Best Scroll Saw Blades in 2022

Last update: December 31, 2022

Can a scroll saw cut through hardwood?

Scroll saws are designed to cut through a variety of materials, including hardwoods. The size and type of scroll saw you use will determine the thickness of hardwood that it can cut through. Generally, scroll saws can cut through hardwoods that are up to 1 inch thick.

Do all scroll saws use the same blades?

No, all scroll saws do not use the same blades. There are different types of scroll saw blades available that are designed for different materials and applications.

How do I choose a scroll saw blade?

There are many different types of scroll saw blades available on the market, so it can be difficult to know which one to choose. The best way to select a scroll saw blade is to first decide what type of material you will be cutting most often. If you plan to cut a lot of hardwoods, then you will need a different type of blade than if you plan to cut mostly softwoods or plastics. Once you know what type of material you will be cutting most often, you can then narrow down your choices by considering the different blade sizes and tooth configurations. Scroll saw blades

How often should I change my scroll saw blade?

Scroll saw blades should be changed when they become dull. Depending on how often the scroll saw is used, this could be every few weeks or every few months.


Olson Saw FR49400 Skip Tooth Scroll Saw Blade Assortment Review:


acquiring scroll saw skills. bought a brand-new Dewalt scroll saw. It had two blades in it. Could not locate painless blades in the area. a variety of Olson skip tooth blades were ordered. I only used #5 size. work flawlessly. excellent outcomes I've produced a number of complicated patterns with great success. Strongly advise.



Olson Saw PG49802 Precision Ground Scroll Saw Blade Review:


These have worked well for me on my Delta 40-560 scroll saw for the past few weeks. The cuts on the pine, cedar, and oak wood types I've used it on so far (so far, I've used a 12/8



OLSON SAW 2-Pack FR49501 Pin End Scroll Saw Blade Review:


I was initially ecstatic to discover pin blades. I lent my mother-in-law my ancient Clarke scroll saw (it has never been used). However, none of the nearby shops supply scroll saw blades, and I damaged the original blade. These arrived promptly and in nice shape. Although they are sharp, I have a hard time breaking these. Just 20 minutes of cutting seems to cause the pins to snap in half. Although I've tried loosing and tightening the tension, the problem persists. The blades are cutting extremely nicely, however I won't be using these again if I can only get 20 minutes out of a blade. I truly hope it's operator error because it's something that can be corrected. If I find out more, I'll update this.ADVANCED 7/11/13. After some additional experience, I changed the rating to 5 stars after realizing the issues were caused by operator error. The majority of newbies don't put enough tension on the blade, according to EVERY website I checked and YouTube video I watched, but not this ID10T! Many people wonder how the blades lasted so long. I had them cranked up to a HIGH A pitch! (After experiencing the first tension, I turned the tensioner at least six full turns even though I only needed two to two and a half). So the blade failure I was observing was entirely the result of operator error. I even fixed two of the blades with pins from the broken blades and some JB weld, and they are holding up now that I'm a little gentler on the blades. I've been enjoying using the saw so much that I've been strongly tempted to buy a better saw. Anyone who owns a saw that only accepts pin blades must have these blades. If I can't get my wife to buy a new saw, I will be ordering more.



Olson Saw FR43001 Pin End Hobby Scroll Saw Blade Review:


Pinched blades are growing tougher to locate (I typically can't get them locally). Although I don't use a scroll saw frequently enough to justify investing in a 16" throat with a 5"blade, the Dremel "Moto-Shop" is hardly useful without pinned blades (the only accessories I have are a sanding disk and a flex cable). These blades cut well and operate well. slow cutting for 1 "hardwood (as a result of the sawdust filling the teeth. Good, quick cuts on thinner materials (about 1/4 ") For thicker timber, I'd like a skip-tooth, but that requires more sanding to complete the cut. I bought what was supposed to be "Skip tooth," but they aren't! Overall, good blades, of course with Olson, withstood the torture I put out on scroll saws (hurried, too sharp corners, insane angles 30-45 degrees on the deck). I only cut around 30" total (6 to 5" cuts), but if you have longer cuts, be warned that even with a reasonably aggressive 15TPI, you'll be moving very slowly.



Olson Saw SP46500 Spiral Scroll Saw Blade Review:


These blades efficiently and uniformly cut through all types of wood. I think they are a fantastic addition to any pinless scroll saw and advise anyone who needs exceptional cutting precision to have one. The sole drawback of 360-degree blades is their poor ability to cut straight lines, but you probably have several of them in your drawer anyhow. 100% endorsed. If you found this review useful, kindly select the relevant button from the list below. Thanks.



SKIL 80181 Scroll Saw Blade Set, 18 Piece Review:


I was fortunate. I believed my machine to be non-pin only. I mistook these for blades without pins. It turned out that it could accept pin blades and had removable adapters. I didn't order it wrong, then. yay! These sliced beautifully. I'm overjoyed. with my first scroll saw, I was being a geek.



Pike Jeweler's Saw Blades #3/0 144 Pack Review:


Copper is simply slid through by these blades (with blade lubricated). I only had one break, but the copper had severely compressed the blade at the time. They are sent safely and very nicely. There were two seals on my shipment. The double seal, in my opinion, prevents moisture, which is good. These will be the only percing blades I purchase unless I find something better. They do certainly contain the quantity promised. [::UPDATE::] When cutting copper, these blades have held up amazingly well. I haven't used them to cut any other metals yet, but I did manage to get a lot of jump rings off of one blade. I hold broken blades on one side of the inner plastic liner.



SE 144-Piece Jeweler’s Piercing Saw Blade Set Review:


I cannot comment on how well they serve their stated purpose because I purchased these items for crafting. They have primarily been used by me to modify Reaper miniatures (sawing off weapons and other minor bits), however I have also occasionally used them to construct miniature terrain. The blade set I received is exactly like the one in the picture. I don't know how many I got because I didn't count them, but my set wasn't rusted. Although these things do break quite readily, I'm unsure if this is typical because I've never worked with jeweler's saw blades previously. I can only assume that anyone who intended to use this instrument frequently or who attempted to use them for their intended function would find these blades to be quite inconvenient. I would definitely grade these blades as a 1 or a 0, if there were an option, if I had been one of those people who purchased them.On the other hand, if you intend to saw through soft metal infrequently (6 or 7 times a year) and don't want to spend a lot of money on something you won't use frequently, you might want to give these a try. Plus, you can be creative and reuse the damaged saw blades if you're using these for tiny wargames.


How thick of wood can you cut with a scroll saw?

Scroll saws are very versatile tools that can be used to cut a wide variety of materials, including wood. The thickness of wood that a scroll saw can cut will depend on the size and power of the scroll saw as well as the type of blade that is being used. Generally speaking, most scroll saws can cut wood up to about 2 inches thick, but some larger and more powerful scroll saws can cut wood up to 6 inches thick. The type of blade that is being used will also affect the thickness of wood that can be cut, with thinner blades being able to cut thinner

How tight should a scroll saw blade be?

Assuming you are referring to a scroll saw blade for woodworking: The blade should be tight enough that there is no up and down movement when cutting, but not so tight that it is difficult to insert or remove the blade.

Is more teeth on a saw blade better?

A saw blade with more teeth will cut faster than a saw blade with fewer teeth. The trade-off is that a saw blade with more teeth will produce a rougher cut.

What are spiral scroll saw blades for?

Spiral scroll saw blades are used for making intricate cuts in wood. They are also known as spiral-tooth blades or scroll-saw blades. The blades have teeth that are arranged in a spiral pattern around the blade, making them ideal for cutting curved or intricate patterns.

What are the disadvantages of a scroll saw?

A scroll saw is a type of saw that is used to cut intricate shapes and curves into wood. The scroll saw is a very versatile tool and can be used to create a wide variety of different projects. However, there are some disadvantages to using a scroll saw. One of the biggest disadvantages is that it can be very difficult to control the saw. If you are not careful, you can easily cut yourself or damage the wood you are working on. Another disadvantage of a scroll saw is that it can be very time consuming to use. It can take a long time to

What blades are best for scroll saw?

There are many different types of blades available for use with a scroll saw, and the best blade to use will depend on the specific project you are working on. For general woodworking projects, a good all-purpose blade is the best option. For more delicate work, such as cutting inlays or intarsia, a thinner blade is a better choice. If you are cutting metal or other materials, there are also specialized blades available. Experiment with different types of blades to see which ones work best for the projects you enjoy doing the most.