4.5/5
SMALL & LIGHT Weights Only 7 Grams & Is 30x13x3mm
EASILY Turn Lights, Smoke System, Bomb Drops, Plane Canopies On Or Off From Your Remote. Works Great With Our Light Bars
PERFECT For RC Cars, Trucks, Planes, Helicopters & Drones
WORKS With Any Spare Channel
SUPER SIMPLE Install Just Plugs Inline With The Item You Would Like To Control, No Setup Required. Just Make Sure In Your Radio The Throw For The Channel You Would Like To Control Is Set To +/- 100%
$234
You need Adobe Flash Player to view this video.Download Flash Player.fantastic stuff Actually, my Redcat Gen8 Scout II has two of these installed. I use them to control various lighting systems. I own a 6ch RadioLink RC6GS. enables me to control the lights with the switches' additional channels.
4.4/5
Universal model, easy to install. With switch, the middle lamp can be controllable, aperture was always Lights. Fits most 1/10 RC crawler cars and trucks.
Aperture light uniformity, full lights emitting. A group of two servos two lamp cord plug (can be plugged directly into the receiver BATT jack)
2 lighting options. Lighting switch. Pre-Wired. 4.2v-6v input.
Middle Light Diameter: 5mm. Outer diameter: about 10mm. Cord length: about 50cm
Remote control model car, Universal headlights, headlight conversion DIY toy car. Bright LED light output. Halo style bulb. Bright colors.
$234
These lights are excellent. On the hard body of my Jeep, I chose the 17mm. They offer a beautiful effect, and I used hot glue to attach them. I'm going to acquire another pair for my gen 8 Redcat.
4.3/5
EASY INSTALL - Just Peel & Stick To The Inside Of The Body
210mm Long
BUILT IN On/Off Switch
GREAT On Drift Cars
9V - Powered From A Standard 9V Battery
$234
They appear good. They don't, however, stick by a long shot. Get some gorilla glue, make a promise not to beat the living daylights out of the shell you're flying them to, and then start supergluing them to the shell two inches at a time. I also attached the 9-volt battery to the shell using electrical tape, and I mounted the battery. Get some quality Velcro, and you may place the batteries in the GP Toys S911 truck's roof part for a neat construction.
4.2/5
Material: durable hard plastic and metal.
LED size: 5mm (white LED), and 3mm (red LED).
Suitable for all kinds of RC car truck tank.
Directly powered by the receiver, for convenient to operate.
Including 4pcs LEDs: 2pcs white LEDs + 2pcs red LEDs.
$234
All I can say is wow! I bought these to try out on my Exceed RC drift car. They are incredibly bright and very simple to install. The only drawback is that they crack when you collide with curbs while driving on them.
4.2/5
Metal lampshade
Fit RC Model Car
$234
Great results! They are holding up despite the amount of rolling and crashing I do in my Traxxas Slash, which surprised me. It looks amazing, and you can now drive at night with superb visibility. Note: I installed the lights in flat aluminium bars that I purchased from Home Depot, then I mounted the bars on the frame of the car in a protected spot. I did not install the lights in the body. Additionally, I connected a little extension lead to the ESC so that I could unhook them at will. I simply leave them on always, and I don't see a change in battery life. Definitely would purchase again.
4.2/5
Suitable for all kinds of RC car truck tank.
LED size: 5mm (white LED), 5mm (red LED)
For sale is high quality 8-LEDs RC LED Light Kit.
Directly powered by the receiver, for convenient to operate
Includes 8pcs LEDs: 4pcs White LEDs + 4pcs Red LEDs
$234
These lights are essential for everyone who uses a hexacopter. These lights are incredible; they are very bright and don't drain batteries very much. When we fly this at dusk, passing automobiles will stop and just stare at it, wondering what is in the air. As we simply float in the air, we have watched as people pull over and begin shooting shots and selfies. They are excellent for taking off right before dusk. They appear brighter the darker it is.
4.2/5
Great fit on the Traxxas Rustler, Rustler 4x4, Bandit, Nitro Rustler, Jato & More. Will work on many 1/10 Scale rock crawlers, trucks, stadium trucks, buggys
4.8V-6.0V Input - Can be powered through any spare channel in receiver, if a channel isn't available a Y-Harness (Apex RC Products #1031) can we used. If installed in a vehicle with a sealed receiver box we recommend using a 3" or 6" (Apex RC Products #1002 or #1006) to make taking the body on and off easier.
28 super bright led lights - great for running at night, or in poorly lit areas. Can be mounted on the roof for a truck scale appearance, or on the hood to be better protected during rollovers. Includes 4 screws and bolts to securely mount the light bar to the body
70mm Long - Mounting at 59mm or 74mm with the mounting feet facing in or out (see last picture) Please measure where you plan on mounting it to make sure it will fit
With the use of our #9025 (ASIN B07BKSGW3D) electronic switch the light bar can be turned on & off remote via the remote (spare channel required)
$234
This light's design is nice, the LEDs are rather bright, and it fits my TRX4's front bumper perfectly. The fact that it isn't waterproof and will require some glue to fix, that the leads need to be resoldered to the PCB in order for both side panels to fit flush, and that the feet are a touch big don't take away from how much I appreciate the light.If it was waterproof right out of the bag, I'd give it five stars.
4.1/5
Works On Almost Any RC Car - Traxxas HPI Tamiya Losi & More
4 SUPER BRIGHT LED Lights with Silver Bezels
Simple to install! Just PLUG-AND-PLAY!
Input Voltage: 4.8v - 6.0v (normal 4 or 5 cell battery receiver voltage)
Power comes from the receiver - NO SEPARATE BATTERY REQUIRED!
$234
Purchased this together with a bar light across the top for my Gen 7 crawler. They are quite intelligent. Additionally, I bought servo "Y" connectors so I could run all the lights simultaneously. which are Apex RC Products #1031, 3 PACK - 6" / 150mm JR / Spektrum / Hitec Style Servo Y Harness. on Amazon.com. I'm using 3000mh batteries, and it didn't completely drain them before the lights went out. It took around 10 to 15 minutes to install. I drilled holes and placed them on the body where the headlights go. gives my run cam a lot of light. Very pleased with the purchase.
4/5
QUANTITY: 20 pairs of JST plug connector with cable wire (10 pieces 100 mm female, 10 pieces 100 mm male, 10 pieces 150 mm male, 10 pieces 150 mm female), enough for use
WIDE RANGE OF USES: these JST plug connectors are suitable for most mini RC helicopter, LED strip light and good for connecting motor, ESC battery, etc.
JST PLUG CONNECTOR CABLE: 22 AWG in type; The cable wire has 2 different length with male and female connector, approx. 100 mm/ 4 inches and 150 mm/ 6 inches
2 PIN JST CONNECTOR: one side is for plugging the other side for welding, male connector match well with female connector, easy to install and use
PLUG CONNECTOR: these JST plug connectors in red and black color, with PVC insulation, good little connectors for DIY electronics projects
$234
Made battery converter cables suit my small UDI 4 port charger perfectly. Also good and thick is the wire. maybe silicone If not, it isn't particularly thin and feels more like rubber than pvc. These have a good, robust feel to everything about them. Will repurchase!
3.6/5
This FPV race wire is the perfect upgrade for your racing or freestyle rig
RGB led adopts 10 pieces of 3535 lamp bead ,it can program Multi-colors by Flight Controller
Race wire FPV is designed with 2oz copper and a 2 layer board, it liberates you from extra soldering RGB LED strips job, which is perfect for frames with slim arms
Bottom PDB separated from the top LED and works independently, the bottom PDB can withstand 40A continuous current, replaced a section of motor cable for quick and easy installation
The overall size is 45 x 8 x 4mm, suitable for most RC FPV Quadcopte
$234
incredibly bright a good technique to keep your wiring safe. Take some juice out. Don't pass these through your flight controller, please. I used a led pdb that is powered by lipo voltage to power them. have suffered several prop blows. Purchase some 3/4-clear heat shrink to match them. Due to the LED programming constraint in Betaflight, I ran to in series and two in parallel and set up a cool scan effect.
COPYRIGHT © 2019
