Yes, you can use LED bulbs in recessed lighting. LED bulbs are more energy-efficient than traditional incandescent bulbs, and they last longer, too. So, if you're looking to save money on your energy bill and reduce your environmental impact, LED bulbs are a great choice for recessed lighting.
Can you have too many can lights? The answer is yes, you can have too many can lights. If you have too many can lights, it can create a glare and make it difficult to see. It can also make a room feel too bright and sterile.
Yes, you can paint recessed lighting housing, but it's not recommended. The heat from the lightbulb can cause the paint to blister and peel, and it's difficult to get a even coat of paint on the curved surface of the housing.
Recessed lights, also called can lights, are a type of light fixture that is installed into a hole in the ceiling. They are often used to provide task lighting or accent lighting in a room. Recessed lights need a junction box to be installed properly. This is because the junction box provides a place to connect the wires for the light fixture. Without a junction box, the wires would be exposed and could cause a fire hazard.
4.7/5
✅ UL & TITLE 24 - We uphold the highest standards for all our products by testing each product for optimal performance and safety. Our new construction housing are compliant with Title 24 energy efficiency standards.
✅ SIMPLE INSTALL - Follow our easy instruction guide for a fast and secure setup! Sunco's direct wire new construction cans with junction box are installed to the framing with the bar hangers (prior to drywall). TP24 connector included.
✅ AIR TIGHT & IC RATED - Sunco's new construction cans are airtight and thermally protected and designed to be installed in the ceiling surrounded by insulation. Sunco's cans won't overheat and cause a fire in the roof or overhead joist space. Airtight design keeps air conditioning or heating from leaking out of the home through the housing.
✅ SUNCO BENEFITS - 10-Year Warranty! Sunco is proudly based in the USA, offering quality products at affordable prices backed by industry-leading warranties and knowledgeable support specialists.
Top Rated 4 Inch New Construction Can
$234
They are superbly constructed and will serve as excellent accent lights throughout my home. Only the legs and nails used to mount the can are the reason I gave this four stars. It was very difficult to drive the nail straight in because the legs were so flimsy and so close to the slide rail that the can rests on. If the wood's grain prevented the nail from going in straight, it would kick off to one side or the other, making it impossible to drive the nail any further. However, it is much simpler to use roofing nails in the other holes rather than the ones that come with the furniture. Since the rest of the can is so nicely crafted and will no doubt last a very long time, the criticism is actually rather minor. The wago 3 port push wire connectors make wiring simple, and the j-box has an inherent method of securing the wire so you don't need to buy anything to be in compliance when installing wire in a metal box. I posted a picture of the label on the can itself, which for some reason is not featured in the description but gives the can's ratings.
4.7/5
HIGHLY RATED FOR MULTIPLE LOCATIONS - CSA, IC, Airtight and Wet Location listed make LED Wafer ideal for indoor and outdoor residential, hospitality, commercial and multifamily applications and safe to contact insulation.Tips: Customer should verify that fixture is wired properly and verify that the line voltage at the fixture is correct
ULTRA THIN LED design only requires a 6 inch ceiling hole and 2 inches of ceiling space are needed to fit LED wafer recessed light and UL recognized driver.SAVES MONEY AND TIME changing bulbs - Energy Star rating provides high light output with minimal power usage and will last 36,000 hours or +16 years when on every day for 6 hours/day
EASY AND SAFE INSTALLATION - innovative, slim design allows for easy retrofit, remodel or new construction installation from below the ceiling. Only need 2" clearance for install
EXTREMELY BRIGHT DIMMABLE LEDs use 13 watts to provide 1,020 lumens with an 80 CRI, close to 80 lumens per watt. Dims down to 10% and compatible with select Lutron, Levitron, Synergy and Sensor Switch dimmers
Connect directly to 120V power supply via provided UL recognized driver
$234
These have been tested, but not yet installed. As shown in the picture, there was no safety cable or wire between the light bezel and the driver box. Easy to install, it seems. For this 75 Watt equivalent, most people will desire a dimmer. If the LEDs and driver electronics last the full 36000 hours as expected, this might be a fantastic device. The related Acuity Warrantee is valid for 3 years providing the driver module is interchangeable.Lithonia's owner, Acuity Brands Support, suggests the dimmers in the accompanying "picture" (very different than the list provided in the Amazon Lithonia description "Specification Sht" PDF)tested a successfully "With the following dimmers, Lithonia Lighting WF6 LED 40K MW M6 13.6W Ultra Thin 6" Dimmable LED Recessed Ceiling Light, White(1) Lutron MACL-153M RHW-WH starter kit with two (2) 3-way dimmers with faceplates fully controllable from two locations (includes: 1 MACL-153M-XX, 1 MA-R-XX, and 2 CW-1-XX); currently available for around $40 on Amazon.com as the Lutron-Incandescent-Single-Pole-Multi-Location-MACL-153M-RHW-WH. (No "buzzing discovered)(2) A single-location deal on a Lutron SKYLARK CTCL-150H dimmer is now available for $19.00 (very minor buzzing - must hold driver enclosure up to ear to hear anything)Will attempt to offer a follow-up evaluation after the installation of 12 fixtures.
4.7/5
✅ SIMPLE INSTALL - Follow our easy instruction guide for a fast and secure setup! Sunco's direct wire remodel cans with junction box are installed to the framing with the bar hangers (prior to drywall). TP24 connector included.
✅ SUNCO BENEFITS - 10-Year Warranty! Sunco is proudly based in the USA, offering quality products at affordable prices backed by industry-leading warranties and knowledgeable support specialists.
Top Rated 6 Inch Remodel Can
✅ UL & TITLE 24 - We uphold the highest standards for all our products by testing each product for optimal performance and safety. Our remodel housing are compliant with Title 24 energy efficiency standards.
✅ AIR TIGHT & IC RATED - Sunco's remodel cans are airtight and thermally protected and designed to be installed in the ceiling surrounded by insulation. Sunco's cans won't overheat and cause a fire in the roof or overhead joist space. Airtight design keeps air conditioning or heating from leaking out of the home through the housing.
$234
These are well constructed from metal that is sufficiently thick, the junction box has enough of space, and the push-in connectors make wiring simple. But there are drawbacks. The clamps are the worst I've ever encountered on any housing brand. You should avoid placing your fixture any closer than two inches from a joist since their legs spread out further than usual. They were challenging to install in our 1-inch-thick plaster ceilings; 1/2-inch drywall would have definitely been simpler. The hole size has very little adjustability. You will need to make 4 tiny notches for the clip tabs because the pattern makes the hole too small for them to fit through. The can's lip has very limited tolerance, so don't make the hole too big. I used rope caulk to seal the hole where the wire emerges from the housing. Due to the low cost, I'll definitely purchase more of them, however they are not the most convenient to use.
4.6/5
Widely Application: 5%-100% smooth dimming, compatible with most dimmers, this bright light can illuminate various applications such as closets, kitchens, hallways, doorways, basement and so on
Reliable Safety: ETL-listed safety standards, the aluminum light guarantees corrosion protection and rust prevention, and the sponge gasket effectively improves the sealing performance, which is a perfect light that you must have for your roof and ceiling
Space-saving Solution: This low profile sliver LED recessed ceiling light, high brightness. Only requires 2 inches clearance of ceiling space, perfect solution for your narrow ceiling that doesn’t fit for a can
High-efficiency Lightness: Energy Star certified slim light, only consume 12 watts, provide 850lm brightness which equals to a 100W halogen lamp, saving $2091 per set in its 36,000 hrs lifespan; frosted LED lens, anti-glare and scratch resistant
Simple Installation: Connect the provided J-box to the light using male/female cable and use spring clip to fix it on the ceiling, hassle-free, install in seconds. Recessed can is no longer a limitation for your choice. This IC rated light is permitted to be in contact with insulations in ceilings
$234
These lights come with almost all of the parts you need to install. Junction box, wire connectors and screws. It does NOT come with the push in cable connectors which are required by code because the box is metal with sharp edges where the wire comes in. (See picture) I'd suggest taking the box to the blue or orange store to measure and make sure the connectors you buy fit. If you order them online it might not fit right. See my review this and you'll see why this one didn't fit: https://www.amazon.com/gp/product/B00422M1XG/ref=oh aui detailpage o06 s00?ie=UTF8
4.6/5
✅ UL & TITLE 24 - We uphold the highest standards for all our products by testing each product for optimal performance and safety. Our new construction housing are compliant with Title 24 energy efficiency standards.
✅ SIMPLE INSTALL - Follow our easy instruction guide for a fast and secure setup! Sunco's direct wire new construction cans with junction box are installed to the framing with the bar hangers (prior to drywall). TP24 connector included.
✅ AIR TIGHT & IC RATED - Sunco's new construction cans are airtight and thermally protected and designed to be installed in the ceiling surrounded by insulation. Sunco's cans won't overheat and cause a fire in the roof or overhead joist space. Airtight design keeps air conditioning or heating from leaking out of the home through the housing.
✅ SUNCO BENEFITS - 10-Year Warranty! Sunco is proudly based in the USA, offering quality products at affordable prices backed by industry-leading warranties and knowledgeable support specialists.
Top Rated 4 Inch New Construction Can
$234
With the leading edge of the bracket fitting snugly between the sheetrock and ceiling joists, these brand-new construction lights mounted in my existing ceiling without any problems. It was challenging to install the cans and lights 18 inches from the exterior wall since the area was so narrow and I was unable to swing a hammer. This was not due to the cans or lights. It was easy to install physically and electrically. Metal legs appear frail, but once the cans were secured, they stayed in place. IC rating is great. I'm unsure of the attic's airtightness because I believe I can see light entering from the living area. However, some talks suggest that heat from lights could be a concern. How much heat do 7 watt LEDs send out? According to comments made here by the creator, foam next to them is fine. I've had no buzzing or dimming issues, although the lutron caseta dimmer (available on Amazon) and apple homekit/Siri are more dependent on the LEDs than the can. Even though other double wall cans might be more airtight, I would still suggest this particular brand.
4.6/5
High-efficiency Lightness: Energy Star certified slim light, only consume 12 watts, provide 850lm brightness which equals to a 100W halogen lamp, saving $4182 per set in its 36,000 hrs lifespan; frosted LED lens, anti-glare and scratch resistant
Space-saving Solution: This low profile sliver LED recessed ceiling light, high brightness. Only requires 2 inches clearance of ceiling space, perfect solution for your narrow ceiling that doesn’t fit for a can
Widely Application: 5%-100% smooth dimming, compatible with most dimmers, this bright light can illuminate various applications such as closets, kitchens, hallways, doorways, basement and so on
Reliable Safety: ETL-listed safety standards, the aluminum light guarantees corrosion protection and rust prevention, and the sponge gasket effectively improves the sealing performance, which is a perfect light that you must have for your roof and ceiling
Simple Installation: Connect the provided J-box to the light using male/female cable and use spring clip to fix it on the ceiling, hassle-free, install in seconds. Recessed can is no longer a limitation for your choice. This IC rated light is permitted to be in contact with insulations in ceilings
$234
Almost all of the components you need to install these lights are included. Wire connectors, a junction box, and screws. Because the box is made of metal and has sharp edges where the wire enters, it does not come with the push-in cable connectors that are needed by law. (See image) To make sure the connectors you buy fit, I'd advise taking the box to the blue or orange retailer. Online purchases might not fit well. You can see why this one didn't fit by reading my review of it: https://www.amazon.com/gp/product/B00422M1XG/ref=oh aui detailpage o06 s00?ie=UTF8
4.6/5
Simple Installation: Connect the provided J-box to the light using male/female cable and use spring clip to fix it on the ceiling, hassle-free, install in seconds. Recessed can is no longer a limitation for your choice. This IC rated light is permitted to be in contact with insulations in ceilings
Space-saving Solution: This low profile sliver LED recessed ceiling light, high brightness. Only requires 2 inches clearance of ceiling space, perfect solution for your narrow ceiling that doesn’t fit for a can
High-efficiency Lightness: Energy Star certified slim light, only consume 12 watts, provide 850lm brightness which equals to a 100W halogen lamp, saving $2091 per set in its 36,000 hrs lifespan; frosted LED lens, anti-glare and scratch resistant
Widely Application: 5%-100% smooth dimming, compatible with most dimmers, this bright light can illuminate various applications such as closets, kitchens, hallways, doorways, basement and so on
Reliable Safety: ETL-listed safety standards, the aluminum light guarantees corrosion protection and rust prevention, and the sponge gasket effectively improves the sealing performance, which is a perfect light that you must have for your roof and ceiling
$234
Almost all of the components you need to install these lights are included. Wire connectors, a junction box, and screws. Because the box is made of metal and has sharp edges where the wire enters, it does not come with the push-in cable connectors that are needed by law. (See image) To make sure the connectors you buy fit, I'd advise taking the box to the blue or orange retailer. Online purchases might not fit well. You can see why this one didn't fit by reading my review of it: https://www.amazon.com/gp/product/B00422M1XG/ref=oh aui detailpage o06 s00?ie=UTF8
4.6/5
EXTREMELY BRIGHT DIMMABLE LEDs use 9.6 watts to provide 675 lumens with an 80 CRI, almost 70 lumens per watt. Dims down to 10% and compatible with select Lutron, Levitron, Synergy and Sensor Switch dimmers
SAVES MONEY AND TIME changing bulbs - Energy Star rating provides high light output with minimal power usage and will last 36,000 hours or +16 years when on every day for 6 hours/day
ULTRA THIN LED design only requires a 4.2 inch ceiling hole and 2 inches of ceiling space are needed to fit LED wafer recessed light and UL recognized driver
EASY AND SAFE INSTALLATION - innovative, slim design allows for easy retrofit, remodel or new construction installation from below the ceiling. Only need 2" clearance for install
HIGHLY RATED FOR MULTIPLE LOCATIONS - CSA, IC, Airtight and Wet Location listed make LED Wafer ideal for indoor and outdoor residential, hospitality, commercial and multifamily applications and safe to contact insulation
$234
Okay, so I initially purchased the 3500 Lumen model without realizing that I had selected the multipurpose model rather than the residential model. Since there are six lights, a dimmer was not intended because of how bright the lights are. but after seeing brightness I decided to get a dimmer switch. The big issue is the the multi purpose lights have an extra grey and purple wire that attached to a seperate dimmer switch. Since this was remodel not a new build, I decided to just buy new 6 residential 3000 version which I believe works with a regular dimmer since the grey and purple wires are not included. The 3000 Lumen is better and not as bright. Seems the higher 3500 version was putting too much strain on my eyes. The 3500 Lumen version with the proper box will allow them to be dimmed and adjusted in the other rooms because I planned to add lights to my living and dining rooms.CON: 1- The main issue I see is that these wafer lights are not sold seperately without the junction box. So if these ever burn out or malfunction you have to buy a new entire unit. I'm hoping they'll start selling the light fixture part separately as these become more popular.2. The junction box is small and somewhat constrictive when wiring.PRO: your need minimal space to slide the junction box and the waffer light. ideal for basements or locations with limited overhead space.The connectors inside the box function flawlessly.
Most recessed lighting these days is low voltage, which means it doesn't require as much power to operate and is therefore safer to install. You can install low voltage recessed lights yourself, but if you're not comfortable doing so, it's always best to hire a professional electrician.
Recessed lighting can be a great addition to any home. But do you need housing for recessed lighting? Recessed lighting doesn't require any housing, so you don't need to worry about that. However, you will need to make sure that the area you're installing the lighting in is large enough to accommodate the light fixtures. If you're not sure whether or not you need housing for recessed lighting, ask an electrician or lighting specialist. They'll be able to help you figure out what you need to do to get the perfect lighting for your home.
Recessed lighting is a type of lighting fixture that is installed into a hollow opening in a ceiling. They are often used to provide accent lighting, task lighting, or general illumination in a room. Recessed lighting can add value to a house by providing a stylish and modern look that can make a home more appealing to potential buyers. Additionally, recessed lighting can be used to highlight certain features of a home, such as a painting or piece of art, which can also add value.
There are a few things you need to know before replacing your recessed lighting housing. First, you need to identify what type of housing you have. There are new construction, remodel, and IC (insulation contact) housings. New construction housings are used when the space between the framing members is greater than 3 inches. Remodel housings are used when the space between the framing members is 3 inches or less. IC housings are used when there is insulation present in the space around the housing. Once you know what type of housing you have, you need
If your recessed light spring clip is not working properly, you can try to repair it yourself. First, check to see if the spring clip is bent or damaged. If it is, you can try to straighten it out with a pair of pliers. If the spring clip is still not working properly, you can try to replace it with a new one.
There's no definitive answer to this question as it will depend on the size and layout of the room as well as the level of light you want to achieve. However, as a general rule of thumb, you should space your 6-inch recessed lights around 3 to 4 feet apart.
COPYRIGHT © 2019