4.4/5
Maintains superior performance on pavement and grass as well.
Includes grooved, ca-safe firm compound foam inserts that confirm to the tire’s reinforcing rib for added sidewall support and improved a
Super soft C3 compound delivers maximum gripping power for loose conditions –Dry and loamy, or wet and muddy.
Deep woods tires feature aggressive tread for the exceptional off road traction your RC Crawler demands.
Deep lugs are tough enough to plow through all kinds of rough, off road terrain.
$234
I'm quite happy that I chose these tires over the stock ones. mounted without problems on beadlock rims. I've used the foam that was provided, and so far I believe they will work well for me. Tires had a lot more traction than stock tires while ascending and firmly locked onto the terrain. The previous time I crawled in this area, there was a world of difference. The purchase is well worth the price, which is very reasonable. They held the rock even when the tread had dirt in it and had much better grip in the mud and muck. When muddy, they also clean up well. improved traction on tree roots, loose dirt, and dirt inclines. They will hit on a compressed turn and you will hear a little popping as the lugs contact the plastic tray. Slightly larger than stock, I may do a little trimming on the truck. Only once the shocks have completely crushed. Deep Forest after being placed on bead locks, it was 123mm tall by 46mm broad, or 4.84" by 1.81". The AT KO's were 117 x 42mm (4.60"x1.65"), for comparison's sake. Compared to the stock, this rubber feels considerably softer to me. The tiniest leather punch I have worked perfectly to create holes between the tread on the opposite side of the tire where the beadlocks should have been vented. Very happy overall; we'll see how they hold up.
4.4/5
Tires are made of rubber, and wheel rims are made of plastic, perfect replacement for your kit
Suitable for 1/10 Scale Short Course Truck RC Car.
Pair of pre-assembled and glued wheels.It's mounted on rim with foam inserted.
High performance meet the challenges of any road conditions.
Tires Outer Diameter: 110mm/4.33in. Tire Width: 46mm/1.81in. Wheel outer diameter: 60mm/ 2.36in. Hexagon adapter: 12mm/0.47in. Offset: 1/2". Foam Inserts
$234
Very pleased with the tyres and rim combination. They were already adhered when they arrived, and they have endured many battery packs. I am using three batteries with a capacity of 5,500 mah, and there is barely any ballooning. The only obvious effects are a few tiny creases in the tread. I have used two sets of bearing carriers and a couple axles while mistreating these tyres over the past four months, yet they are still in excellent condition.
4.1/5
✔Tires OD 4.72" (120mm); ID 2.76" (70mm);Width:2.17" (55mm); Wheel Hub:12mm;Diameter of the Axle Hole :4mm
✔Note:The tires NOT Glued on rims,mounted on rims ONLY. Tires made of Quality Rubber,With Foam Insert,High wear-resistant and excellent durability
✔100% New,Genuine HobbyPark RC Products,Exquisite workmanship & Durable
✔Compatible with:Mostly Brands 1:10 Scale Off-Road Car,Monster Truck,Such as Redcat Volcano Epx /Pro,Volcano S30,Traxxas Stampede 1/10 2WD,Exceed RC Infinitive,ZD Thunder, HPI,HSP, etc.
✔Tire Material:Rubber; Wheel Rim Material : Quality Nylon Plastic (Standard Foam Inserts)
$234
These must be adhered; superglue is ideal for the majority of applications.Rims are made of a fragile plastic that cannot withstand brushless abuse or significant hits.I put this on my son's brushed 4x4 Rustler, and I have to admit that you can tell that they are not at all properly balanced. For him, it's alright, but if it were brushless, the bearings and stability might be severely damaged. If you want to find inexpensive replacements for your quick rig, I wouldn't recommend these. Big tyres on a battering truck are more like a cheap fix.
3.9/5
✔Compatible with:Mostly Brands 1:10 Scale Off-Road Car,Monster Truck,Such as Redcat Volcano Epx /Pro,Volcano S30,Traxxas Stampede 1/10 2WD,Exceed RC Infinitive,ZD Thunder, HPI,HSP, etc.
✔100% New,Genuine HobbyPark RC Products,Exquisite workmanship & Durable
✔Tire Material:Rubber; Wheel Rim Material : Quality Nylon Plastic (Standard Foam Inserts)
✔Note:The tires NOT Glued on rims,mounted on rims ONLY. Tires made of Quality Rubber,With Foam Insert,High wear-resistant and excellent durability
✔Tires OD 4.92" (125mm); ID 2.76" (70mm);Width:2.56" (65mm) Wheel Hub:12mm;Diameter of the Axle Hole :4mm
$234
For the price, these tyres are excellent. They are not as durable or as nice as name brand tyres, but you get what you pay for. These fit the void wonderfully if you're searching for a size and quality increase from the factory tyres for a low-end RC car. When my Traxxas Rustler VXL had a poor landing, I did shatter one of these tyres. It jumped about 6-7 feet, then descended and came to rest on one wheel. I was able to hotglue the wheel back together, and so far the repair is holding (I jump my Rustler regularly). Durability is not a problem if the car lands smoothly.
3.5/5
RC 1:10 On Road Car Tire & Wheel
Pentagram Plastic Wheel Rims
RC High Grip Rubber Tires
$234
The item is just as stated. If you look closely, all of the images of the tires that seem to be the right size are of 1/10-scale buggies, which is what these products are touted as. They're not too bad, these tires. Five stars for the basher tires, which are rather flexible and soft, undoubtedly not made of hard plastic, and unquestionably worth buying. Compared to pins, which deteriorate quickly, lugs are wider. Finding 4WD buggy basher tires has proven to be difficult because all I can find are race-related tires, neither of which fit my needs—they have shallow tread or pins. The tires are excellent, however because the foams are open cell, two of them tore when I removed them from the tires to remove oil before gluing. I have excellent closed cell foams on hand. These are not at all disappointing, and I will definitely buy extras just in case they run out. If you want nice tires at a good price, don't hesitate to buy; just be careful of the foams.
3.5/5
Hexagon adapter:12mm (Included)
Material: Tires->Rubber; Wheel Rim->Quality Plastic (Note:Not Glued,Include foam inserts)
Compatible with: 1/10 Scale Off Road Buggy,such as Redcat, HPI,HSP,ExceedRC,etc. Does not fit 1/10th Scale Traxxas Rustler
Width: 1.34'' /34mm (Front);1.65''/42mm (Rear)
Diameter:3.35''/85mm (Front/Rear)
$234
My RC10 required new tyres (circa 1988). Since my fronts are generally in good shape, I've just utilised the rears. I purchased hex adapters, and these now function. Even so, I still need to use two washers to extend them far enough to avoid making contact with the RC10 rear shocks. I am in a unique scenario, so I cannot take away stars for that. They are effective in my circumstance.
2.9/5
Wheel Diameter: 52 mm /2.05"
Wheel Drive Hex: 12 mm/0.47"
It suitable for RC 1/10 climbing car, off-road vehicle and so on
Material: Plastic + Rubber
Outer Diameter: 95mm/3.74"
$234
I would have given it a 5 star if I could, but I'm building a trailer to be pulled by my scx10 build, and these tires are a little smaller than the stock scx 10 wheels. I'll be putting my axial bomber on the trailer, and I wanted it to have a more off-road-ready stance sitting a little higher for more clearance, rather than using a smaller, more scale tire. I would not suggest these wheels for a true crawler because the rims appear cheap, but just being dragged behind anything Perfect I'll upload pics of the trailer after it is finished! These tires and wheels will work great for what I need!
COPYRIGHT © 2019