If you are planning on using plywood for a wheelchair ramp, there are a few things to keep in mind. First, the plywood should be at least ¾-inch thick to provide enough support. Second, the ramp should be covered with a nonslip surface to prevent injuries. Third, the ramp should be designed with a gradual slope to make it easy to use for people in wheelchairs.
The first step is to think about how and where you will be using your ATV ramp. If you will be loading your ATV onto a trailer, then you will need a ramp that is long enough to reach the trailer's loading height. You will also need to consider the width of the ramp. Most ATVs are about 48 inches wide, so you will need a ramp that is at least this wide. If you are using the ramp to load your ATV into the back of a pickup truck, then you will need to know the height of the truck bed.
If you're having trouble with your ATV ramps sliding, there are a few things you can do to try and stop it. One is to put some weight on the ramps themselves. This can be done by adding sandbags or other heavy objects to the ramps. Another option is to secure the ramps to the ground with stakes or other anchors. This will help keep them in place and prevent them from sliding around. Finally, make sure that the ramps are dry before using them. Wet ramps are more likely to slide than dry ones.
There are a few ways to get something heavy out of a truck. One way is to use a ramp. Another way is to use a winch. And yet another way is to use a crane.
4.8/5
✅ THE BEST QUALITY IN THE MARKET- As a leading name in our industry, being around for 20 years, we know precisely what is important to you, and we put it all together in our ramps. We are backing this up with a 5-year Pit Posse guarantee against workmanship and defects. If you are not 100% satisfied, we will give you a full refund or a free exchange, no questions asked.
✅ NO ASSEMBLY REQUIRED- Ramp is easy to use, simple and straightforward. Simply unfold and use. Compatible with most vans and trucks and get the work done quickly and effectively. No other ramps compare.Ramp is 46 inches when folded, will fit in most back seats for easy carry and easy storage.11" wide & 89" long.
✅ COMPACT DURABLE AND LIGHTWEIGHT- This loading ramp is lightweight, durable, weather resistant and built from 6063 aluminum, Weight is 16 pounds. Heavy duty hinges, joints, and crossbars are welded, this allows for the ramp to be folded and unfolded countless times without malfunctions.
✅ PERFECT FOR LOADING AND UNLOADING-Single loading ramp for dirt bikes and other 2-wheel off-road power sports equipment weighing no more then 750 pounds
$234
I already have a cycle gear "trackside" ramp, but I needed another one so I could walk my 600rr up the ramps and onto my pickup (Ram 1500). Since the Pit Posse ramp was less expensive and had the exact same appearance as the trackside ramp, I decided to get it. I initially mistakenly believed that the ramps were identical, but the Amazon/pit posse ramp is somewhat more arched than the trackside ramp. This is advantageous if you have a full-sized pickup and are concerned that loading it may cause the bottom of your sport bike to scrape against the tailgate. There was a lot of space. It was a breeze for me to carry the bike onto my vehicle. The ramp does feel weak and appears to have some elasticity, which is the only issue I have with it. I doubt I would put my trust in it at 750 lbs.
4.8/5
Practical handle allows easy transport, easy portable.
Foldable loading ramp according to CE standard, Durable Frame, Sturdy And Durable.
Integrated safety chain,.Folds Flat For Easy Storage. Easy to assemble the ramp.
Foldable Ramp up to 550 lbs (250 kg) kg loadable for loading motorcycles, lawn mowers, motor boats, construction machines, etc.
For loading and maintenance step place and turck place, widely used.
$234
These ramps are simple to carry and set up for usage, and they function quite well. They have been helpful to me when loading ATVs and riding lawn mowers. They have sturdy, long-lasting designs with excellent tire grip patterns. The only issue with these units is that they are not very wide, so you must ensure you have a straight shot when loading and unloading larger machines. If you don't pay close attention to lining up straight on these ramps, there isn't much room for mistake, and it's easy to run off the edge. Apart from that, I enjoy how well-made they are and how simple it is to fold and carry them thanks to the handles that resemble suitcases. Both the ground end and the truck tailgate hold them securely. These were intended to be used as a wheelchair ramp, but they were too easily knocked off the ramp's sides.
4.6/5
Includes mounting hardware to make installation fast and easy
Constructed from heavy duty extruded aluminum that will provide years of service
Features non-skid top surface for improved traction
Equipped with protective pads to protect your tailgate
Turns your 2" x 8" boards into a sturdy, all-purpose utility ramps for loading your trailer, truck, shed and more
$234
I ultimately purchased a second set of these. I mounted the first set on a set of 2" X 8" boards in accordance with how they are meant to be used. Although the original intent was to drive a lawn tractor up on them so I could easily access the blades, I'm now surprised at how frequently I utilize them. Yes, a cheap lawn tractor—not one of those expensive "drive over" models. Perfectly functional. More often than I thought, I use them to load and unload big items from the SUV. The aluminum kit is incredibly sturdy and simple to install. Unexpectedly, the neighbors occasionally borrow these.I purchased a second set, divided them in half, and mounted them on 2" X 4" boards that I often use in pairs to slide lighter things in and out of places like a crawl space that is located in a portion of a basement.
4.6/5
Includes mounting hardware to make installation fast and easy
Constructed from heavy duty extruded aluminum that will provide years of service
Features non-skid top surface for improved traction
Equipped with protective pads to protect your tailgate
Turns your 2" x 8" boards into a sturdy, all-purpose utility ramps for loading your trailer, truck, shed and more
$234
To fit my golf cart into my pickup, I bought these. This past weekend, I got to put them to the test. They are both quite nicely made, strong, and light enough to be carried together without any difficulty. I can fit both of them under my golf cart while traveling when they are folded. I did see a reviewer here mention something about the metal being held together by merely spot welds. I can vouch for the fact that the pair I received has significantly larger welds than merely spots. The welds are exceptionally well done and thick. The cross bars are three-point welded solid aluminum rods. There are multiple massive weld spots on the larger connecting points in the pivot area. I have no concerns regarding the rigidity of these ramps because they are entirely made of aluminum and have huge S.S. nuts and bolts where they fold. good value for the money. Anyone trying to put 1500 pounds or fewer into the back of their truck should use these, in my opinion.In order to add some protection in the unlikely event that one of the stock cables ever fails, I chose to buy additional tailgate supports. It's just peace of mind knowing that my truck, my cart, and I are protected. Just wanted to add that information for anyone using ramps to carry heavy items into their trucks because there is a lot of strain on the stock tailgate cables. Although the steel cables themselves may never fail, the crimped connections at the ends could fail more easily even though the cables themselves are sturdy. To all, a happy and safe loading of your toys!
4.5/5
6600LB CAPACITY: With dimensions of 20"wide x 10.6"deep x 4.1 inch high each and on a flat surface, this auto car ramps for low cars support up to 3.3 tons or 6600 lbs weight allowing vehicles to be driven safely up or down uneven ground or curbside
STURDY HARDWARE: This pair of mobility curb ramps for driveway are constructed from durable and high quality materials. Made of industrial grade compound plastic material or Polypropylene (PP) which is a strong type of material and is built to last
LIGHTWEIGHT: Kit consists of 2 piece heavy duty poly driveway ramps for low cars which are surprisingly lightweight thus very easy to carry or transport from one place to another. Suitable for curb, home garage, loading dock or house driveway use
PREFORMED HOLES: The outdoor threshold ramp set can be permanently installed in high traffic areas using the integrated mounting holes at the bottom of each ramps. Features textured surface for increased friction/traction and angled section tracks
MULTIPURPOSE USAGE: The Pyle 2PC Portable Curb Ramps can be used for a variety of purposes. Gives access to car automotive vehicle, trailer, wheelchair, walker, lift, cart, motorcycle, bike, scooter and handtruck over curbs or elevated sidewalk
$234
I travel in a "Toy Hauler" that I use to transport my Can Am Spyder rear-wheel-drive trike. The transition from the street or parking lot to the ramp door is fairly high, and my trike is extremely low to the ground, so I have to back up the ramp. I have considerably more directional control using these ramps, which are ideal for that stage of the loading process. I was searching for something portable and lightweight. To span the 65" distance between the two front wheels and the one rear driving wheel, I need two sets.
4.5/5
Protective design - soft tipped design reduces abrasion between your ride and the ramp. There are 3 caps at the bottom of the loading ramp, which will keep it from slipping and makes much safer and more stable when you load
Light weight and rust protection - the durable aluminum material makes the ramp more light and not easy to get rusty. It can be used easily both indoors and outdoors
Practical use - easy to load various motorcycles and dirt bikes with this loading ramp supporting your favorite ride. You can buy two to use with ATV And UTV, lawn mower, truck, motorcycle, trailers, dirt bike and garden tractor and so on
Large weight capacity - Constructed of durable aluminum, Max load capacity up to 340 kg/ 750 lb. Provides a greater traction and make it easy to load
Easy to assemble and Fold - unfolded dimension: 89 x 11. 8'' (Lxw); folded dimension: 115 x 30 cm/ 45. 3 x 11. 8'' (Lxw). it can be folded into a compact size when you do not use. Convenient for storage and carrying
$234
I bought these ramps so I could use them to load my truck's rear with my wife's Honda scooters. Much better than my old method of trying to raise the scooters.Although they appear to be well crafted, they are nevertheless quite light and portable.When they were delivered, they were very carefully wrapped and free of any dents or blemishes.The ramps' pivoting bolts being loose was the only drawback I could see. I'm not sure why, but perhaps you should tighten them before using the ramps. Although it did not cause any issues, it appeared as though it could need to be replaced and mended if it were to break off after several uses.Overall, this folding ramp is difficult to match for the price.
4.1/5
Includes an anti-rattle device and spacer bar adapter to fit youth 50-80cc bikes
Self-storing ramp installs on either side with roll-on, roll-off design for easy loading and unloading
Manufactured from lightweight aluminum with a 400 lb. weight capacity
Designed for bikes with wheels up to 5-1/2†wide and use with Class III or IV hitch receivers
Durable, hitch-mounted motorcycle carrier for use with dirt bikes and motorcycles
$234
The 45 minute assembly process was simple, but I spent practically the entire time looking for my sockets and wrenches. When I stand on it where the motorcycle would be (I weigh 186 lbs), it feels sturdy and should be able to support a Yamaha TW200 (278 lbs).Making a better way to attach the ramp for transportation is the only thing I would modify. The tiny wingnuts are a PITA. To get the ramp to stop swaying up and down requires a lot of finger work. For a better answer that was quicker and painless, I would pay $25 extra. Additionally, the anti-wobble attachment is cheap and stretches! About every 10 miles, check! Those 17mm bolts are not going to remain in place.UPDATE: After buying some lockwashers and nuts, I now tighten the anti-wobble bolts and use the nuts to LOCK the bolts so they won't loosen (which they will do when traveling!). Safety issue is resolved. In order for cars following to see my brakes, I have also mounted a trailer light kit onto the rack and plugged it into my trailer outlet. My SUV's lights are severely obstructed by my motorcycle.The very final few inches of the hitch tube's tail end were actually welded on, giving the impression that the tube was too short and needed to be extended. looks stupid. It certainly has adequate strength for a tie-down strap.EDIT: I'm giving the carrier a trailer light kit. My turn signal and brake lights are totally obscured by the motorcycle in the back. At night, this isn't really safe.
4.1/5
SAFETY STRAPS INCLUDED: No need to purchase safety straps separately! These truck tailgate ramps include heavy duty load straps to keep the ramp firmly attached to the tailgate. This ensures safe transfer onto a truck without collapsing or buckling. Use them again and again to keep your 4x4 ATV, mini 4 wheeler, or lawn mower safe during transfer.
CAPACITY OF 1,500 LBS: These ramps are ideal for transferring any four-wheeled vehicle to a truck trailer. Use a single ramp to transport a dirt bike or motorcycle and use both to load an ATV, 4-wheeler, or lawn mower onto a truck bed. Clevr’s 7.5ft aluminum .ramps are both sturdy and versatile with their 1,500 lb capacity.
A FOLDING ALUMINUM RAMP WITH STURDY CONSTRUCTION: Each component of these trailer ramps is designed with optimal function in mind. They fold for easy transportation and only weigh 33 lbs, making them easy to move and operate. Rubber tipped fingers provide extra security to your vehicle while also preventing damage to the tailgat
IDEAL ATV, DIRT BIKE, AND LAWN MOWER LOADING RAMPS: Whether you’re transporting an ATV a few miles or all the way across the country, Clevr ramps will help get the job done. The arched ramp design allows for optimal clearance, ensuring a smooth lift every time. These ramps are ideal for any mid-size tires including ATV tires and 4-Wheeler tires. They also make great lawn mower, motorcycle, snow blower, dirt bike, and garden tractor loading ramps.
PORTABLE MUST-HAVE ATV AND 4-WHEELER ACCESSORIES: ATVs and 4-wheelers are great for navigating backcountry and dirt roads, but Clevr truck bed ramps are a necessity if you need to take your vehicles farther from home. With its 1,500 lbs capacity, it can easily handle even the heaviest of ATVs. No other loading ramp compares in quality, affordability, or portability.
$234
You may see my problem below, edited. Since I was content with just a single ramp, this company quickly gave a partial refund (other one is screwed up). You should be good to go as long as you keep your box in good shape till you can inspect your ramps. It is being sold by a reputable brand and has a good design. At this price, you can't anticipate the highest level of quality control, and mistakes do happen. With the ramp, I'm pleased.Original assessment: I welded a hinge at an angle to one of my ramps. The hinge on the ramp wants to tear itself apart as you unfold it because it is welded at an angle. It will open completely, but I'm sure a weld will fail soon. I purchased it to carry dirt motorcycles, therefore I won't be loading them heavily. I was planning to go back, but as soon as I opened my package, it was crushed and torn to pieces. too much trouble Keep your box in good condition if you buy something in case you need to return it.
4.1/5
LARGE CAPACITY: With a ramp size of 4 ft wide x 16 inch deep & on a flat surface, this solid utility curb ramp can support up to 5 tons or 10,000 lbs allowing standard vehicles to be driven safely up or down uneven ground or curbside
SUPERIOR FLEXIBILITY: The heavy duty 4 ft car ramp is surprisingly flexible making it suitable for curb, home garage, loading dock & house driveway use
PREFORMED HOLES: The outdoor threshold car ramp can be permanently installed in high traffic areas using the integrated mounting holes at the edges of the ramp. It also has built-in water or cable channel in the bottom
STURDY HARDWARE: This mobility street curb ramp is constructed from durable & high-quality materials. Made of industrial grade rubber material which protects your car from vibration & reduces the noise when you drive in or out through the curb
MULTIPURPOSE USAGE: The Pyle Vehicle Curb Ramp can be used for a variety of purposes. Gives access to a lowered car auto vehicle, SUV, van, mobile wheelchair, motorcycle, bike, scooter & hand truck over curbs or elevated sidewalk
$234
At the end of the driveway, there is a drop-off located below the curb. Passenger automobiles would rub on the curb edge unless you entered at an angle. These ramps are exactly what we required to address this issue. To increase the driveway's width, we ordered three. They have a channel underneath them that enables water to run through, and they are hefty enough to not require anchoring. As a result, neither debris nor floods occurs around them. We have easily driven several other vehicles, a fully loaded moving truck, over them. They support the weight and remain in place without sagging or shifting.
4/5
Limited lifetime warranty
120 lb. capacity
Kayak hoist system lifts and stores kayaks, canoes, bikes, ladders and more in the shop or garage
Easily lift and lower stored items; one person operation
Includes pulleys, lift hooks, mounting brackets and hardware, 50' hoist rope, and 2" x 94" saddle straps
$234
I used this in my garage to keep my kayak on top of my car. Installation was really simple. It should be noted that the mounting instructions state that the brackets should be spaced 2/3 of the kayak's length apart, but this is incorrect. You should space your mounts about one-third of the kayak's length apart. I measured the 2/3 length and placed them closer together since I believed they were too far apart. For a 10 foot kayak, I mounted roughly 5 feet apart, although it was still further away than I believe is optimum. The straps slipped outward when I attempted to hoist the kayak while it was wet. I secured the straps by tying them together, although installing the brackets closer together would be preferable.Operating the breaking mechanism is a little difficult. I haven't been able to simultaneously lower the kayak's two ends. The only way I can lower the kayak is to bring the rope end almost directly below the break, grab a rope in each hand, pull both ropes toward the center of the kayak, and then slowly raise each hand, alternating, until the kayak is completely lowered.The supplied rope is of really poor quality. My kayak was raised and lowered four times, and I saw substantial fraying (fraying became apparent after the first lift/lower operation). After lifting and lowering the rope twice, I replaced it with a 1/4" nylon braided rope from Home Depot and there are no signs of fraying.This is perfectly functional for the price. I don't worry about it breaking and harming my new car because I use it to store a 60-pound kayak over it.Due to the flawed directions, subpar rope, and subpar mounting hardware, I deducted one point.
The average person will need an ATV ramp that is at least 8 feet long in order to safely and effectively load and unload their vehicle. However, there are a few things to consider when choosing the right length for your ramp. The first is the height of your ATV. If you have a taller vehicle, you will need a longer ramp in order to reach the ground safely. The second thing to consider is the angle of the ramp. A steeper angle will require a longer ramp in order to reach the ground safely. The last thing to consider is the weight of your AT
A loading ramp is a vital piece of equipment for anyone who needs to load and unload heavy items from a truck or trailer. But how long should your loading ramp be? The answer to this question depends on a few factors, including the height of your truck or trailer, the weight of the items you'll be loading, and the length of the ramp itself. Generally speaking, a loading ramp should be at least as long as the width of the truck or trailer. This will ensure that the ramp is long enough to support the weight of the items you're loading.
There is no definitive answer to how long a ramp should be, as it will depend on a number of factors such as the height of the surface you are trying to access and the gradient of the ramp. However, as a general rule of thumb, a ramp should be at least 1 metre long for every 10 centimetres of height difference.
An ATV typically weighs between 400 and 700 pounds. The weight of an ATV varies depending on the make and model.
Most 2x8 ramps can hold up to 500 pounds, but it is always best to check with the manufacturer to be sure.
Aluminum ATV ramps can hold a lot of weight, but it depends on the specific ramp. Some ramps can hold up to 1,000 pounds, while others may only be able to hold 500 pounds. It is important to check the weight capacity of the specific ramp before using it.
COPYRIGHT © 2019