4.2/5
JFG Handguards Is With Enough Room For Brake Cables Control And Other Devices
Aftermarket handlebar Hand Brush Guards for off road and dual sport motorcycles
Fit All Handlebars Range 7/8" 22mm and 1 1/8" 28mm
Material:PP Plastic and Aluminum Alloy
JFG Hand Guards Can Protect Your Hands From Brush Rocks Mud And Cold wind and reinforced to protect your motorcycle in the event of a crash
$234
Normally, we only use handguards from Acerbis, Polisport, or Cyrca, but for this ATV, we thought we'd try something less expensive.Since there aren't many reviews or pictures of these, hopefully this will be useful to someone.These handguards arrived shrink-wrapped, with all hardware included but no instructions (but you cant really mess this install up).The metal bar feels wonderful overall and is nicely thick and robust. As opposed to other surfaces, such those used by acerbis, this one has a completed texture. It looks just as wonderful with this finish.I had anticipated sharp mold lines, but the cups are really well made and can be inserted without any sanding. If the aluminum bar is sufficient for your needs, you can dispense with the cups altogether because they are fastened using bolts.The clamp is made of aluminum as well, and the threads on the bolts are neatly done. I particularly appreciate that with this system, unlike the Acerbis ones, we don't need to remove everything from the handlebars in order to slip the clamp off.Additionally, the sleeve bolts are well-finished, so they ought to function with two different handlebar thicknesses. On our original trx450r handlebars, we ultimately decided to use the original sleeve bolt. To do so, we simply had to slightly enlarge the hole in the aluminum bar using a step drill.It was so simple—we simply constructed the guards loosely, pulled them into position, and tightened everything up.Though we haven't used them on the track yet, based on the materials, I have no doubt that they will hold up well and be durable for trail riding.
4.2/5
PACKAGE INCLUDEDS: One pair of hand guard.Easy to install it, the Installation Instructions NOT Included.
CONDITION: After Market 100% Brand New and high quality.Surface Finish: Gloss Black
Material: constructed of 16 gauge stainless steel with 12 gauge reinforced mounting tabs.
FITMENTS: The Small fit Dynas, and 06 and older Baggers Electra Street Road Glide Road King and FXR's with upgraded controls.
Length: Overall length of guard is 7.3 inches from mounting base to guard end.
$234
For my bikes, I purchased two pairs of them. On a 2009 Fat Bob, one; on a 2019 Road Glide, the other. They fit my Fat Bob because of where the brake cylinder is located. But because the levers and cylinders are identical on both sides, the Road Glide doesn't require a longer arm on one handguard. As a result, I used the two short ones on my Road Glide and the two long ones on the Fat Bob. Other handguards can cost twice as much, therefore the price is great. They appear to be high quality and are weighty. Rocks will now scratch the paint, but you may just touch them up. Depending on the temperature, they can help to reduce wind. Please don't expect these to work for wind because I ride in 20 degree temperatures. Overall, I'm quite content; however, I would prefer not to have to mix and match them.
4.1/5
Material:PP Plastic and Aluminum Alloy
Protect Your Hands From Brush, Rocks, Mud And Cold wind
Efficiently Protect Hands While Driving Reduce Your Hands Or Fingers Fatigue
With Enough Room For Brake Cables Control And Other Devices
Fit All Handlebars Range 7/8" 22mm and 1 1/8" 28mm
$234
Who thought Chinese construction was of a higher caliber?For the price, I must admit, I didn't have high expectations, but these things are solid. They are imitations, and I don't like it when large foreign corporations mimic domestic firms and undercut them by using less expensive materials.That being said, I've never been able to justify spending $100 on a pair of hand guards because plastic and aluminum aren't that expensive, nor is the R
4.1/5
With Enough Room For Brake Cables Control And Other Devices
Protect Your Hands From Brush, Rocks, Mud And Cold wind
Fit All Handlebars Range 7/8" 22mm and 1 1/8" 28mm
Material:PP Plastic and Aluminum Alloy
Efficiently Protect Hands While Driving Reduce Your Hands Or Fingers Fatigue
$234
You won't find cheaper, more capable, or more attractive guards. They are constructed of aluminum for whatever stupid reason, which I can only imagine is because someone in Taiwan developed them and doesn't know what in the world they are used for. Given the amount of ongoing stress they experience, they ought to be built of steel. I actually sheared one of these on my previous trip, so I'm now using a second set. Fortunately, the plastic overmold kept the assembly together, which was necessary for me to get home. Again, completely worth the money, and now I have a replacement left guard! I could, however, go through five pairs of these before hitting the cost of one of the larger name brand guards.The mounting hardware is mediocre; consider visiting Ace to get better fasteners.
3.8/5
Fit All Handlebars Range 7/8" 22mm and 1 1/8" 28mm
Material:PP Plastic And Aluminum Alloy
Aftermarket handlebar Hand Brush Guards for off road and dual sport motorcycles
JFG Hand Guards Have Plenty of room for cables and brake lines
JFG Handguards Reduce Your Hands Or Fingers Fatigue and reinforced to protect your motorcycle in the event of a crash
$234
The BEST bash guards I've ever placed are by far these! All of the accompanying hardware is quite high quality, and the articulating clamps enable them to fit the bars almost exactly. I'm quite amazed by how solidly they are mounted because I've never seen bar clamps that allow for this level of dexterity. There is no risk of them coming loose or rattling about when you ride because the compression fitting for the bar tips comes with two sizes of collars that tighten in like they're stuck in a vise. You also won't likely strip the screws out. I had to redo it a few times to get the plastic shims combination just right because I had to use a lot of force to make sure it was held together properly. The hardware was slightly damaged, yet it continued to function flawlessly and didn't lose any threads. Although I haven't had a chance to battle test these yet, after seeing how poorly made many of the other inexpensive versions have been, I think these hand guards will withstand the assault. They also appear lovely! excellent fit and finish To my amazement, they feel somewhat like carbon fiber. I'm not sure if that implies they will hold on to dirt longer than usual, but they do look nice.
3.7/5
Manufacturer:BikeMaster, Part Brand:BikeMaster
Manufacturer Part Number:65-025-010402-11
Brand:BikeMaster
$234
In 1978, Hippo Hands first debuted. They were created by Craig Vetter, who made a fortune in the 1970s and 1980s by manufacturing Windjammer fairings. They lacked firm sidewalls and had a fleece-lined plastic cover. Although their pancake shape made storage simple, at highway speeds the wind would cause the mitts to retract and engage the clutch or hand brake lever. The challenge of getting your hands within the flat pancake form was a second issue for riders.In response to criticism of the original pancake design, Vetter developed the second version in 1982. Hands could easily enter and exit the mittens because to the firm walls of this one. The effort was now in putting them away once the temperature rendered them unnecessary.Your gloves are comparable to the original Hippo Hands (pancake design). Their difference lies in the lining. If they fold back quickly enough to engage the hand brake, that will be the real test. It would be ideal to attach something, like a coat hook, along the exterior wall to stop the mitts from quickly folding back.My Hippo Hands from 1978 and 1982 are still in use.
COPYRIGHT © 2019
