Yes, side cutters can cut wire. They are designed to cut through thin metal, including wire. The cutting blades on side cutters are sharp and serrated, making them ideal for cutting through metal.
Ironworkers pliers are a type of pliers that are specifically designed for use by ironworkers. They are typically made from high-quality steel and are designed to be durable and sturdy. Ironworkers pliers are used for a variety of tasks, including cutting and shaping metal, removing nails and bolts, and gripping and holding metal pieces.
Side cutting pliers are used for cutting and trimming wire, as well as for other light cutting tasks. The blades of side cutting pliers are beveled on both sides, allowing for a clean cut with minimal effort.
4.8/5
Mpn: 74 01 200 SBA
Manufacturer: Knipex
Country of manufacture: Germany
$234
Since Mythbusters' Jamie Hyneman complimented them, I've been eager to try a set. Since I already had quite a few side cutters and linesman pliers from Gearwrench and Channellock, I wasn't in a rush. I purchased them when Amazon offered a discount on them. I knew the quality would be there because I already had 3 sizes of Knipex Plierswrench and 2 sizes of Knipex Cobra pliers, but what truly shocked me was how much better they sliced. (I contrasted them with the brand-new, unused Channellocks side cutters I keep in my off-road backpack.)These enabled me to quickly replace the safety wires on my garage door springs by allowing me to simply cut the outdated connections off. I didn't have to struggle to stop myself from losing a lot of cable clamps. The only ones that can penetrate the 1/8 are these "with little difficulty, wire rope. Additionally, they cut better and needed less pressure than the Knipex 8 "bolt cuttersI now consider these to be my "go to" cutters, and I can see why Jamie thinks so highly of them.
4.7/5
Custom, US-made tool steel
Short jaws and beveled cutting edges permit close cutting of wire
Induction-hardened cutting knives for long life
Plastic-dipped handles for comfort and ease of identification
For soft annealed rebar tie wire
$234
La cortadora de medida 7 es muy til en lo que es el área de mi trabajo ya que yo trabajo en la varilla y ya que con es cortadoras yo puedo cortar alambre o amarres que no me quedan bien ya con esas cortadoras y
4.7/5
Induction hardened cutting knives for long life
Hot-riveted joint ensures smooth action and no handle wobble
N/A
Unique handle tempering helps absorb the ''snap'' when cutting wire
Streamlined design with sure-gripping, cross-hatched knurled jaws
Made in USA
High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs
$234
These pliers are just excellent. They have durable high quality tool steel, a basic sturdy design prepared for your toughest operations, and finely textured handles. They fit perfectly in my hands and were a great addition to my toolkit without costing as much as Snap-On or Matco tools would have. The pliers were really stiff when they were first opened, but they have easily relaxed.Knipex, Klein, or Channellock all produce outstanding pliers, but each has advantages and disadvantages that you might want to take into account. It appears that most people these days choose one of these three brands when looking for high-quality pliers. I did some study, and the conclusion is as follows:Be aware that Channellock pliers often have more rust resistance than Klein pliers. Klein and many Knipex pliers lack the electronic coating that is present on the majority of Channellock pliers, which are used to prevent rust. This can be your best choice if you reside in a humid climate or close to the shore. My location in a desert means that it isn't a major issue. Another slightly less expensive alternative is channellock pliers.German-made Knipex pliers are of exceptional quality. They produce tools for both serious DIYers and experts, such as Channellock and Klein. Their tempering and hardening technique is arguably the greatest there is, and their tool steel is exceptionally robust. People who have bent Knipex tools have reported that over time, the tempering in the tool helps it to return to its original shape. Although these are among the priciest possibilities and the company is based in Germany, customer service may be a little more challenging if you end up with a lemon, I am unaware of any other manufacturer that will do that.Compared to Channellock, Klein's tool steel simply seems to be more durable when cutting metal screws or wires. Although the steel grade of Knipex products is comparable, I believe Channellocks to be a little softer with time.Almost everything can be done with a plier from Channellock. They probably have any plier you can think of. excellent varietyBoth Klein and Channellock pliers are ferociously created in the United States of America. good to seeI haven't seen any very sleek designs in pliers like this from Klein or Channellock, although Knipex has some.Hope this was useful.
4.6/5
Meets or exceeds ANSI specifications
Backed by the IRWIN VISE-GRIP Lifetime Guarantee
ProTouch grips provide extra comfort and reduces hand fatigue
Induction hardened cutting edge stays sharper, longer
Durable nickel chromium steel construction
$234
I especially purchased these diagonal pliers to be used for electrical work. Though it requires some arm strength, they manage to cut through 12g. romex, severing all the wires together rather than simply one at a time. Individual 12g solid copper wires are easily sliced through by them. The cutting edge isn't perfect, but it serves my purposes just fine. I imagine a file might be used to rapidly and easily provide a much better edge. I liked them so much that I actually bought a second pair to keep in my regular toolbox and the other pair in my electrical toolbox. The handles on the Irwin vise grip line of pliers I own have never come off, and I actually think they are a wonderful addition for comfort, aesthetics, and ease of finding in a pile of things. I just deducted one rating for the slight edge quality and alignment, but given the price, I'm not sure they shouldn't have received five stars.
4.6/5
High-leverage design. Rivet is closer to the cutting edge for 36-percent greater cutting power than other plier designs
Short jaws and beveled cutting edges permit close cutting of wire
Induction-hardened cutting knives for long life
Angled head design for easy work in confined spaces
Hot-riveted joint ensures smooth action and no handle wobble
$234
I mean, it's Klein; what else is there to say?ADVANCED 11/28/2016The other day someone used my Klein's, "Where did you acquire these, man? They're excellent!"My dog's life was spared by these cutters. My wife trained her standard poodle by fitting him with a choke collar. Poor idea. I was seated on the back deck when he abruptly began vigorously flopping. I leaped down and landed on him, pinning him to the deck. The collar's ring had fallen through a gap and became lodged. His air supply was totally shut off by the chain. I yelled for my wife, telling her to keep the man still as I tried to loosen the chain. Fortunately, I'm one of those persons who believes that everything has a proper place. I quickly grabbed my Klein's and raced to my tool cabinet. The Kleins effortlessly cut through the thick chain. My wife was happy tears crying.Get some Klein cutters, then.2. Recognize their placement3 A choke collar will kill any animal you put one on.
4.5/5
1. Wide Application --- This Multifunction Car Push Retainer Rivet Trim Clip Pry Puller is great for most models: Honda, BMW, Mercedes, Nissan, Toyota, Chevy, GMC, Ford, Dodge ects. You can use it to pull car door trim clips, cutting seals buckles with various sizes.
3. Size --- Length: 17.5cm / 7 inches around; Weight :170g / 0.37IB. It is lightweight to use and carrying!
5. 100% Satisfaction Assurance --- If you have any problem with our products, please feel free to contact me! We will provide you FULL REFUND & FREE REPLACEMENT & FREE RETURN & QUICK RESPONSE services!!!
2. High Quality --- Made from Zinc Plated Carbon Steel, it is anti-corrsion and non-rust, very sharp and durable!
4. Scientific Design --- It is designed with a ergonomic handle, which is comfotable for long time use! Besides, there is a special spring on the plier, which will save your labor and make your work easier!
$234
I've been using these pliers in a professional setting as a Toyota technician, and I really like them thus far. They effortlessly remove plastic clips. incredibly helpful gadget I gave it four stars since I have some reservations about its durability. By design, the tips are thin, which is good since they need to be; but, care must be taken when using the tool; in my opinion, if a twisting action is employed instead of a lever motion, the tips could bend or shatter quite quickly. Additionally, when I tried using these to cut zip ties, they didn't cut very well, but they really bit into plastic clips. In conclusion, I find the item to be quite helpful and would likely purchase it again if it were to break.
4.5/5
Twin blades are induction hardened for superior performance
Cut copper, aluminum, and steel wire (solid, stranded, or braided), metal bands, and small nails
Slim, nonslip grips provide comfort and control without adding bulk
High-leverage jaws and long handles deliver more cutting power with less effort
Made from high-strength chrome vanadium steel
$234
To my disappointment, I was unable to find the Knipex version of these cutters on their website when I first went out to purchase them. Instead, when browsing Amazon, I came across these. My expectations were more or less established by the ridiculously low pricing. These pliers definitely exceeded my expectations. They are often used by me when I occasionally cut wire and hard line (such as the brake and power steering systems). After a few months of consistent use, they still retain all of their sharpness. Anyone searching for an excellent set of cutting pliers should consider these, in my opinion.
4.5/5
Holds all sizes of Pliers
Lifetime Guaranteed
Holds 15 sets of Pliers
Mounts on your pegboard
Pliers automatically tilt back
$234
I was a little hesitant to buy things because I've bought a lot of things in the past that seemed like a good idea at the time but ended up being badly executed, over-hyped, or just plain poorly constructed. I was quite happy with how it felt when I first got it. Although it is plastic, it is strong and feels solid. Half of me anticipated something that felt like weak, inexpensive plastic.I then filled it with pliers and propped it up against the wall behind my workbench. As stated in the product description, the pliers simply tipped back by themselves, and that is exactly what happened. My spring-loaded handles were stable and didn't go over, however a few of them were somewhat more upright than slanted back.The slots on the right side are criticized in other reviews as being excessively small. Although they are a little bit thin, they are perfect for my smaller pliers and I can still fit my regular pliers in them.After buying it, the only real problem I have is that I've realized how many sets of pliers I actually own, which is humiliating. One is already hanging from my pegboard above my workbench, and I'm planning to get a second one for my tool wall (one wall of the garage covered in pegboard).I've seen some criticism of the pegboard mounting hardware. The provided rivets were not used because I was unable to figure out how they functioned right away. This worked great because I had some additional plastic rivets on hand. Since then, I've seen the instructions the seller supplied (in response to a question here on Amazon), and I'll attach the next one I get using the rivets that are provided.This product fulfilled all of the promises made, performed precisely as promised in the description, and was well-built. The description appears to be very honest, and I believe this proves that the seller has never actually held a position in advertising.Yes, I do have scissors, channel locks, wire stipplers, and even a Visegrip in the rack. I need to buy another rack because the third picture shows some extra pliers I have. I've tried them all in the rack, and it works great for holding them all.
4.4/5
Meets or exceeds ANSI specifications
Induction hardened cutting edge stays sharper, longer
ProTouch grips provide extra comfort and reduces hand fatigue
Machined jaws for maximum gripping strength
Durable nickel chromium steel construction
$234
These IRWIN pliers were purchased for an electrical course, and over the course of two months, they got a lot of use. Some of the other guys were wearing name brands as well as off-brands. By the time I was done, my IRWINs were still cutting easily and were wide enough to allow for the twisting of any four solid copper wires without it breaking. Cutter is a pretty nicely built tool, with the exception of some residual copper. I'm happy with my purchase and eager to use them if I need to wire nut or remove any wiring that is 10 or higher AWG.
4.4/5
Only Channellock uses a knife and anvil style cutting edge to ensure perfect mating and superior cutting edge life
High leverage lap joint Diagonal
Laser heat-treated cutting edges last longer
Made in the USA
Channellock uses high-carbon steel for superior performance on the job and specially coated for ultimate rust prevention
$234
These are intended to replace a damaged pair of Kobalt diagonal cutters (with chipped cutting edges). Although Lowe's customer service was excellent to deal with, I required an upgrade since the Kobalt broke so quickly (removing less than 100 yards of old fence while also severing the variety of wires that the previous owners had used to secure cow panels on posts). Should have chosen the Channellock brand right away. Despite the fact that Kobalt tools are decent (I have Kobalt wrench and socket sets), there really isn't a better plier manufacturer than possibly Klein, and even that is debatable.Just spend the money now and purchase Channellock. Spend once, weep once.And they cost less there than at the shop.
There are four types of cutting tools: lathes, milling machines, saws, and grinders. Each type of machine has its own unique set of benefits and drawbacks that must be considered when choosing the right machine for a specific project. Lathes are versatile machines that can be used for a wide range of projects, from cutting wood to shaping metal. However, they are not well suited for large projects or projects that require precise cuts. Milling machines are ideal for large projects or projects that require precise cuts. However, they are not well suited for cutting
A side cutter is a type of cutting tool that is often used by plumbers and electricians. It is also known as a diagonal cutter or a flush cutter. Side cutters are used to cut wire, cable, and tubing. They are also used to cut through nails and screws.
A side cut tool is a cutting tool that is used to create a smooth, clean cut on a workpiece. It is typically used on softer materials such as wood, plastic, or aluminum. The side cut tool can be used by hand or with a power tool such as a drill or router.
The other name for side cutter pliers is diagonal cutting pliers.
There are a variety of cutting tools available to suit different applications. Here are five examples: 1. Hacksaw: A hacksaw is a handheld tool used for cutting various materials, including metal, plastic, and wood. It consists of a blade with sharp teeth that is mounted onto a frame. 2. Jigsaw: A jigsaw is a power tool that can be used to cut curved or irregular shapes in wood, metal, or plastic. It consists of a blade with teeth that is moved up and down by a motor. 3. Band saw:
COPYRIGHT © 2019
