Best Power Tool Stands in 2022

Last update: November 27, 2022

ToughBuilt - Folding Sawhorse/Jobsite Table - Sturdy, Durable, Lightweight, Heavy-Duty, 100% High Grade Steel, 41.5-Inch, Easy Carry Handle (TB-C550) Review:


I purchased two of these sturdy, practical, and high-quality sawhorses. A sawhorse is something you need to be able to rely on being quite solid, and while many of the other sawhorses are made of plastic, that can be nice in some situations. This is the strongest of them all, and it has some nice little features, like an anti-slip surface on the top, a great carrying handle built into the top, adjustable feet on the legs (which is an extra, but well worth it), and slots for inserting boards at each end of the sawhorse (the boards go from one sawhorse to the next; once you lay plywood across everything, it creates a "table"—man, the versatility of this thing! I'm a woodworker (not as a trade), so mine are set up to create a worktable for cutting, assembly, painting, etc., then they're folded and put away until another need arises. If I were a contractor, I'd be able to trust the sawhorses' long-term durability (being thrown into the truck at the end of each workday, etc.). These sawhorses replace the plastic ones I previously owned; surprisingly, my search for them revealed that nearly every sawhorse on the market is subpar in some way. Among the rest, these by ToughBuilt stand out as unquestionably superior in every regard. They aren't excessively heavy, but they are unquestionably a good deal heavier than plastic ones, so if you happen to be fragile or infirm, you might want to examine the weight. Because of the quality of the product and the way it was constructed, I anticipate using it for the rest of my life.



DEWALT Table Saw Stand, Mobile/Rolling (DW7440RS) Review:


Oh sure, this is purr-fect! About a year ago, I found a fantastic price on a Dewalt portable table saw, and I've been using it ever since. I placed it up on a platform style ladder, which maintained it at a good height for operating. I was looking for something I could use with it that wouldn't involve a lot of lifting because I've had a couple back operations. Although the saw itself isn't particularly heavy, there are some days when lifting and carrying it are nearly impossible. All of that was taken care of by this saw stand! I am overjoyed with the gift my wife gave me for my birthday. It was simple to assemble. The instructions were a little ambiguous at first, but as I realized that the front and back of the stand were indicated on the labels, assembly wasn't at all difficult. The supplies were allen wrenches, and I assembled it in my living room while watching TV. The saw is directly mounted to it, although it is simple to remove when I don't need the stand or when I'm transporting it. The saw's bottom is still visible for simple cleaning. It takes up very little room in my workshop and folds up simply for storage and transportation. Anyone would benefit greatly from doing this, and it has saved my back countless times! I adore it. I'm not sure how I survived without it.



DEWALT DW7350 Planer Stand with Integrated Mobile Base Review:


What you get instead is a collection of components, bags containing different attachment bolts (all 13 mm), washers, and nuts, as well as a poor exploded diagram and some subpar instructions on a single small page. To understand what I mean, download the handbook.You'll need a ratchet and a 13mm socket to assemble this, which will take a very long time.Parts that are incorrectly labeled: The bolt bags are numbered 1, 2, but the manual lists them with the letters H, I, and j. As a result, each time you need one, you must first look up the requested bolt in the instructions ("O"), determine its size from the exploded diagram page, and then match the description of the bag's contents.Bad manual: Aside from the aforementioned "full-size" pictures of the bolts that, in theory, should match up easily, these pictures are NOT full-size. Yes, to scale, but doing so requires comparison. Even worse, when you attach the wheels according to the first set of instructions, you have to use the same carriage bolt on one side of each wheel when you join the legs, which requires undoing the work and starting over. The wheels also prevent a level work surface. DeWalt would be wise to place the wheel axle assembly in the leg part rather than the foot portion, and to wait to attach the wheels until right before attaching the MDF top and the support (metal) shelf. Only after I left the store and went online to search for the answer did I realize how long it took me to figure it out.The metal is strong and well-made. I had NO problems with alignment. It all seemed to fit. My standard procedure is to cross-tighten like tire lugs any bolts that connect together (say the four sides of something). This situation doesn't call for that. I could have saved even more time if I had known that when I first started.To make the task simpler, remove the washers and nuts that are already attached to the bolts beforehand and place them back in their appropriate bags. I could have easily saved 30 minutes by doing this.All you really need to do is line up the holes and bolt the planer to the stand because this DOES come with bolts to attach to your planer. Place your device so that its center of gravity is in the center of the MDF top if you have a different brand (or, like me, plan to use it as a drill press), mark holes or drill if possible, and then bolt it on.Although the leveling legs are a good addition, you must retract them in order for the wheels to make contact with the floor. The table won't move if they are leveling it. Although it seems obvious, a quick-release system or a lever to shift the wheels "to a down position" would solve the problem.Now that I've built it, I believe that at some point during construction it would be simpler to flip it upside-down and finish the build (up until the MDF top). It makes it simpler to get to bolts that are "within" or "underneath" items. If you have a flexible attachment or a 90 degree U-joint in addition to a driver, a 1/4" square head, and that 13mm socket, you could complete this task more quickly. Otherwise, most nuts are not accessible with a power tool.Numerous carrier bolts are present. It would have prevented me from pulling out the 13mm wrench and two-handing what could have been a one-man job. I'm not sure why they didn't use ALL carrier bolts.BRING A MAGNET. When you reach up to put the washer and nut on it, you can use it to "hold a bolt down," and the screw won't come out because it will grab both, making it easier for you to check that the nut is properly threaded. Additionally, you can use the magnet to hold the bolt in place while you raise the sides. After that, you can add a washer and nut to both bolts without the assistance of a second person to support the workpiece.It has weight. THD reports 57lbs. You might want to consider having a winch or a friend to help you move it to the floor if you're building it on a workbench.That's all I can come up with. If I've helped you save some time, then I've accomplished my goal.Tucson, Arizona, FAA CPL-H Ehud Gavron



Toughbuilt Sawhorse Adjustable up to 4 x 4 Size Support Arms 1300 LB Capacity Review:


To support work tables on-site, we were seeking for heavy-duty horses. We build a sturdy work surface that can support at least 1000 lbs by running two 2x4s across in the pockets made for this purpose and adding a 3/4" plywood top. The horses are sturdy and stable, and they have a few nice characteristics you won't find on typical wood or plastic horses, including: 1) 2x4, 2x6, or 4x4-sized pockets; 2) flip-down brackets to store stock for cutting (basic cuts only require one horse set up); and 3) a second set of flip-down brackets to hold sheet goods (again, only one horse need be set up for this).These weigh a lot and require some time to put up. We believe the advantages outweigh the disadvantages.



BORA Portamate PM-4000 - Heavy Duty Folding Miter Saw Stand with Quick Attach Tool Mounting Bars Review:


For almost a month, I've been seeking for a simple, affordable miter saw support. After growing weary of my DeWalt DW-780 miter saw lying on the floor all the time, I finally decided to buy this Bora. Now that I can keep my shop vac and a few other items underneath this, I can free up some space.The quality of this appears above average for what I would anticipate at this price after unpacking and some minimal assembly. Okay, so I would have preferred wheels, but I'd rather get something of decent quality for less money, and I can always add my own afterwards. Minor complaints: The paint is rather thin, and once your saw is installed, tightening the screws down will likely scrape through the paint. If moved regularly, I suppose it will likewise chip off over time. However, the general robustness and functionality are acceptable, so I won't complain. The primary rail in which one of the support arms is kept also doesn't quite fit it. I'm rather confident that it will slip in like the first one did if I get a rasp and file the swarf or solder splatter off the inside of the tube. The legs weren't entirely flat on the floor prior to the saw installation. All of this was balanced out by the weight of the saw on top. To fit inside the tube legs, I might still create some screw-out leveling feet, but that is a task for another day.The legs swing out for a larger footprint while down, but they come back up in line with the thinner saw mounting rails. I really enjoy how sturdy it is. Once stowed, the support arms are almost evident but give you about six additional feet of wingspan to support whatever you are cutting. Really helpful while working alone - The mounting hardware comes with three different lengths of bolts to handle various miter saw bed thicknesses. The directions are printed in clear, well-written English. with images.I put the saw too far forward the first time I attached it to the mounting rails, so I had to remove all the bolts and push it backwards. Getting the bolts out from under the clips and handles requires considerable dexterity. Using the upside-down is the least of it. I initially didn't notice the square shoulder beneath the head. It wasn't until I had fitted the saw twice that I discovered the directions had to be read backwards so that the square shoulder would line up with the square cutout in the mounting rails. *Sigh*. Now that I've finished writing this article, I can go ahead and remove them all and reinstall them in the proper order. I also wouldn't have needed to use the grinder to take one down if I'd done it correctly the first time. We can only hope that this will prevent someone else from making the same error!Overall, I believe this to be a nice purchase given the cost. In my future store, I may upgrade to a better arrangement with integrated dust collection, but for now, this will work in my flat.



Rockwell RK9034 JawStand XP Work Support Stand Review:


The positive: More durable than a standard work stand. Nice features include a clamping and tilting head, a height adjustment crank, and an integrated height guide.The crank for fine-tuning height adjustment is my favorite of these. Like the rollers/supports on a miter saw stand, it might be difficult to adjust the height of your material supports. Typically, estimating, checking, and readjusting the height till it is close enough is how stands are typically set. With this stand, you may use the primary height adjustment to bring it reasonably near before turning the crank for the precise, last adjustment.The drawback: The tilting head's clamp and "locking" knob don't hold up all that well. But they probably will function in the majority of cases.The stand's side height markings appear to be wrong by a half-inch. The heights marked on the side should be to the top of the stand, one would believe, with the fine-tuning height adjustment set at zero offset, however they appear to produce a reading that is wrong by an inch. I haven't worked out what went wrong yet, but I won't rule out the potential that I misunderstood something or made a mistake in my measurement.I was seeking for a work support platform to help support materials on my table saw, miter saw, etc., such as 4x8 sheets of plywood or extra long dimensional lumber. They have special 3-in-1 stands for this, although the most of them appear to have received negative reviews. Therefore, I decided to use a Rockwell RK9034 JawStand XP in combination with a scrap 2x4 and some roller bearings. Although it cost a bit more than purchasing the 3-in-1 supports, the whole tool set is far more durable and adaptable. You can find the roller bearings I used here:TruePower 6" Roller Ball Transfer Bearings



Metabo HPT 115445M Portable Folding Sawhorses, Heavy Duty Stand, 4 Sawbucks, 1,200 Pound Capacity, Built-In Cord Hooks and Shelves, 2-Pack Review:


Yes, they are practical, strong, affordable, and well-engineered. I particularly enjoy using the saw bucks to cut lengthy pieces of 2x4 and 4x4 by placing a few saw horses end to end. To make cutting easier, I typically clamp the timber to the sawbucks before clamping the horses to the sawbucks. There is nothing worse than trying to cut unstable lumber...Although I haven't tested the 1200 lb load limit, I have loaded them up to about 500 lbs without bending the legs.The legs' limited aperture in this scenario allows them to support more weight.Once more, physicsIf necessary, I can simply place a bag of sand, a few bricks, or anything else heavy on the shelf in between the horse's legs to increase its stability.This is merely another trade-off for the low cost and convenience of plastic sawhorses, as all of them are prone to falling over when used in certain ways.They remain my favorites, which is why I bought 8 of these Metabos.Additionally, they are American-made.kd



AmazonBasics Folding Sawhorse - Set of 2, 900 Pound Capacity Review:


Making new sawhorses out of hefty 2x4s and fresh metal hinge/clamps every two to three years was a must for me because I live in an area where termites consume even pressure-treated lumber (the old ones rust away). The new ones include built-in hangers and a shelf and are stronger, collapsible, rustproof, and termite proof. Also ingenious are the flip up stops that keep objects from falling off the horse. I'm awarding these the full five stars. I am ecstatic about them. They are so light and portable that my granddaughters have already borrowed them to construct a picnic table outside.



BLACK+DECKER WM425-A Portable Project Center and Vise Review:


You normally get what you pay for when people say that, but in this instance, it also applies positively.This small workbench is excellent. It was incredibly helpful, and I used it for a few hours.Regarding stability: This portable work bench was actually a lot more stable than I had anticipated. I particularly value the huge step platform because it gives me a wider range of foot placement options when using my hand plane. That, in my opinion, is crucial for good ergonomics. I found it to be rather difficult to maneuver around a piece when your foot is constrained into one place, which is something that some other work bench/platform options don't give. To keep the most comfortable working position, you had to periodically move your component and clamp it down once more. Large step areas significantly lessen that problem. Not fully, but unquestionably superior to similar rivals. Step platforms on both sides would have been good. For it, I would have added $20. (Are you listening, Black and Decker?) So doing would strengthen the basis even more for a more stable surface. The folded footprint would not change despite the fact that it would be slightly longer when folded up because the width would remain unchanged.On the Work Surface: The majority of people concur that bamboo is significantly softer than a hardwood like oak or birch. However, only the inner pulp is true of this. The grass's outer layer is incredibly durable and robust, often harder than the majority of readily accessible hardwoods. Fortunately, that section of the bamboo stalk is laminated with the outside surfaces of the three wooden panels that make up the surface of this portable workbench. They are hence remarkably sturdy. The lighter-weight center is made from the bamboo's softer parts. All three boards are sufficiently stiff for the majority of applications, but I highly doubt they will be able to handle the whole 550 lbs of the load rating, nor do I believe that this is implied by the load rating. Typically, it is a maximum dispersed load. The narrowest slat (the clamping slat), which is where the majority of my 130-pound frame rests, will bend a little bit—between 1/8 and 1/4 of an inch—if I were to stand on the foot rest and lean heavily against it. This exceeds my expectations in every way.In terms of fit and finish, this is one area where I was not shocked. The price is most clearly reflected in the fit and finish. I'm really happy with how well the device works. Precision was what I didn't get. Of course, precision typically entails high cost, and in this case, the workbench is really affordable, so I did not anticipate high precision. While the painted metal and wood surface finishes were outstanding, the metal frame's surface edges weren't. To the touch, they were all extremely rough. Fortunately, I haven't been cut by any edges yet, but it feels like it might. Additionally, the assembly lacks tolerances throughout the entire device. For instance, when fully closed, the clamping bamboo slat did not completely line up with the neighboring slat. It was 1/32 "higher. All of the moving elements are a bit loose to manipulate. Both the release lever bar and the clamp knobs are quite flexible. However, everything is fine when things are locked and restrained. This is the most crucial component, and I'm happy they made sure the items remained in place. The platform and legs are equally sturdy when secured into position. The springs that are connected to the levers that fold and unfold the device were one small problem I did run into. They hurt me. You might accidentally spill some of your own blood if you're not careful. I used my needle nose pliers to quickly make the spring's ends less protruding by bending them. Just a brief hint, though.'Made in China'?"I am aware that many have said that the older models are stronger, but in today's world, where nearly everything is produced abroad, you get what you pay for. If it had been available, I would have willingly paid the extra $50 if this device had been built in the USA, if only to support my fellow citizens. In actuality, though, this tool is more than suitable for occasional DIYers or novice woodworkers, and for the money, it's a great deal. Due to the clamping mechanism's use of plastic, I don't anticipate this lasting forever. However, the clamp's design is rather clever, and I believe the plastic pieces were chosen for reasons other than cost-cutting because they offer smoother operation than a cheaply cast metal portion would. A clamp would need to have extremely high tolerance for smooth functioning if it were to be made entirely of metal. That is an unreasonable expectation at the street price of $110. One final, crucial aspect. Regardless of where something was created, I usually attempt to buy the best, and I'm glad to say that I think I succeeded this time. There isn't a product out there that performs as well as this one, in my opinion. It was a terrific purchase for my needs in terms of what its design delivers.Pros/Cons:Pros:s-Stables-Compact.-Lightweight.- High quality materials (mostly).Enough clamping force for woodworking.Excellent engineering. extremely user-friendly. Torque release springs in the clamp avoid overtightening. When the unit is folded up, the bench dogs stay because they snap in semi-permanently.-Best value and price.-extremely simple to put together. 90% of it is already assembled. Actually, all that's needed is a work area and clamp knobs. There are only 6 bolts in total. I'm done now. If you are unable to do it, you should generally avoid using any tools.Cons: Fit and finish could be better; there are some rough edges, but thankfully not where it counts.-Tolerances could be improved. There was a 1/16 gap between the clamping surface and the work surface "upper.-The clamping mechanism uses plastic components.UPDATE 8/22/15: You need it!Five months later, I've realized that this little guy has evolved into a crucial tool in my shop. The additional freedom it provides (moving the clamped component) over my two enormous Gladiator workbenches (8' each with bench vises and woodworking clamps attached) has come in handy numerous times. I use it so frequently that I no longer even bother to fold it. It only returns to its storage location when I require the additional room. When working on bigger or irregularly shaped projects that call for me to move around more, this bench has become my "go-to" one. Comparable to reclamping in ease.But more importantly, I use it whenever I need to do something a little more destructive because I want to protect or minimize wear and tear on my main workbenches. I understand that those workbenches were made to withstand abuse, but if I had to choose between leaving burn, glue, or paint marks on a workbench that would last forever and a replaceable cheapie, I would choose the cheapie:)This item is essential for every DIY workshop.