almost completely wrecked, yet the forks were undamaged, and no hardware was lost.
4/5
CHAIN HOLES FOR HEAVY LIFTING: Being able to secure your heavy load onto the forks of your front loader is crucial for both safety and efficiency. As part of our exceptional design, we’ve included chain holes so that you can use chains to secure loads and to act as a stabilizer for heavy equipment or the larger load that you are moving.
VERSATILE EQUIPMENT: These pallet forks can be attached over the cutting edge of the bucket of tractors and secured into place with the clamps. This kind of versatility creates an opportunity for you to use it across various brands of tractors, such as the Ford 8n, 9n, Kubota, or John Deere tractors. It’s a great addition to your farm accessories but can also be used to haul building supplies.
4,000 LBS CAPACITY: Through superior design, we’ve created our Titan tractor fork attachments to be able to hold weight up to 4,000 pounds. This means that they are able to lift heavy things like fence posts, lumber, pallets, logs, or other parts you need moved around. Simply slide the clamp over the edge of your bucket and lock it in place for a sturdy heavy-lifting solution.
HEAVY-DUTY MATERIAL: Working with heavy lifting and large loads mean that we had to create something that would be durable. We’ve used a heavy-duty material and expert welding to construct the forks and the thick, rectangular tube walls. The length of each fork is 43†and the fork width is 4â€. The total length, once installed, is 60â€.
ROLL BACK PROTECTION SLOTS: Part of what makes up our professional design is our focus on safety. When you need a quick solution for hauling lumber or a hay bale, you shouldn’t need to sacrifice your, or anyone else's, safety. Our roll back protection slots can help keep your heavy loads right on the forks where they should be.
$234
The required weight to unload a package from a truck was supported by this item. The bucket capacity of my front loader won't even come close to fitting the prongs. I had the foresight to perform a load point distribution on the distance between the tip of my Titan Clamp Heavy Duty Pallet Forks and the front of my front loader. This is different from the front loader tip capacity and load capacity. The Titan forks can support a weight of 250 lbs. at the tip and are based on a Kubota B series front loader with a load capacity of 765 lbs. This load rate is based on the front loader's maximum load capacity rather than the Titan Clamp on Heavy Duty. I needed a fork system that could sustain the tip load since I needed a load pushed off of a flat bed truck. One could support a weight of 250 lbs at the front loader's tip. However, if the fork tips were supported, the greatest weight that could be carried if the load was pushed to the base of the fork up against the edge of the front loader would only be 650. Keep in mind that this is for a Kubota B series tractor with a front loader weighing 765 lbs. Do your load calculations, remember.
4/5
Blade clamp measures ½†wide x 2†deep with Overall Dimensions of 12†x 7.5†x 2.25†for easy portability; perfect for Building log homes, fence posts, deck planks, and so much more
Saves you valuable time and money and is ideal for cutting planks, posts, or beams 1 year limited manufacturer's parts warranty
Converts your chain saw into a portable sawmill; attaches to any chain saw with quick and easy assembly – Universal bar length
Constructed of solid Steel with a powder-coat finish for long-lasting durability that will resist corrosion
Guides your chain saw to give you straight and even beams – simply secure a 2†x 4†to any log and cut your desired lumber; bright green color for easy visibility
$234
My Timber Tuff Beam Cutter was recently unpacked. It's quite possible that this is the worst "owner's handbook" I have ever read, which is saying a lot considering that I formerly LIVED in China. I was taken aback to discover three pointed pins on the tool's bottom because I had assumed it was meant to slide on a 2x4. Given the weight of the saw and other factors, the pegs are likely to entrap material. Unfortunately, the owner's documentation contains zero instructions on how to set up the tool, clamp the saw into it, or, to be completely honest, provide any other relevant information. Nearly the full "manual" is seen in the photo I attached. The model number, the identical photo that Amazon uses, and the accompanying pointless warning are all on the front page "Before using, carefully read and comprehend all ASSEMBLY AND OPERATION INSTRUCTIONS. Serious injury could come from disregarding the safety regulations and other fundamental safety measures." The following maintenance advice is found on the rear cover of the tool (remember, this is a single sheet of paper): "Keep the beam cutter in good repair by adopting a program of careful repair and maintenance in line with the suggested techniques provided in this manual." Right. Therefore, since the handbook contains no processes of any type, do nothing. Look, I get it; for $20, what could I expect? Let's start by asking for an explanation of what those three pointed pins are supposed to accomplish for me. But it comes in a pretty attractive and robust packaging. If I can make it work, I'll let you know.UPDATE: Using this device is best learned by doing. My main mistake was expecting you could simply clamp in your saw and slide the channel along the 2x4. In reality, you cut in stages. First, you place the beam cutter channel, then you rock the saw in an arc to make a cut, then you move the beam cutter down the 2x4 and repeat. While you make the cut, the object is kept steady by the pins. But there's still one problem. You must attempt to hold the inside edge of the channel against the 2x4 in order to produce a constant thickness that won't require extensive planing because the channel is too broad. But it's tricky to do. To take up the slack, I drilled, tapped, and put bolts in the edge across from the saw clamp. This tightens everything up, provides the tool greater stability, and gives you one less thing to focus on when making the cuts. For $20, or even for three times that amount, this is a truly fantastic tool.
3.7/5
Made of high quality welded steel construction for superior durability and stability; fits most skid steers and tractors
Our clamp on pallet forks can slide over the cutting edge of the your bucket and clamp down locking the unit in place
Load Capacity: 1500 lbs; Total Length: 43"; Fork Length: 30"; Fork Height: 2"; Fork Width: 3.25"
Bucket Lip Gap: 2" w/o puck and 1 1/2" with puck; Stabilizer Bar: Adjusts from 23.5"- 40.5"
This clamp on pallet forks allows you to easily move fence posts, lumber, pallets and logs around; Uses 2" x 3†boards for roll back protection
$234
Good pricing, sturdy product. Despite being heavy, the forks are simple to attach and function well on the loader of my subcompact tractor. I'm using them to gather up huge piles of the tree and branch debris I've cut. It was easy and effective to insert two three-foot 2x3 boards into the forks to stop branches from falling rearward toward the operator. The loader bucket's surface is scratched by the attachment screws as expected, but that's not a problem. The cross brace is simple to install and can be adjusted to fit any fork width. When raising loads of brush, the forks must remain parallel. In addition, I lifted a small trailer loaded with rubbish using the forks rather than stopping to secure the trailer to the tractor's back. The forks worked great when I tested them on a wooden pallet that had a sizable planter on it. When UPS delivered the package, it was almost completely wrecked, yet the forks were undamaged, and no hardware was lost.
Skid steers are one of the most versatile and popular pieces of construction equipment on the market. They are also one of the most expensive, so it’s important to know how long their parts will last. One of the most important parts of a skid steer is the rubber tracks. These provide traction and stability for the machine, and they can last for years with proper care. Most skid steer tracks will last for about 500 hours of use. However, this can vary depending on the type of terrain you’re using the machine on. If you
A high flow rate is typically considered anything above 5 gallons per minute. This is especially true for water lines, as higher flow rates can cause issues with the pipes themselves.
A skid steer needs to be serviced every 50 hours or every six months, whichever comes first.
It is typically recommended to change the oil in a skid steer every 250 hours, or once a year - whichever comes first.
The top 5 skid steers, according to Contractor Magazine, are the Bobcat T590, the John Deere 333G, the Caterpillar 246D, the Case TV380, and the New Holland L225.
COPYRIGHT © 2019
