4.7/5
Simple Plug and Play unit- no wiring or modifications needed can get the full power even when the belt is not buckled
After sale without worry, 2 years warranty-Installation videos and usage support included
TIPS: Just be careful about going too fast without the belt on even when your machine has popped the seat belt harness override clip bypass plug, Be sure to zip tie the new plug in a spot where it will not be hit by moving parts or seat sliders
Just need 1 Xislet seat belt harness for the driver's side and the override bypass will work great not having to plug in the seatbelt to bypass the shutdown mode
No need to have the belt fastened behind you all of the time when you constantly getting in and out
$234
Very simple to install, and it performs flawlessly.
4.7/5
◾ ⬛ No need to put on the seat belt every time when you constantly getting in and out
◾ ⬛ No longer have to plug seat belt in every time to turn off speed limiter
◾ ⬛ Simple plug and play to override the annoying safety feature,only takes a few seconds
◾ ⬛ Fitment for Polaris,Can-Am Models and other similar UTV Models
◾ ⬛ For the safety of you and others,pls use of a seat belt during the long ride
$234
When necessary, such as in a parking lot or out in the country where there are no safety concerns, a simple method to skip the seatbelt can be used. If the seatbelt is not fastened, some SXS ATVs CANNOT exceed 15 mph. If you opt not to use a seatbelt and wish to travel at every speed your SXS or ATV is capable of, this bypass is useful. Hope that was useful.
4.5/5
Easy Installation
Adjustable 4-channel RCA outputs that provide Line Level Matching
Isolated transformer inputs and outputs
System interface to replace factory installed receivers and integrate factory amplifiers
Adjustable 4-channel RCA outputs
For 1995 - 2002 Nissan vehicles with Bose audio system
System interface to replace factory installed receivers and integrate factory amplifiers
$234
In my 2004 Nissan Pathfinder with Bose speakers and an amp, I had a Metra wire harness adaptor, and the quality was terrible. For 6 speakers, there were only 4 outputs, and the harness split the audio in some way. It took turning the volume almost all the way up for anything to be audible due to the horrible sound quality. That was awful.I am overjoyed that I purchased this interface kit. Even though the directions weren't very clear, it was simple to install. Simply connect each cable to the proper color on your head unit, and everything will function as intended. I can now achieve the volume I had at maximum volume in less than a quarter after adding this kit. I'm overjoyed with this kit. The volume and sound quality have improved since I used my old head unit.My next move is to improve the sound overall by adding a tiny sub enclosure to the trunk or behind a seat.
4.2/5
MICTUNING MIC-B1001 wiring harness kit with on/off switch and easy to install
Great Construction:40A Power Relay and Inline Blade Fuse for multiple safety protection.With 2 lights output connections,it can hook with 2 led work light or 2 small watt led light bar and any else off road LEDs
CAUTIONs:We recommend professional installation,pls let professinal installer to wire the harness kit; If let the wire short circuit,the harness would melt and even caught a fire,We suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 180W, or it would got melt as well
10FT Extendable Wiring Harness:up to 10ft of wiring that is plenty of length to put it where you want
Details Makes Perfect:adopt flexible strand copper wire,up to 180 watt load capacity.It is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w
$234
This wiring harness is simple to install and use. I got the wrong wiring when I first started wiring some LED lights into my car before discovering the MicTuning MIC-B1001 2 lead. This harness works flawlessly and was simple to install. This concludes my thorough analysis of the various parts.APPEARANCEThe harness itself appears to have been packaged extremely carefully; it has a protective cover around most of the wires and appears to be free of kinks, splits, and broken pieces. Everything appears to be quite solid. The non-sleeved wiring I had wrapped in electrical tape around the fuse and relay after the installation was complete was the only item that worried me. Simple solution for mental calm. All of the connections between the lights and harness were also wrapped.FUNCTIONALITYThe harness performs admirably. The package includes sleeves for both connections as well as male end adapters for the red and black wires on the lights. My lights turned on immediately after I connected all of my wire to the battery. A hole in the relay allows it to be mounted to the engine compartment wall. Basically, wherever that is practical The only issue is that finding the ideal location for the relay was a little challenging because there isn't much cabling connecting the relay to the positive and negative terminals on the battery. I was able to fit it in just beneath the hood bumper and was fortunate to come upon an extra self-tapping screw to use as a fastener.WHAT YOU MAY WANT TO HAVE AVAILABLE*Use electrical tape or shrink wrap to cover any wiring you believe to be exposed.These excellent and incredibly simple self-cutting zip ties don't have any of the harsh edges you typically get from cuts that aren't flush. The harness can be fastened to the grill, frame, etc. with these.SUGGESTIONS FOR IMPROVEMENTlonger wiring from the battery to the relay wires. Overall, the shipping was prompt and the product performs as promised. Excellent harness at an excellent cost.
4/5
10FT Extendable Wiring Harness:up to 10ft of wiring that is plenty of length to put it where you want.
Great Construction:40A Power Relay & Inline Blade Fuse for multiple safety protection.With 2 lights output connections,it can hook with 2 led work light or 2 small watt led light bar and any else off road LEDs.
CAUTIONs:We recommend professional installation,pls let professinal installer to wire the harness kit; If let the wire short circuit,the harness would melt and even caught a fire,We suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 180W, or it would got melt as well.
Details Makes Perfect:adopt flexible strand copper wire,up to 180 watt load capacity.It is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w.
MICTUNING 03 Series wiring harness kit with 5 pin on/off rocker switch and easy to install.
$234
You need this if, like me, you tinker with your car's electrical accessories to prevent "voiding" the manufacturer's warranty by building your own harness system. I bought two take-down lights, and I wanted them to have a separate power source from my vehicle's harness. Typically, I just grab some wire, fuses, relays, and add-a-circuits. All of that is handled by this. Look at the contents; it's a complete system, barring any additional wire that you might need to splice in. With this, I finished the assignment so rapidly that I had to double-check my work for errors. For the price, there is no way to lose.
4/5
▶ PERFECT FIT RZR HARNESS PASS THROUGH BEZEL - Fit for 14-19 Polaris RZR XP 1000, 16-19 Polaris XP 1000 Turbo, 16-19 Polaris RZR 1000 S, 15-19 Polaris RZR 900/S/XC, 17-19 Polaris General
▶ DECORATE YOUR RZR - A beautiful custom design upgrades your RZR with a great new look,add special style and attitude to your RZR
▶ EASY INSTALLATION - Instructions included, and installation videos on YTB may help you.Allows for use of 4 or 5 Point Harnesses
▶ INCREASED SECURITY - Prevent harnesses from falling off a riders shoulder and allow harnesses to be placed lower down for better fitment. Take the focus off your harnesses and enjoy your ride.
▶ LIFETIME WARRANTY - Support return for undamaged,full non-defective products within 30 days after receipt of goods,satisfaction guaranteed
$234
Work and installation are accurate. This is a nice option if you're satisfied with your stock seats and desire harnesses. prevents shoulder straps from slipping sideways. On the front of the seat, you do end up cutting into some of the seam stitching, which could eventually cause further tearing. However, this could be fixed with some glue.
3.6/5
This is a complete electric start engine wiring harness loom,include 1x ATV Wire harness,1x CDI(5Pin AC),1x Solenoid Relay,1xRectifier (Voltage Regulator) ,1x Ignition Switch (2 keys, waterproof),1x Upgraded Multi-functional ATV Switch,1x Stator (Magneto Generator),1x Ignition Coil with lead and 1x Spark plug.Good value for money,easy for replacement.
Feel free to contact us by emails for solution if you have any problems.
Compatible with many brands,such as: Atomik, Pitpro, Hummer, Orion, Xmoto, Lei, DMX, SWD, TDR, DDR, Tommahawk, Monsoon, Grudge, Kazuma, Bull, Trooper, Hunter, Motox, Trojan, Blitz, Crusade, Link, Bigfoot, Kuda, Motoworks, Nitrous, Reign, Fury, Prox, Raider, Zongshen, Loncin, Ducar, Lifan, Thumpster, Thumbstar, Chongqing.
Note: 1）Please check the pictures carefully before buying, especially the pictures of Magneto Stator. 2) Please check the wiring diagram first before installation, and please consult or hire a mechanic to install this wiring harness if you are not sure about the wirings. False assembly may cause fire on the harness, though this occasion happens rarely.
Universal fitting: Fits almost all years Chinese made electric start upright engine 49cc 50cc 70cc 80cc 90cc 100cc 110cc 125cc engines. For ATV, Coolster, Quad Bike, Dirt Bike, Pit Bike, Go Kart, Kawasaki KLX, 4 Wheelers, Scooter, Buggy, Motowork, Dune, Taotao.
$234
I was astounded at how much was included for the price. replacement of the entire electrical system, including all parts. Everything could be changed out quickly and worked on the first try. Very happy!
3.5/5
100% New High quality and complete electrics all wiring harness wire loom assembly for GY6 125cc 150cc ATV / QUAD
Package includes:CDI, spark plug, ignition coil, solenoid relay, rectifier, ignition switch, ATV switch and magneto stator.
NOTE: this assembly does not fit 49cc 50cc 70cc 110cc 150cc 200cc 250cc 300cc Zongshen Lifan ATV / QUAD with different stator
Compatible : GY6 125cc 150cc ATV / QUAD with 6 coil stator
Fits almost all years Chinese made electric start upright engine GY6 125cc 150cc ATV / QUAD / Coolster / Go Kart / 4 wheelers / Scooter / buggy / Motowork & more
$234
With a new GY6 short case scooter engine, we used this to rewire a Yerf-Dog go-cart. The wiring from the past was a thorough hack job. This kit included the auto choke, push button ignition, key switch kill, safety brake, and headlights that we required to get the cart functioning. We did not connect several things, such as the taillights. We chopped and spliced the harness because it WAS NOT long enough for this specific purpose. We will purchase once more when we completely rebuild the next cart because we are confident that it will match our needs.
3.3/5
DO NOT FIT: GY6 motorbikes and other 200cc - 250cc Zongshen Lifan ATV / QUAD with different stator or CDI.
Universal fitting: fits almost all years Chinese made electric start upright engine 49cc 50cc 80cc 90cc 100cc 110cc 125cc ATV / QUAD / Dirt Bike / Kawasaki KLX / Coolster / Go Kart / 4 wheelers / Scooter / buggy / Motowork & more
High quality and complete electrics all wiring harness wire loom assembly for QUAD / ATV parts
The wires are made of all-copper, and the thickened copper is more durable and safe, ensuring high-performance start-up.
Please NOTE：Each of our products is packaged in a color box with the OTOHANS AUTOMOTIVE logo. The box also contains wiring diagrams and installation diagrams. Please look for it to be Sold by JINGKE and Fulfilled by Amazon before purchasing.
$234
worked for my atv from Redcat Racing. The photos do help, even though the wiring diagram is a little confusing. Although it is simple, it does require a little bit of wiring knowledge. Although I've seen complaints that the harness is too short for some atvs, the length was a simple swap for me. One problem was that the stator and harness connector was incompatible. The only component on mine that required modification was the harness, which featured spade connectors instead of the stator's bullet-style connectors. Other than that, I find it to be effective and exactly what I needed to restart my ATV. Repurchase if the need arises
COPYRIGHT © 2019
