A too-large main jet can cause the engine to run hot, knock, ping, and overheat. The engine may also surge or hunt when cruising at part-throttle. Popping or spitting through the carb can occur when the throttle is opened.
than likely this will have a lot of dirt and grime build up on it so give it a good cleaning. Once we've got the outside really clean, just start at the top and remove the valve lever housing cover. More than likely, this will have a lot of dirt and grime build up on it, so give it a good cleaning.
A faulty ignition coil can cause your ATV to bog down and struggle. The ignition coil is responsible for transferring a spark to the spark plugs. If the coil is not working properly, the spark will not be strong enough to ignite the fuel. This can cause the ATV to run poorly or even stall.
4.9/5
Idle adjustment screw, 3/5" air intake Air mixture adjustment screw
Package list: 1x caburetor, 2x gaskets
Fits Mini baja doodle bug db30 db30s db30r
Fits Mini baja blitz db30bl, Mini baja racer db30g
Fuel shut-off switch, with Manual choke lever
$234
I wasn't expecting much for $8. This carb is very identical to the factory-installed one on my DB30 Doodlebug, but after installing it and making a few tweaks, my kids can ride it. It has run longer than two minutes for the first time in five years.It still has way too little power, but at least it functions perfectly now.
4.7/5
Carburetor for Briggs & Stratton 124T02 124T05 124T07 126M02, Briggs & Stratton 129700 129800 123H00 123J00 124H00 125H00 12G700 12G800 12J700 12J800 12J900 12L800 12U800 12V800 12C700 12C800 12D800 4 Cycle Small Engine. Carburetor for Toro 16401 20716 20712 20713 20714 Walk Behind Mower,
Carburetor for Briggs & Stratton 694202 693909 692648 499617 799868 498170 497586 498254 497314 497347 497586 497410 799872 790821 498254 497347 497314.
Replaces Briggs and Stratton 14111 carburetor, fits Most 122000 Model Briggs & Stratton Engines, compatible Model: 120XXX / 121XXX / 122XXX / 12EXXX / 12TXXX With Primer Type System.
Pre-adjusted before shipping, no extra adjustment needed. It's a bolt on and go carburetor. Comes with 1 carburetor, 1 mounting gasket, 1 rubber o-ring. HOOAI locates within the states, we provide carefree return, and 90 days money back guarrantee! Lifetime warranty against manufacturer defect!
Carburetor for Stens 50-657, Stens 520-966; carburetor for 4-7 hp engines with no choke; carburetor for Snapper Ninja 6.75hp Engine; carburetor for Craftsman 6.5hp Snapper Ninja 6.75hp Engines
$234
The engine's inability to start was fixed by the carburetor. The carburetor may be replaced much more easily and quickly than it can be rebuilt. Financially speaking, that is also reasonable given the cost of this aftermarket availability.The only problem was that one of the holes where the air cleaner housing bolts in need some thread cleaning. One of the screws had a #10-32 thread pitch, which I matched with another screw. Everything bolted up perfectly once I put a little cutting fluid through the tap and cleaned off the junk.Please make a note of all the specifics of your carburetor as well. On two separate mowers, I was changing one. For the mower with the priming button, use this. The non-primer mower features two black pivots on top that match the two butterfly valves in the carburetor, which has two of them. I ordered two of these by mistake, and I had to exchange one of them for the right one. Here is the non-primer mower version with the two valves: Briggs Stratton 799866 Carburetor 790845 799871 796707 794304 Craftsman Toro Carb
4.7/5
Fits Honda Rancher 350 1987-2000
Fits Honda Foreman 450 1998-2004
Fits Honda Fourtrax 300 1988-2000
Fits Honda Fourtrax 350 1986-1987
Fits Honda Foreman 400 1997-2004
$234
Put this on a 1987 Honda STX350 four-wheeler. Since the end of the OEM throttle cable that screws into the carburetor is too large, the carburetor will not accept it. I tried the supplied cable, but it was a touch too long and gave the throttle too much play. We ultimately decided to purchase a Tap, drill out the carburetor where the cable goes into, and tap so we could utilize the OEM cable. The strange M10x1.25 thread size was one I did not have in my tap and die set. So far, this has worked well. After some effort, the four-wheeler began, but that was just because it hadn't been used for a while. Once it got going, there was no need for modifying, and it worked well. without choking days later from sitting, starts right away. Given that they no longer produce the OEM carb for the wheeler, this is the best option for the money. Even though the fuel line was on the opposite side, we still had to install new fuel lines on it, so it wasn't a major difficulty.
4.6/5
Size: Center mounting hole: 42mm, core hole: 19mm, choke hole: 24mm
New quality replacement carburetor
You will receive exactly showed on the picture
Replaces 16100-ZLO-W51 / 16100-ZH8-W61
Fits for Harbor Freight Predator 212cc 6.5hp Go Kart OHV Engine
$234
How is a $14 carburetor made and sold?My log splitter uses a 212 cc Viper engine built in China, which is the same size as the 212 cc Predator engine from Harbor Freight. I let the splitter sit for a season after three years of single-pull starts. I then attempted to start the engine two years later. Very bad...After dismantling the carb, it was discovered that there was a fuel draw or air leak issue. (The ethanol in gasoline damages carbohydrates negatively) A rebuild kit with gaskets was sought after, but this full carburetor was discovered for roughly the same cost. Purchased it, put it in place, and with a single pull, the engine started up again! Wow...So, yeah, I give this five stars.
4.6/5
150cc Carburetor May also fit some Japanese Style, like Honda, Yamaha, Suzuki, Kawasaki.150cc Carburetor AKA GY6 150cc Carburetor,150cc Scooter Carburetor,ATV 150cc Carburetor,GY6 Carburetor 150cc,150cc Carburetor Kit,TaoTao 150cc Carburetor,PD24J Carburetor,157QMJ Carburetor.
We provide carefree return, and 90 days money back guarantee! Just want you to shop with confidence!
This is a brand new GY6 150cc Scooter Carburetor Includes Electric Choke Inner Diameter (intake side): 24mm,Outer Diameter (intake side): 32mm,Inner Diameter (air filter side): 38mm,Outer Diameter (air filter side): 42mm
150CC Carburetor for GY6 125cc 150cc 152QMI 152QMJ 157QMI 157QMJ Engine ATV Quad Bike 4 Wheeler Dune Buggy Go Kart Karting Moped Scooter.
150cc Carburetor may fits for most Chinese Brand Vehicle like Roketa, Sunl, Baja, Kazuma, Carroll Stream Eagle, Taotao, Panterra, Kymco, Redcat Tank Giovanni Aimex Jackel Wildfire Xtreme Seaseng Qlink Yiben Jonway Jmstar, Vento, Tng, Apollo, BuYang, Coolster, JCL, Jetmoto, Jonway, Kinroad, Loncin, Motobravo, Polaris, SSR, TTR, Yamoto, Znen, Zongshen, etc.
$234
Perfectly suited my 2019 Taotao Quantum Tour. The manifold didn't even need to be changed. I had already modified my cdi and a few other things, but as soon as I applied this, the power difference was noticeable right away. I increased from a top of just over 40 to a bottom of just over 60, so I would say it was absolutely worthwhile. Since doing this requires some mechanical aptitude, I also advise upgrading your brakes (pads and caliper). I installed a racing caliper up front, changed the brake pads all around, and tightened the back tension screw. I set my air box aside for something to play with later because I didn't like having to remove it in order to use the accompanying air filter, but in all honesty, I don't think I need it.
4.5/5
HOOAI locates within the states, we provide carefree return, and 90 days money back guarrantee! Lifetime warranty against manufacturer defect!
Honda ENGINE GCV160LA Type (A1A, A2R, BHH, E1A2, HON, GCT, RAN, N1A) Honda ENGINE GCV160LA0 Type (A1A, A2R, BHH, E1A2, HON, GCT, RAN, N1A);Honda ENGINE GCV160LE Type (A2A9, A4A9, HON, GCT, RAN) Honda engines GCV160 and GCV160A (A1AE, A1AF, A3A, N1AF, N5AF) (use up to engine SN 2225727)
Comes with 1 carburetor, 1 fuel filter,1 spark plug,2 mounting gasket
GCV160 carburetor replaces OEM part numbers: 16100-ZM0-804 16100-ZM0-023 16100-ZM0-802 16100-Z0L-013 16100-Z0L-003 16100-ZM0-803 16100-Z0L-023.
Honda ENGINE GCV160 Type (A1A, A2A, A2R, HON, GCT, RAN, N1, N2, A1AE, A1AF, A3A, N1AF, N5AF)(use up to engine SN 2225727) Honda ENGINE GCV160A Type (A1A, A1AE, A1AF, A1AS, A2A, A2R, A3A, BHH, E1A2, E1A4, E1G7, E5A4, EHHB, HON, GCT, RAN, N1A, N1AF, N5A, N5AF, NBL1,A1AE, A1AF, A3A, N1AF, N5AF)(use up to engine SN 2225727)
$234
The new carb is functional.The lawn mower and original carburetor are seen in the photo I posted.Without being too technical, the picture was taken while the original carb was normally fully closed and opened upon starting. The new carburetor is configured with the auto choke, which is the silver top plate with the two holes, and is fully open as usual. One for the spring and one for the cable wire. The throttle plate is unconnected. Once more, the new carb is perfect. No grievances.Gaskets; While not all of the gaskets related to my lawn mower were there, the essential ones were. I just used the extra set of gaskets I had for my lawnmower. On Amazon, a full gasket set is offered.My mower required a lot of assembly, if you know what I mean. Before the two screws are tightened onto the engine to mount it, the entire assembly is put together. For those who are not mechanically inclined, this is a great difficulty.Removal, disassembly, cleaning, and reassembly with fingers crossed beats the incredibly low price that includes value-added goods because cleaning an old carburetor could lead to failure and you would need a new carburetor otherwise.The gasoline line, filter, and spark plug were all excellent extras. Since my mower lacks an external filter, I simply retained those objects for future use.
4.4/5
Brand New Quality Parts. Ships Fast!!
$234
Okay, I purchased this Chinese-model 110 cc Roketa atv carburetor. It was specified as fitting in the instructions. This ATV has been inactive for more than two years. I changed the carb and the oil, and I used new gas. I made do without directions because it fit perfectly. With the aid of starting fluid, the atv started, but once it got going, it really stayed going. I haven't seen it with this much life in a very long time. So, yes, this product does indeed function; however, I will need to adjust the screw before continuing.
4.4/5
PZ19 cable choke
Come with 19mm Carb with Hand Choke and 35mm Air Filter
Fits for 50cc 70cc 90cc 110cc 125cc ATV Dirt Bike and Go Kart Horizontal Engine
The air filter interface outside diameter:37mm. Intake inside diameter:19mm
35mm Air filter
$234
I wasn't sure if this would fit my son's Tao Tao GK110 go-kart, but because the dimensions looked the same, I took a chance and got it anyhow. I am happy I did. The go-initial kart's asking price from the firm I purchased it from was more than twice what Amazon advertised it for. This carburetor was a flawless fit and an excellent match. I also replaced the gasoline filter because a new one was included in the bundle. When everything was connected and the go-kart was started, it operated flawlessly. After installation, the carburetor only very minimally needed its idle adjusted. I'm overjoyed with this purchase.
4.3/5
PZ20 Carburetor Fits Honda CRF50F 2004-2009 2011-2012, Honda CRF80F 2004-2009 2011-2013.
Please check the dimensions of this carburetor, shown in the second and third pictures! Your old carburetor needs to look like the same with our pictures to replace it!
Replacement of most Chinese brand carbs such as Taotao SunlRoketa Coolster, Taotao, Sunl, Roketa, Kazuma Buyang, Coolsport, Lifan, Kazuma, AIM-EX, SUNL, Honda, Redcat, Eagle; Go kart Moped Scooter Inner Diameter (intake side): 20mm Mounting Center to Center: 48mm Outer Diameter(air filter side): 32mm
PZ20 Carburetor Rebuild Kit equipped with 35mm motorcycle conical air filter, double steel mesh design, suitable for most 35mm motorcycles. Carburetor for Dirt Bike ATVs, Quads, Go Carts, and UTVs CRF XR 4 stroke under 125CC ATVs Chinese ATVs, go karts with 4 stroke engine PZ20 Carburetor fit Models for Buyang, Coolsport, Lifan, Kazuma, SUNL, Honda, Redcat, Eagle; Go kart SUNL TAOTAO.
PZ20 Carburetor, For TaoTao NST SunL Kazuma Baja 50cc 70cc 90cc 110cc 125cc ATV Go kart.
$234
Excellent purchase! I couldn't get the Tecumseh HMSK80 engine to start. The carb was thoroughly cleaned, but it still wouldn't start. I looked for carbs on AMAZON, read reviews, and bought the HOOAI carb. Excellent value and prompt delivery. watched a YouTube video on installing carbs before installing it. The engine started right away and seems more powerful than ever. It is simpler to purchase and install this carb than to perform a rebuild, which is nearly as expensive. A couple of things: I fitted the supplied priming bulb, which is a benefit. Although one reviewer claimed it lacked one, the supplied fuel filter does in fact include a screen. He might have had a flaw. Additionally, the carb/shroud bracket's port holes are self-threading; all you need to do is use the right screwdriver and install it in a straight line. The provided tubing is too long to replace my fuel line and too wide for the primer bulb. That piece was therefore useless to me. Thank you to Amazon and HOOAI!
4.2/5
Fits Honda CRF50F 2004-2009 2011-2012, Honda CRF80F 2004-2009 2011-2013
Package list: 1x Carburetor, 1x Air Filter, 1x Fuel Filter
For TaoTao NST SunL Kazuma Baja 50cc 70cc 90cc 110cc 125cc ATV Go kart
$234
This fit my TaoTao TForce 125cc four wheeler perfectly and was a great bolt on replacement. The wheeler just required a small amount of tuning to resume reliable movement. However, the air filter for this wheeler was defective since additional hose was required to connect the engine to the top of the filter. Not exactly the reason I bought it, so no big deal. The float chamber's ability to be repaired is another plus. I felt that the drain plug was torqued on far too tightly, so I had to break out my hammer drill to remove it.
If your pilot jet is too big, you'll notice a few things. First, your bike will run rich at low speeds and low throttle. You'll also find that your bike struggles to idle, and may even stall. Additionally, your bike will likely be hard to start.
The air fuel mixture screw is also known as the idle mixture screw. An air fuel mixture screw is a special screw on an engine's carburetor that controls how much air mixes with the fuel. Adjusting this screw changes how fast or slow an engine idles and how smoothly it runs. The air fuel mixture screw is also known as the idle mixture screw. The air fuel mixture screw is usually located on the side of the carburetor, and is turned with a screwdriver. To adjust the screw, turn it clockwise to lean the mixture (less fuel, more
Mechanical carburetors are operated with a manual choke and feature a simple design. These carburetors are less expensive and easier to maintain than other types of carburetors. Constant velocity carburetors, or CV carburetors, are operated with an automatic choke and feature a more complex design. CV carburetors are more expensive than mechanical carburetors but offer better fuel economy. Downdraft carburetors are operated with a manual choke and feature a simple design. Downdraft carburetors
If the plugs are fouled with too much fuel, they will be caked with wet, black deposits. If the carburetor is adjusted too rich, the engine will run sluggish and may "load up" with raw fuel if left idling for too long. The spark plugs will be fouled with wet, black deposits. If the carburetor is adjusted too lean, the engine will run hot and may "ping" or "knock." The spark plugs will be white or light-colored.
COPYRIGHT © 2019