4.9/5
You are backed by 2-Year warranty since purchase date, feel free to send email if there’s any issue, solution will be offered once details confirmed
Package includes 2 covers only, as shown in the first picture, no other part included; easy to install, loosen the screws, remove the old cover and screw the new one back on
Replace the orange/red factory flat pancake style turn signal light lens with these smoked covers, a popular way to customize the blinkers, the dark tinted caps add new features to the motorcycle in appearance and, meanwhile, maintain clear visibility without weakening the halogen or LED light
Compatible with Electra Glide (FLHS 1987-1993, FLHT 1986-2009, FLHTC 1986-2013, FLHTK 2010-2013); Fatboy FLSTF 1990-1994; Heritage Softail FLSTC 1988-2015; Road Glide (FLTR 1998-2002, FLTRI 1998-2003, FLHR 1994-2013, FLHRCI 1998-2006); Softail Springer FXSTS 1991 1992; Tour Glide FLTCU 1989-1996
Fit for all flat pancake style turn signal light housing with 3.2 inches diameter (approximately); check detailed compatibility above before ordering, DO NOT buy if diameter size does not fit or your bike is not listed
$234
On my 2002 Electra Glide, replacing the stock lenses with these was simple. One of the four lenses was slightly turned 180 degrees and no one except me would ever see that there was a tooling mark on the edge, which was not noticeable enough to merit exchange. I couldn't be more pleased after placing the amber LED lights behind lenses.
4.8/5
Package includes 4 covers only, as shown in the first picture, no other part included; easy to install, plug and play
Getting tired of the orange/red factory bullet style turn signal light lens? Time to get these popular smoked covers to customize the blinkers, the dark tinted caps add new features to the motorcycle in appearance and maintain clear visibility without weakening the halogen or LED light
Smooth and transparent surface, hard and durable ABS plastic protect the blinker lights from minor impact effectivly
Compatible with Harley Dyna, Street Glide, Fat Boy, Softail, Road King, Springer, and other models with 2 inches standard new bullet style turn signal lights only, not for aftermarket replacement housing
You are backed by 2-Year warranty since purchase date, feel free to send email first if there’s any issue, solution will be offered once details confirmed
$234
They are more or less good for the price they are, but they come with 4 identical-sized taps; the original taps on the back of the sportsters are larger; these don't work; perhaps for other models, but not for the 2017 Iron. Only the forward ones could be placed; as the agency's white focus malfunctions, it is necessary to purchase LED directional (intermittent) front lights.
4.6/5
Protect the inner turn signal light bulbs from dust, dirt or any other damage
Made from high quality Non-brittle Polycarbonate ,Waterproof and weatherproof guaranteed
Plug and play: Mount on front and rear bullet turn signal indicator,Perfectly replacement, no modification needed
3 YEAR WARRANTY: No hassle returns and no hassle warranty replacement.
Aftermarket old bullet style lenses used for Harley-Davidson 1997-2018(Except V-ROD)
$234
After pressing the button on another set that costs $4 more, I saw these right away. When I read the testimonials and the concerns, I also noticed that the vendor was making efforts to address the quality issues. Some things are worth spending extra money on, while others are not. This is especially true when it comes to customizing a bike with several special appointments like LED lighting and new lenses all around, additional "fog lights," etc. It quickly accumulates. I'm delighted to report that I did not encounter any of the quality issues about which some people have raised worry. My gut told me to "go for it." The incredibly bright, amber-colored LED bulbs from ibrightstar were replaced along with these lenses, and I couldn't be happier. The images demonstrate how opaque yet black the lenses are.
4.4/5
32SMD high brightness 2835 LED chips per lights for maximum illumination. Working Voltage: 12V.
All-in-one design. Perfect for Motorbike Scooter Quad Cruiser Harley Kawasaki Yamaha Suzuki Off Road etc. Easy Installation: Mount with 3M tape, 5 wires connection.
Made with a durable flexible FPC & plastic rust-resistant strip and filled with IP65 watertight silicone ensure it could work well in any weather.
Supports four functions: Running Tail Light, Bake Light, Left Turn Signal and Right Turn Signal Lights.
Livtee LED are strictly tested for sale!!! We offer fully " ONE YEAR " guaranteed for manufacturer quality.
$234
They are BRILLIANT. They served as stop, tail, and turn lamps for my 2019 Jeep while it was being towed. There are 8 wires in the Jeep taillights. I didn't want to use the RV's external power source to connect to that mess. So, I simply connected to these using the towing cables, and I placed them below the OEM tail lights. Works well. NOTE: These have 22 ga wires, so you'll need telco connectors to connect them.
4.3/5
Smoke Lens Easy plug and play installation
Package content:4pcs OEM style turn signal lenses,4pcs amber bulbs.
Type of Lights:3 1/4" diameter flat style for Harley-Davidson.
Replace the stock amber lens for a clean, smoked front or rear appearance.
Fitment:Harley Davidson Road King Touring Models,FLST and FXRT 1986-2007
$234
Price Point: 5 out of 5; Quality: 4 out of 5; Recommendation: 4.5 out of 5 4 out of 5 (I like it) Need for Product: 1986-2007 Pros of the Harley Davidson Road King FLST/FXRT Custom Signal include price, four pieces and upgraded appearance. Cons include lack of darkness. My Opinion: It's important to note that the lenses are see-through opaque charcoal colored, but that's okay because, when appropriate, the bulb shines through for maximum exposure. They are worth the low price and look amazing in comparison to the current stock. In addition to the fantastic bulb, you also receive the smoked lens for the price. They come packaged individually in bags. Light output from the bulbs is good, and their color changes to orange. Overall, I think it's a great deal.
4.2/5
✔Easy to Install and Remove: 3 wires are configured, installed in a variety of motorcycles easily, which can be directly connected to the motorcycle ACC circuit, (AAC circuit means Adaptive Cruise Control .Which is the position where the key is controlled).Use the nut to secure the product in places you want to install.
✔Nice Exterior: Black with Amber Lens, high Quality Aluminum, enhance the look of your Motorcycle with these Custom Turn Signals.
â¤100% Satisfaction Guarantee: If the Motorcycle Light make you dissatisfied or have any quality problems, just contact us by email, we would replace any defective products for our customers.
✔Apply to: Universal fit for motorcycles, motorbikes, most Honda, Yamaha, Suzuki, Kawasaki, Harley, Ducati, KTM, BMW, Triumph, Hyosung and other motorcycles with 10 mm Holes Fairing. Fit for all universal 12V motorcycles / motorbikes Tail light, Brake light, Front and back Turn signal light.
✔Water Tight and Anti-corrosion: iP65 Grade (Prevent the infiltration of low pressure water column from any direction),It can be used in rain or in harsh environments.High strength PP has been used for the light body, with features of shockproofand corrosion resistance.
$234
ADVANCED UPDATE #2I had to switch out a few connections and change the flasher on my bike. Everything is back to normal in the globe. The provided lights' wattage was insufficient to activate the flasher, which was a problem. Back to a four star product, but if you purchase two sets of lights, you might want to include a new flasher.***********UPDATE: Despite being connected, the lights do not flicker. They shine brightly but do not flash. The original lights were successfully installed again. Despite not being a skilled electrician, I am capable of wiring a variety of objects. I'm hoping the seller can assist me in resolving the issue. Once the lights are operational, I will upgrade the star rating.These turn signals are not only very reasonably priced, but also sturdy and stylish. Although I haven't mounted either set yet, I tested both sets on my bike's battery, and they were both bright and attractive. even has additional bulbs supplied! This price is unbeatable. After I install them, I'll attempt to post images of them.
4.2/5
COMPATIBILITY: All Harleys motorcycles with 2" inch bullet style turn signals lights, with 1157 front and 1157 rear double contacts bulbs, please check if your bike is in description page before ordering, DO NOT buy if your bike is not on the list
PACKAGE INCLUDES: 2 Amber/White front and 2 Red/Red rear LED turn signal lights, load resistors included just in case of any hyper flashing issue. You are backed by 1-Year warranty since order purchase date
REAR TURN SIGNALS: 2 diode LED panel lighlts with 1157 double contracts plug, outer red ring for tail/running light and center red for rear turn signal/brake light, high luminance and low power consumption, increase visibility and provide new lighting pattern
FRONT TURN SIGNALS: 2 diode LED panel lighlts with 1157 double contracts plug, switchback mode, outer white ring for running/parking light and center amber for front turn signal, high luminance and low power consumption, increase visibility and provide new lighting pattern
INSTALLATION: Easy to install, plug and play; manual included, read before installation; flip LED 180 degree to change the direction to lock in when you feel hard to push in; load resistors included, they are required to installed if LEDs do not flash or hyper flash
$234
Because I misplaced one of the blinkers on the first set I got, as the title indicates, I ordered this set. The new set was delivered, however they were different from the original set. When the blinker was activated on the first set of front signals, everything flashed yellow. On the new set, the blinker's interior just flashes orange while the outside ring remains white. So that they would match, I had to replace both of the front blinkers. As I already stated, the proper operation is not shown in the picture.Unfortunately, I will not be able to return them because I had to adjust them to fit. I like them, but they ought to explain how they operate so that people can choose the set they want.They appear to be of good quality, but who knows how long they will endure. However, if I receive a year from them for this money, I'll be content.
4.1/5
ADVANCE DESIGN: Solid billet aluminum base design and built-in heat sink cooling base to prolong lighting lifespan and improve performance. The LED turn signals designed with 1157 Bullet Style Inserts, which has no extra wiring. The new design allows the turn signal to be perfectly center.
FRONT TURN SIGNALS & RUNNING LIGHT: Each light uses 48 super-bright LEDs to light up the road. The front light have a 24 LED halo ring. The halo ring is 6000K and is a pure bright white as the running light. The inner 24 LEDs are amber and function as the turn signal. The halo ring will turn off when the LED turn signal in active. This allows the LED turn signal to be more noticeable to oncoming drivers.
MORE BRITHER: LED turn signals with 48 super-bright LEDs are brighter, safer and more durable than other lights. Using more powerful LEDs to form a rear facing LED cluster, it lights up the road behind you in a way that every driver will notice. The heat-sink design allows it to use higher output LEDs for the brightest light possible.
PACKAGE INCLUDED：2* Front turn signals with 1157 base. If the lights flash, please contact us. We provide 2 year warranty making sure you get risk-free lights and 100% satisfaction aftersale services.
PLUG AND PLAY: 2†Harley LED Turn Signals fit for most Harley Davidson models. Will fit other makes that use 2" turn signals with 1157 bases. Plug and play design save your more time. Unscrew the lens, take out the dim bulb, and then put the new LED turn signal and the lens back. As easy as changing the bulbs.
$234
I favoured the one-piece design a lot. They were durable and simple to install, and they didn't seem flimsy or cheap. When I opened the box and discovered that SUPAREE had added 2 smoked lens covers along with the 2 Red LED lights, it was a welcome surprise. The only problem I had with this purchase was that I couldn't see in the description that this set came with the two smoked Light covers. I used them because, as I previously mentioned, I was pleasantly surprised, but when I went back to the advertisement, I was still unable to locate what was in the box.
![Kinstecks [New Version] 4PCS Motorcycle Indicators Flowing Turn Signal Lights Motorbike Turning Indicators Daytime Running Lights Brake Lights 12V for Motorcycle Motorbike](/i/81r-5WV5AfL/450/best-powersports-turn-signals.jpg)
![Kinstecks [New Version] 4PCS Motorcycle Indicators Flowing Turn Signal Lights Motorbike Turning Indicators Daytime Running Lights Brake Lights 12V for Motorcycle Motorbike](/i/715wA1cby4L/450/best-powersports-turn-signals.jpg)
![Kinstecks [New Version] 4PCS Motorcycle Indicators Flowing Turn Signal Lights Motorbike Turning Indicators Daytime Running Lights Brake Lights 12V for Motorcycle Motorbike](/i/71uHW%2BR3QML/450/best-powersports-turn-signals.jpg)
![Kinstecks [New Version] 4PCS Motorcycle Indicators Flowing Turn Signal Lights Motorbike Turning Indicators Daytime Running Lights Brake Lights 12V for Motorcycle Motorbike](/i/71mMbBCiOpL/450/best-powersports-turn-signals.jpg)
![Kinstecks [New Version] 4PCS Motorcycle Indicators Flowing Turn Signal Lights Motorbike Turning Indicators Daytime Running Lights Brake Lights 12V for Motorcycle Motorbike](/i/71caqf69YLL/450/best-powersports-turn-signals.jpg)
![Kinstecks [New Version] 4PCS Motorcycle Indicators Flowing Turn Signal Lights Motorbike Turning Indicators Daytime Running Lights Brake Lights 12V for Motorcycle Motorbike](/i/71ZowMyArbL/450/best-powersports-turn-signals.jpg)
![Kinstecks [New Version] 4PCS Motorcycle Indicators Flowing Turn Signal Lights Motorbike Turning Indicators Daytime Running Lights Brake Lights 12V for Motorcycle Motorbike](/i/71pwJunDgbL/450/best-powersports-turn-signals.jpg)
4.1/5
ã€Unique Flowing LED Lighting Design】Amber Color and Flowing Mode, Great for Turn Signal and Indicators Usage
ã€4PCS Motorcycle Indicators】Comes with 4PCS Turn Signal Lights, 12V Universal Suitable for Motorcycle Motorbike Scooter Quad Cruiser Off Road
ã€Easy to Install】Plug Type: Black Wire is Negative, Yellow Wire is Connected Turn Signal Light, White Wire is Connected to ACC or Instrument Light, Red Wire is Connected to Brake Light, Directly Mount to the Original Turn Signal Light Place
ã€New Version Daytime Running Light, And Brake Light Function】New Version Running Light, Similar to Mercedes-Benz Startup Mode, The Daytime Running Light Will Scan Once When It Starts, Very Cool (Notice: The Turn Signal Will be Used First: When the Daytime Running Light or the Brake Light is Turn on, The Turn Signal is Also Turned on at the Same Time, Only the Turn Signal is Lit at This Time; When the Turn Signal is Turned off, The Daytime Running Light or the Brake Light Returns to its Original
ã€Upgraded Version High Flexible Rubber Design】Snakeskin Style Handle, Curved High, Which Can Effectively Prevent Accidental Falls
$234
Only because I wanted turns with built-in running lights did I install the fronts on my bike. I created a more contemporary tail turn layout without the need for wing-style lights. On my Suzuki SV650 Streetfighter, these look just fantastic. I connected the running lights to the low beam headlight line so that if my brights are on, the running lights won't turn on. My dash indication is now solid when the blinkers are engaged, but turns off when the blinkers are off after these were rewired. But it doesn't really worry me. I've also seen videos of folks starting their cars where the running lights performed a "scan" before fully lighting, but mine do not. It's probably my fault for not replacing the flasher relay, but it's not a big concern. They continue to search while blinking. These look so much nicer on a naked bike and are less than half the size of my OEM blinkers. The lights all have built-in crimps that will speed up the wiring process, which was quite simple. To prevent harming other lights or fuses, don't forget to disconnect your batteries before wiring in new components. So that the whites match, I must now purchase an LED component for my headlamp. Hope they endure!
3.9/5
[MATERIAL]: 24 gauge teflon coated wire leads with black heat shrink sheathing, make sure wrap-around LED turn signal stay in place even on the hottest summer day
[Fitment]: Work for most Motorcycles such as Honda, Kawasaki, KTM, Suzuki, Yamaha and many other brands, Fit for Harley 39mm-70mm Fork as well.
[LED Fork Warp Lights]: Come with 36pcs supper bright 3014-SMD Leds each strip, Wrap around your motorcycle forks. Used as front and rear signals light
[DURABLE]: With 3M double side adhesive mounting tape on back and Zip Ties for added strength
[GOOD DESIGN]: 120 degree viewing angle for wider visibility, more secure and brighter. Can work as turn signals, running, license plate lights, etc.; Waterproof & Sleek
$234
For when the KTM 6 Days crashes to the ground, I needed something low profile. Simple to mount, and it looks much more polished thanks to the additional "housing" above the led strip. The product arrived beautifully wrapped, and installation was simple. The seller quickly replaced the damaged strip that arrived with the order. I am completely delighted with these because they are MUCH brighter than other LED strips I have previously used for the same reason. A
COPYRIGHT © 2019
