4.8/5
No Load Running Speed: 0.09±0.01 sec/60° at 4.8V Rotary Angle: 120°
Application Fields: remote control helicopters, micro robot, robot arm and boats. ALL kind of R/C Toys and Arduino experiments
Stall Torque (4.8V): 17.5oz /in (1kg/cm).Dead band width: 7usec
Amplifier type:Analog controller Operating voltage: 4.8V～6.0V
Interface Type: compatible with JR & Futaba interface.
$234
My servos arrived in the mail eventually after some problems with USPS. The servo has three arms and attaching screws, as seen in the picture. I'd want to see a very simple wiring diagram, for example. I had the wiring correct intuitively, but customer support confirmed it. For novices, it would be nice.I wanted to test the five servos using Arduino's sweep example software. All passed tests and were functional. Note that although it is stated in the description that the arm will rotate 120 degrees, the sweep program only rotates the arm about 170 degrees. With plastic gears, they work excellent for the RC cars, planes, and drones for which they are touted.Let's observe how they respond under pressure. I hung a bag containing five quarters (approximately 1 ounce) from the servo's larger arm. For 24 hours, I ran the sweep software, and everything went smoothly. I increased the weight to 15 quarters (3 oz) and ran the exercise for a full day. No problems.I was interested in where it fell short. When I applied 8 oz. (12 pound), it swept 170 degrees. It swept at roughly 120 degrees at 12 oz. (or 3/4 pound). It swept the 170 degrees at 16 oz. (1 pound), but it was having trouble.Overall, these fantastic small servos should be able to handle the most of your demands. For the money, they do amazing work. Although there are servos with more torque available, these are the best for RC use.
4.7/5
Operating voltage: 4.8-6V
Operating speed: 0.1second/ 60degree ( 4.8V no load)
Application: Used for fixed-wing, helicopter, KT, glider, small robot, robotic arm and other models.
Small size and light weight.
High quality and high cost performance.
$234
I bought these to use in a little sailplane (an old school hand launch re-tasked as a lightweight thermal glider). They appear to be a bit higher quality and faster reacting than the normal cheap hobby shop servo, and they seem to function about as well as vintage servos like the Hitec HS80 (but still a lot cheaper).
4.6/5
Aluminum case, metal gears, high Torque
Genuine Redcat Racing Replacement part Rer11857
For troubleshooting and Warranty information please contact a Redcat Racing customer service specialist
Quantity 2 Hexfly 25kg waterproof servos with included Aluminum servo horn
Hexfly is a Redcat Racing brand
$234
This 25 kilogram servo is exactly what I needed—a powerful, reliable servo. I have them mounted on a Redcat Valcano Exp Pro, which has the power to turn in any direction. The modification wasn't at all difficult. I'd buy one once more.Additionally, I bought one for my Redcat Caldera 1/10 on the dirt track, which slides into the bend easily under control.
4.6/5
Packing List: 2 X DS3218MG Digital Servo, 2 X 25T Servo Horn, 2 X Screws & Accessories. 3 Years Warranty Time and Life Limited Friendly Customer Service. Any Question, please click “Miuezuth†to contact us. Thank you.
Please Note: The servo has a pulse width signal of 500 to 2500 μsec; when the input signal is 500usec, the angle is 0 degrees, and at 2500 μsec, the angle is 270 degrees.
This steering standard servo is stable and quick response time, strong, advanced linearity, accuracy with precision potentiometers, stable, low noise and waterproof. It is perfect for rc car and boat. This servo is suitable for all 1:8 - 1:12 RC Truck. Suitable for traxxas rustler / ARRMA Nero 1/8 scale monster truck / traxxas trx4 sport / Arduino.
High-precision metal gears with hard anodizing, CNC aluminum middle Shell. High torque steering servo for robot arm, boats, vehicles and remote control toys.
270 degree rotation well-controlled, 360 degree rotation when power-off, perfect for robot joint activities. Waterproof performance: IP66
$234
These servos are incredible. I bought these for my summit and have a Reefs 555 in my axial. They are incredibly strong, silent, and torquey. The servo saver needed to be strengthened because it was turning both the wheels and it. It makes my 40 series mudslingers appear to be nonexistent. Slower but with fairly wide corners. End points must be determined. Will repurchase for any basher I possess.
4.5/5
✔New Model:DS3225MG 25kg Servos.More torque,higher speed
✔Best for your DIY Project:compatible with 1/8 and 1/10 scale crawler,truck,buggy,robotic arm,and any application where standard servos are used
✔Equipped with high precision potentiometers and high-resolution digital chip,ensure stable performance, fast response, strong anti-interference ability,low noise,fast heat dissipation
✔Power cord is longer up to 17.7inches(45cm),and also send with a 25T adjustable metal servo arm
✔Dimensions:1.57 x 0.78 x 1.59in (40 x 20 x 40.5 mm); Weight:2.64oz (75g)
$234
The fact that this gear train is made entirely of metal shocked me. I had the impression that the cover might be made of plastic. There is a lot of grease covering every gear. The solder joints appear clean and expertly finished. Although it might just be a covering, the housing seems to be made of aluminum. People that fly in the dirt have gaskets on the plastic top and bottom. The servo arm has holes at 20 and 25 mm and is a typical surface kind. Only drawback is the lack of grommets or eyelets.
4.3/5
â–¶Upgraded Version - advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof
â–¶Dimensions - 1.58x0.79x1.60inch (40x20x40.5mm);Weight: 60g (2.12oz) only
â–¶Large Torque - maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V
â–¶High Rotation - well-controlled, 270 degree rotation. 360 degree rotation when power-off, perfect for robot joint activities
â–¶High Quality - equipped with strong copper & aluminum gears,CNC aluminium middle Shell
$234
To replace a weak 6kg servo, I purchased this 20kg digital servo for my 1/10 GMade R1 rock crawler.Under any kind of weight, I could not turn the wheels with the 6kg, and I was frequently knocked off balance.That was all resolved by this 20 kilogram servo. I can now position the tires where I want them since I have more strength.I am aware that I have not yet utilized this servo's full capability because my ESC only has a 3 amp BEC. I'm sure I'll be impressed once again if you pair it with a powerful 10 amp SBEC.I think the 20 kg servo can withstand some damage because it is big and sturdy. Everyone appears content with this Power House budget servo from the vids I've watched.I would suggest this one if you need an inexpensive upgrade.
4.3/5
â–¶Dimensions:1.57 x 0.78 x 1.59in (40 x 20 x 40.5 mm); Weight:2.64oz (75g)
â–¶Best for your DIY Project:compatible with 1/8 and 1/10 scale crawler,truck,buggy,robotic arm,and any application where standard servos are used
â–¶Equipped with high precision potentiometers and high-resolution digital chip, ensure stable performance, fast response, strong anti-interference ability,low noise, fast heat dissipation
â–¶Power cord is longer up to 15.75inches(40cm),and also send with a 25T adjustable metal servo arm
â–¶New Model: DS3225MG More torque higher speed
$234
First off, this is a fantastic thing. Quite inexpensive when compared to the competition. Significantly better steering control and feel. The servo has to be mounted differently than usual in order for the horn to fit. FLM upper deck fitting is flawless. The stock upper deck seems to be too lengthy for the horn. Make sure to purchase this as well to prevent brownouts.Spektrum Voltage Protector (asin: B000BOVMHK; reference: cm sw r fm apa I WuTICb3MRD3GP)
4.2/5
DS3218 20kg digital servo,accuracy with precision potentiometers, high quality leads and center nicely.
High torque steering servo for robot arm,boats,vehicles and remote control toys.
Size:40*20*40.5mm Weight: 60g Operating voltage range(4.8-6.8V) Dead band width:3 μsec
Stall torque (at locked):18 kg-cm(5V)/21.5 kg-cm(6.8V) Waterproof performance: IP66
Please Note: The servo has a pulse width signal of 500 to 2500 μsec; when the input signal is 500usec, the angle is 0 degrees, and at 2500 μsec, the angle is 270 degrees.
$234
For the price, these servos are a pretty nice buy. They are somewhat delicate because of their identical construction to other inexpensive 9 gram servos. Just something to be aware of. They perform admirably for little RC planes.Sadly, I discovered that one did not operate correctly out of the box. When first running, it made a clicking noise before locking up. If you connect the servo in right now, it becomes quite hot. The broken servo and a functional servo are both displayed in the accompanying video. Unhappy that only 9 out of 10 functions.Update: To repair the damaged servo, Miuzei has sent me a fresh box. I value their prompt and friendly customer service and their willingness to resolve any concerns that may arise.
4.2/5
Compliant with most standard receiver connector: Futaba, Hitec, Sanwa, GWS etc...
Gear Type: All Metal Gears. Controllable angle range from 0 to 180 degrees, excellent linearity, precision control. Can be rotated within 360 degrees when power off.
This high-speed standard servo motor can rotate 180 degrees (90 in each direction).
Stall torque: 12kg/cm(6V), 13kg/cm(7.2V). Dimension: 40.7*19.7*42.9mm(1.6*0.78*1.69inch).
Stable and shock proof double coreless motor, metal gear, ball bearing design,Through external adapter, connector wire length 300mm.
$234
Works perfectly. Metal gears are a pretty cool and economical product. In terms of speed and strength, Servo is rather good. Included are screw fastenings, rubber dampers, and various plastic arms. This complete frame servo is a really cool device that is appropriate for vehicles at a 1:10 size. I may suggest the NP ZD racing 9102 buggy. I advise angle work that is satisfactorily complete and about 90 degrees for the pictures.
4.1/5
Aluminium Case. Enhance the heat dissipation, ensure that servo motor can work well
270 degree rotation. Controllable angle range from 0 to 270 degrees, Excellent linearity, precision control. Can be rotated within 360 degrees when power off
Using high-precision potentiometer with new design. Accuracy and linearity have been greatly improved! Accurate movement can satisfy the needs of making robots.
Full metal gear. it's better for accuracy, service life has been greatly increased
20kg large torque. 20 kg·cm (277.6 oz·in) @ 6.6V. Dimension: 40*20*40.5mm(1.57*0.78*1.59inch)
$234
On my 1/10 rock crawler with weighted 2.2 wheels, I have 2 of these (1 steering the front axle and 1 steering the back axle).Considering that they cost less than $20 each, their 6.6v power is amazing. Both of mine have given immaculate performances and have perfect centers. I use aluminum horns without a servo saver, and I can attest that they have been severely damaged. It is essential that you set your endpoints precisely because these servos have a 270° range of motion in order to prevent the servo motor from overheating.
COPYRIGHT © 2019
