Best Power Upholstery Staplers in 2022

Last update: November 26, 2022

Are electric staple guns more powerful?

Electric staple guns are more powerful than manual staple guns. They are also faster and easier to use. Electric staple guns are the best choice for most projects.

Are T50 and 140 staples the same?

T50 and 140 staples are the same in that they are both 3/8" crown staples. However, the T50 is a much heavier duty staple than the 140. The T50 is a 15 gauge staple, while the 140 is only an 18 gauge. This means that the T50 is much thicker and will hold up better under heavy use. If you are looking for a staple to use for heavy duty projects, the T50 is the better choice.

Are upholstery staples different?

Upholstery staples are different in that they are much larger and have a much wider crown than regular staples. This makes them ideal for use in upholstery, as they can penetrate thicker fabrics and materials more easily. They also tend to be more durable and resistant to rust, making them ideal for use in outdoor or wet environments.

Can I use 18 gauge staples for upholstery?

You can, but it's not recommended. 18 gauge staples are too thin and will bend easily. They also won't hold as well as thicker staples.

WEN 61705 20-Gauge 3/8-Inch Crown Air-Powered Pneumatic T50 Stapler for Upholstery and Woodworking Review:

This brad nailer is more expensive than some hammers! It's time to purchase a brad nailer if you own an air compressor but not one. I used this nailer to install all of the casing, baseboard trim, crown molding, and bed molding in our newly renovated master bedroom. It also includes oil! Never jammed, and I only needed to use a nail set on two or three brads (likely due to improper nailer angling).ordered it together with a pack of different brads. Love them too! (PowRyte Elite 18 Gauge by 1 to 2-in Multi-Pack Brad nails, 2000-Pack)PS: I also purchased the bedding, nightstand, and bed on Amazon (DHP Platform Bed, Dakota Faux Leather Tufted Upholstered Platform Bed - Includes Tufted Upholstered Headboard and Side Rails, Queen Platform Bed - White).

BeA 71/16-421 Fine Wire 22-Gauge Stapler for 71 Series or Senco C Style Staples with 3/8-Inch Crown and 1/4-Inch to 5/8-Inch Leg Length Review:

While there were other kinds of staple guns on the shelf, no one ever used them, and they were regarded as backups when I worked in a few different upholstery businesses as a teenager. Staples can be driven about as quickly as a gun can be fired without jamming. Even when mistreated, they never disappoint. I have frequently observed the top being used as a hammer to smooth out staples that were inserted at an angle, however I wouldn't advise it.

3PLUS H7116SP 22 Gauge 3/8-Inch Crown Pneumatic Upholstery Stapler for 71 Series or C-Crown Staples, 1/4-Inch to 5/8-Inch Review:

This gun for $35 is amazing, according to the original post after four days of use. It works perfectly and has for the past four days at my upholstery shop. It need #7 empire staples, which are the same ones I use in my shop. I'm debating buying another because I believe the price will increase once word gets out.The one aspect of the cheap rubber grip cover that I did not like. I cut it off since it seemed impolite and like it may cause a problem.So far, I've used roughly 1000 staples, and they work flawlessly.PS It resembles the Harbor Freight T50 pneumatic cannon in appearance. And I attach coil springs to frames with that one while using it as a loaner. also work well.Update,After multiple upholstery shop tasks, I'm still of the opinion that this gun is amazing for the money. Since I've had it, I've fired roughly 5000 staples, and it's been amazing.October 2019 UpdateI have used this stapler as my primary gun ever since I acquired it, and after almost three months and more than 15000 staples, it is still going strong. I have also suggested it to other store owners who are equally astounded by the cost and the fact that it can use typical Empire #7 staples. I should probably get a second one as a backup or in case I hire another upholsterer.

SENCO 6S0021N SFT10XP-C, 3/8-in 22-Gauge Fine Wire Stapler (Xtreme Pro) Review:

If the plastic feed tray weren't so likely to break from a fall of four to five feet, I would have given it five stars. The pistol I purchased for upholstery work operates flawlessly at 80 to 90 PSI. To my friends, I would unquestionably recommend any product made by Senco. If you use your air pistol as frequently as I do, be sure to pick up some Senco air gun oil and oil a few drops once a week.

Fasco F1B 7C-16 Fine Wire Stapler Review:

exactly as stated. delivered quickly thanks to Amazon Prime. lost a star since you have to hold up the small safety device button every time you shoot it. Despite using a previous model of this gun for over 20 years without a safety device, it started to leak, so I had to get this one right away. I'll attempt to fix it so that I have a backup. I'll be happy if the new one lasts as long. Absolutely will purchase this brand again. fantastic guns

Pneumatic Upholstery Staple Gun, 22 Gauge 3/8" Wide Crown Air Stapler Kit, by 1/4-Inch to 5/8-Inch, with 6000 staples Review:

I use it every day and am so far extremely pleased with this purchase because it does the job well. Despite being lightweight, it feels nicely crafted. Price was initially what intrigued me to it.

MT7116LN Upholstery Stapler-22 Gauge 71 Series 3/8-inch Crown C Crown 3/16-inch to 5/8-inch Leg Length Long Nose Stapler Fine Wire Stapler Review:

It is particularly sensitive to pressure. I strongly advise mounting a pressure regulator with changeable settings on the handle. If there is insufficient pressure, the upholstery is cut, and if there is too much, the cycle is not completed. But when the proper pressure is applied, everything works perfectly! All air tools have a recommended pressure setting, but this one is particularly crucial. As a result, we nevertheless highly recommend it because of its excellent performance and affordable pricing. After reading numerous other reviews, I was concerned, but it well surpassed my best hopes. Finding the appropriate settings only took a few seconds. I have never worked in upholstery. After receiving a $9000 estimate to reupholster my Crownline 225LPX boat, I was compelled to do it. I'm about a third of the way there. Without this nail gun, I would not be able to. FYI. I will complete it for less than $1000, which covers all of the upholstery, foam, glue, carpet, and this nail gun. (I didn't include pressure only because there are variances in regulators, lines, upholstery, staples, and gun design, so take this with a grain of salt. utilizing marine vinyl and 3/8 stainless steel I can put the compressor in another room so I won't have to put up with the noise because my regulator shows 95 PSI on a 6 horsepower 30 gallon 155 PSI compressor with 150' of standard line.

AIR LOCKER U630L2 22 Gauge 3/8" Crown ("C" Type) Long Nose (1-5/8") Upholstery Stapler Review:

Excellent quality

Can you use 1/4 crown staples upholstery?

Yes, 1/4 crown staples can be used for upholstery projects. They are small enough to go into tight spaces and will provide a good grip for your fabric. Be sure to test them out on a scrap piece of fabric before using them on your final project.

Can you use an electric staple gun for upholstery?

An electric staple gun is not recommended for use on upholstery projects. The electric staple gun is designed to shoot staples at a high rate of speed and with a lot of force. This can cause the staples to go through the fabric and into the padding or even the wood frame below. An electric staple gun can also be difficult to control, making it hard to avoid putting too many staples in one spot or putting them in crooked. A hand-held manual staple gun is a better choice for upholstery projects.

Do T50 staples come in different lengths?

T50 staples come in different lengths, but the most common length is 3/8".

How do I know what staples to buy?

When stocking your kitchen with staples, it is important to consider what you typically cook and eat. If you eat a lot of pasta, for example, you will want to make sure you have a good supply of pasta and sauce. Other common staples include rice, beans, bread, and cereal. Once you have a good handle on what you and your family eat on a regular basis, stocking your kitchen with those items will be a breeze.

How do you hide staples on upholstery?

If you're looking to hide staples on upholstery, one option is to use a staple gun with a long nose. This will allow you to get the staples close to the edge of the fabric, making them less visible. You can also try using a thinner gauge of wire, which will be less noticeable. Finally, be sure to use a color that blends in with the fabric; black or brown staples will be less visible on most fabrics.

Is a narrow crown stapler good for upholstery?

A narrow crown stapler is a great choice for upholstery projects. It's small size makes it easy to maneuver around fabric and the narrow crown helps prevent fabric from bunching up.