Best Projector Mounts in 2022

Last update: November 21, 2022

Are all projector mounts the same?

Can drywall hold a projector?

Drywall is a common material used in construction and is often used to hold a projector. While drywall can hold a projector, it is important to note that the weight of the projector may cause the drywall to sag over time. It is also important to make sure that the projector is properly secured to the drywall so that it does not fall and cause damage to the projector or the drywall.

Can you have a projector off center?

Yes, you can have a projector off center, but it will cause the image to be distorted. The further off center the projector is, the more distorted the image will be.

Can you mount a projector upside down?


The All-in Wonder Mount by Mount Genie: The Easiest Wall Mount for All Components Routers Modems Xbox Playstation DVRs | One Size Fits All | Designed for Home and Business (Black) Review:


I've had Hideit component mounts for all of my TVs for at least ten years and am satisfied with every purchase. I looked through my old Hideit Mounts when we finished the room above the garage for my son and realized there wasn't one that truly fit, so I assumed I would be purchasing another. Due to its universality and low price, I found onto this mount and decided to order it. I may never use my $100 worth of Hideit mounts again, which is a drag. The Velcro straps make it simpler to remove the Wii for travel using this mount, which performs admirably. Two or even four drywall screws seemed like excessive, so I only used one, and it's sturdy. The layout is logical and clearly thought out. I'm not concerned about heat because it presumably has better airflow than sitting on a table. Some of the more recent Hideits conceal the mount section more effectively, but they are only made to be used with one component, which is something I wanted to avoid. I'm thrilled with this mount and adore the style.



VIVO Universal Adjustable White Ceiling Projector | Projection Mount Extending Arms Mounting Bracket (MOUNT-VP01W) Review:


The instructions are a little ambiguous, but once I found the optimum place for my projector, installation was simple and uncomplicated because there is nothing complicated about this mount. The projector attachment legs may move in any direction, and the kit comes with different sizes of screws as well as washers, so adjusting the mount match your specific projector is not difficult. Adjustments are obvious while looking at the mount.The mount has a beautiful overall appearance thanks to its white powder coating and zinc-plated bolts. If they included any kind of coverings to conceal the lag bolts that are utilized in my installation to fasten the mount to the ceiling, that would be helpful. In my situation, I used two lag bolts that screwed into the truss's wood and through the drywall. Each lag bolt had a pilot hole bored for it after I measured, marked, and screwed it in firmly. It is quite durable.The majority of the mount's joints are equipped with nylon washers, allowing you to modify the mount by simply loosening the allen cap screws and then tightening them again to secure everything in place. It is straightforward but surprisingly effective.Although the mount hangs the projector a little bit lower to the ceiling than I would have preferred, it still looks good.I have a fantastic time viewing movies with my Benq HT2050 projector, which shines 11 feet to a motorized 120-inch Monoprice screen.



VIVO Universal Adjustable Black Ceiling Projector | Projection Mount Extending Arms (MOUNT-VP01B) Review:


The instructions are a little ambiguous, but once I found the optimum place for my projector, installation was simple and uncomplicated because there is nothing complicated about this mount. The projector attachment legs may move in any direction, and the kit comes with different sizes of screws as well as washers, so adjusting the mount match your specific projector is not difficult. Adjustments are obvious while looking at the mount.The mount has a beautiful overall appearance thanks to its white powder coating and zinc-plated bolts. If they included any kind of coverings to conceal the lag bolts that are utilized in my installation to fasten the mount to the ceiling, that would be helpful. In my situation, I used two lag bolts that screwed into the truss's wood and through the drywall. Each lag bolt had a pilot hole bored for it after I measured, marked, and screwed it in firmly. It is quite durable.The majority of the mount's joints are equipped with nylon washers, allowing you to modify the mount by simply loosening the allen cap screws and then tightening them again to secure everything in place. It is straightforward but surprisingly effective.Although the mount hangs the projector a little bit lower to the ceiling than I would have preferred, it still looks good.I have a fantastic time viewing movies with my Benq HT2050 projector, which shines 11 feet to a motorized 120-inch Monoprice screen.



DYNAVISTA Full Motion Universal Ceiling Projector Mount Bracket with Adjustable Height and Extendable Arms Rotating Swivel Mount for Home and Office Projector (Black) Review:


excellent projector mount High quality finishing, along with very thorough instructions, make installation incredibly simple. My projector fits perfectly on the adjustable arms, which operate securely and safely.There are two things I want other persons installing your mount to keep in mind. Before attaching to the ceiling, finish all of the connecting first!! Second, completely tighten the screws!I installed twice during the process. When I first started, I simply linked all the screws without fully tightening them. I figured I could modify them once they were installed in the ceiling. As a result, even though I believe the screws on the ceiling are tightened, the projector is still shaky since it is too difficult and tiring to adjust them. Therefore, before installing them to the ceiling, I had to remove them and completely tighten all of the screws. Everything went smoothly the second time around; after tightening up all the screws, the base, the extension pipe, and the bottom are all strong and operate flawlessly.I've described my installation experience above in the hopes that by doing so I might help you and save you time.Overall, this projector is quite durable, versatile, and composed of high-quality materials. I'll suggest it to my friends.



Universal Laptop Projector Tripod Stand - Computer, Book, DJ Equipment Holder Mount Height Adjustable Up to 35 Inches w/ 14'' x 11'' Plate Size - Perfect for Stage or Studio Use - PylePro PLPTS2 Review:


I forwarded the same recommendations to the product's producer and developers. :1. A stand made of aluminum or carbon fiber rather than steel would be lighter.2. It is simple to put together, but you must remove all screws in order to remove the top tray, and if you move the stand about a lot, you risk losing screws. It would be simpler to disassemble by simply loosing the screws rather than completely removing them if at least one (horizontal) side of the "T" bar had a "sliding pipe insert" (comparable to a bathroom shower curtain bar) that could be manually moved in and out and secured with a screw or with an inner spring (this way the "O" rings could stay attached to the plastic tray when travel).3. The plastic tray is quite slick! I use this stand to hold small monitors and video switching equipment since I cannot risk dropping them. I've already bought excellent self-sticking rubber/silicon anti-slip pads from Amazon. A manufacturer might sell self-sticking, non-slip pads comparable to these.In any case, this is a fantastic product.



VIVO Universal Extending White Ceiling Projector Mount | Height Adjustable Projection (MOUNT-VP02W) Review:


This mount looks and performs great on my Optoma HD141x, so I got it! Since I don't have a ceiling stud where the mounting site is, the provided wall anchors worked just fine throughout assembly. Unfortunately, one of the screw holes was stripped, making it impossible to properly tighten the set screw. The mount is nevertheless strong, and I was able to quickly line the projected image to my screen because most set screws are installed in pairs.My only issue, if I were to voice one, would be that the mount is a touch too tall for my setup after I installed it. Since the minimum length of the extension rod is explicitly mentioned and I am aware that I erred in measuring, I will not be deducting points for this. To allow me to choose not to utilize the extension rod at all, it would be excellent if they provided the basic topmost joint from the VP01 model in this kit.The mounting feet for my projector are shown in the photographs that are provided. One of the mount's feet needs to be taken out because the HD141x has three mount holes. To position the base plate over the projector's "do not throw away" image of a trash can, the other 3 attach as shown in the pictures. (If you own this projector, you'll understand what I mean) The projector's mount holes fit the mounting feet EXACTLY.



Cheetah Mounts APMEB Universal Projector Ceiling Mount Includes a 27" Adjustable Extension Pole and a Twisted Veins 15' HDMI Cable Review:


decent mount, but it could be better. I anticipated a little larger range when I read 6-27 inches. You can perform 6", but the following level will have you performing 16". I purchased this for my Epson 2040 projector, which needed some adjustment. There are only three holes in the 2040, and the third one is so near to the others that I had to adjust the third arm to make it match. However, I was able to mount it to the ceiling, and it performed as promised.*** IMPORTANT *** If you don't mind having additional holes in your wall or ceiling, do not follow the directions exactly. The pre-drilled holes specify a 6mm bit but go on to state that a 3/8" bit will work if metric is not available. You will wind up with a hole larger than the bolt because the accompanying lag bolts are not even 3/8in. Only little smaller than the 6mm, I used a 15/64.Edit: This is how I've set up the arms. The back right arm can now glide even deeper in because the front left arm has been removed. The back left arm is then used by the front left hole to mount.Edit 2: A badly sketched image was reinserted to show the arms from above.———————Update: Cheetah called me after I posted my review to see if they could help in any way and to ask a few questions about my problems. They have requested that their manufacturer update the information by sending the section pertaining to bit sizes. They were also interested in how I managed to make the arms work with the Epson 2040, and it appears that they plan to modify it to make it more versatile. Overall, I was quite pleased with the company's outreach.



VANKYO Universal Mini Ceiling Projector Mount, Angle Adjustable Wall Ceiling Projector Mount with 360 Degrees Rotatable Heads, Compatible with Leisure 3 Review:


Installing this for the tiny projector I bought was simple. It appears to be strong and easily supported the projector's weight. The projector I bought to replace it had four mounting holes for ceiling mounting, and this mount wasn't compatible, so I ultimately opted to return it. If you have a little projector with a single mounting hole, I would recommend it because I was otherwise satisfied.



Mount-It! Wall or Ceiling Projector Mount with Universal LCD/DLP Mounting for Epson, Optoma, BenQ, Viewsonic Projectors, 44lb Load Capacity, Black (MI-604) Review:


With our BenQ MH530FHD projector, we utilize this mount. I did not have any of the weight difficulties that others mentioned because the projector is incredibly lightweight and just requires three mounting screws.When I first mounted it to the wall, I truly liked the design. Everything was secure after being tightened, and mounting went without a hitch. The project was only 2 feet too far away from our screen due to wall installation. For outdoor movies, I also needed to be able to quickly and easily take the projector down. Unscrewing three screws wouldn't be too tough, although a shelf would be preferable.It was simple to change to a vertical mount. I constructed a shelf, and the mount easily supports it even with the project on it. The vibrations it picks up from people walking upstairs are the only problem. With a vertical mount, though, I was prepared for this. The room above our entertainment area doesn't see much use when we are viewing movies, so the vibrations are tolerable.Simply put, I'm relieved that our projector is no longer perched atop a ladder's paint tray.



Universal Projector Mount Bracket Low Profile Multiple Adjustment Ceiling , Hold up to 30 lbs. (PM-002-WHT), White Review:


This projector is exactly what we needed to make our family theater room come to life! It attaches on the ceiling neatly and is elegant and uncomplicated. I'd look into changing your screen if the reviews were criticizing the image. We invested in a real projector screen, and when the projector is properly configured, the image is quite clear. Since there aren't many modification options, it's simple to alter; nonetheless, once you discover the ideal setting, the picture is amazing. We are delighted with it and intend to connect a Roku for the children! Thanks. for quick, simple shipping!


Do projector mounts have to be in studs?

Most projector mounts need to be attached to studs in order to support the weight of the projector. The exception to this is if the mount has a built-in leveling system that can be adjusted to account for an uneven surface.

Does a projector need to be level with the screen?

No, a projector does not need to be level with the screen. You can have the projector slightly above or below the screen, as long as the image is still in focus.

How do you hang a projector renter friendly?

If you're looking for a projector that's renter friendly, you'll want to look for one that's easy to set up and take down. A good option is a projector that comes with a carrying case. This will make it easy to transport and store. Another option is a projector that has a built-in mount. This will allow you to easily hang the projector from a ceiling or wall.

How do you mount a projector on the ceiling without studs?

There are a few ways that you can mount a projector on the ceiling without studs. One way is to use a universal projector mount that has a variety of different attachment options. Another way is to use a specialized ceiling mount that is designed for use without studs.

How do you mount a projector without drilling?

There are a few ways that you can mount a projector without drilling. One way is to use a projector stand. This will allow you to place the projector on a table or other flat surface. Another way is to use a ceiling mount. This will allow you to suspend the projector from the ceiling. Finally, you can use a wall mount. This will allow you to attach the projector to the wall.

How far from the ceiling should I mount my projector?

There is no definitive answer to this question as it depends on a number of factors, such as the size of the room, the size of the screen, the type of projector, and so on. However, as a general rule of thumb, it is recommended that you mount your projector 10-15 feet from the ceiling.