Bosch angle grinders are good tools for grinding and cutting metal. They are durable and have a variety of features that make them ideal for use in a workshop or on a construction site. Bosch angle grinders are available in a variety of sizes and power levels, so you can find the right tool for your needs.
Angle grinders are a versatile tool that can be used for a variety of projects, including cutting concrete. When cutting concrete with an angle grinder, it's important to use the right type of blade to avoid damage to the tool and to ensure a clean, even cut.
You can use your angle grinder as a sander, but it is not the ideal tool for the job. Angle grinders are designed to cut and grind, not to sand. The abrasive discs that they use are not as effective as sandpaper at removing material from a surface. Additionally, angle grinders can create a lot of dust and debris, which can be a health hazard. If you do use your angle grinder as a sander, be sure to wear proper safety gear, including a dust mask and eye protection.
An angle grinder is a versatile tool that can be used for a variety of projects, including cutting, grinding and polishing. While angle grinders are mostly used on metal surfaces, they can also be used on other materials, including wood. When using an angle grinder on wood, it's important to select the right type of disc. Abrasive discs are not suitable for use on wood, as they will quickly damage the surface. Instead, opt for a disc designed for use on wood, such as a carbide-tipped blade. It's also
2-position removable side handle provides increased comfort and control
One-Touch Guard allows for a single action to adjust the guard
5/8"-11 spindle thread accepts a wide range of 4-1/2" accessories
7.5 Amp AC/DC, 12,000 rpm motor designed for faster material removal
My background is in the trades, but nowadays I mainly work on sophisticated DIY projects at home. Due to my experience with heavy-duty tools, I naturally gravitated toward the larger 11 amp version (DWE402), but after some thought, I determined a 7 amp model would be more than sufficient for my needs. I was happy with my choice. There is the ideal ratio of weight to power. Within two days of it arriving, I used it to cut piping, and since then, I've completed a tiling project. It feels great, and it performs well. Since it offers many of the same features as the larger models, I didn't feel like I was making a sacrifice. The 11 amp version, in my opinion, would be far too powerful and hefty for non-commercial use. This is more than powerful enough. Changing discs is much simpler with the spindle lock and Allen key than it is with the conventional 2-prong wrench (the hub does have holes for those that prefer the wrench, but only the allen key is included). For those who are unfamiliar, an Allen key is not used to unscrew anything in the conventional sense; rather, it simply offers superior leverage and a more practical and effective means to engage the hub while removing and replacing discs. Once the hub is positioned against the disc, you usually just need to turn the spindle lock a quarter turn to tighten or loosen it.The last grinder I owned had a slide-switch, which was typical in those days but is now considered to be fairly risky. The paddle switch on this one was crucial to me (to think there are still hand-held power tools that will stay running if you remove your hands is crazy).I don't always stick with a particular brand; instead, I choose a manufacturer based on the tool. I've used power tools for a very long time, and I think Dewalt is a strong brand for cordless drills, miter saws, and grinders. For my corded hammer drills, reciprocating saws, circular saws, etc., I picked other manufacturers. Overall, I believe this to be a fantastic tool at a fantastic price. I would advise the 11 amp version if I were still in the trades or if you want to use it for demanding all-day operation, but I am extremely happy with the DWE4012. It does not come with CDs or a case, according to the item specifications. Any large box store will have 4-1/4" discs that are suitable for the material you are cutting or grinding.NOTICE: I paid full price for this item on Amazon, and I have no connection to the vendor. Because I read reviews before making my own purchasing decisions, I make an effort to produce evaluations that are informative, objective, and insightful. I have seen that many reviews lack useful information, are poorly written, or give negative evaluations because the reviewer did not read the instructions or the product specifications before making a purchase. Giving back by writing insightful reviews is beneficial.
No load speed: max 9, 000 RPMs
DEWALT Brushless motor: delivers up to 57 percent more run time over brushed
*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
Blade brake: brake engaged when paddle switch is released, bringing the wheel quickly to a stop
Warranty: backed by DEWALT 3 year limited warranty
Battery & Charger Sold Separately
My 20v DeWalt tools were greatly improved by the addition of this angle grinder. There isn't much to say in this review that isn't already on YouTube and other similar websites.I will say that the 2AH batteries will only provide you with short run times. When using this with a 2AH battery and a cutoff disk, the grinder would repeatedly jam while I was cutting aluminum sheet metal (almost like a lack of power). The same problem existed with the 2AH batteries (I tried 2 different ones, both of which were fully charged). The tool had significantly more power and had no problems after I changed to the 5AH battery. I suppose this is a disadvantage of battery-operated grinders... For me, it's not a big deal because utilizing a cordless angle grinder has several benefits that much surpass the minor drawback of the 2AH battery.This is an essential tool. Grab a battery with at least 5AH as well.
Quick-Change Wheel Release allows for tool free wheel changes
*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
8,000 RPM motor provides high power for cutting and grinding applications
2-position side handle for greater control, comfort & versatility
2-finger trigger switch with lock-off button
Battery & Charger Sold Separately
Even though I've had cordless drills and saws for a long time, I've always used corded hand grinders. As soon as this was delivered, I went out and purchased a diamond cutoff wheel and got to work. When replacing a toilet, the first task was to cut off a damaged steel closet flange. Done. The steel supports that held upwind trees upright were then taken off. Otherwise, a saw or cutting torch would have been employed. The meow is diamond cut off wheels. Expensive at $13, but cutting a single post does not require changing worn abrasive wheels five times.This grinder was a steal at the asking price. I suggest it.Let's find out how long this gadget lasts now. Battery-powered portability still has a steep price tag. However, you may save a few hard-earned dollars by using reliable aftermarket batteries (found here). Even if the price of Li-ion cells has significantly decreased, Dewalt, Rigid, and Milwaukee all receive huge sums of money for their batteries. As a home owner and enthusiast, I rarely use my cordless tools. Even though I could buy dozens of their tools for the price of one of these, I quit purchasing Harbor Freight's chinesium battery-operated equipment a long time ago. These were functional but had short lifespansâ€”mostly trash batteries. Ever since I made a fortune in the market, I've been purchasing Milwaukee and Dewalt. never turned around. Until I realized that Sears was in trouble, I was a Craftsman Tool fan. I'm now unsure of how long replacement components will be accessible. Up until recently, I could still order components for a Sears-Southbend lathe that was 65 years old. OK. The grinder is the subject here. I'm hoping I outlive it so my wife can pass it down to an heir.
Lock on/off feature for continuous operation
Powerful 7.5 AMP motor for high output power in a more compact tool (only 4.5 pounds)
Protective zig zig varnish seals the armature from dust and debris for longer tool life
Extra large paddle switch for comfortable operation
AC/DC switch for use with alternative power source
Small diameter barrel grip (only 2 to 1/2 inches ) for added comfort
Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life
I wanted to make clear any misunderstandings about what is specifically provided.It includes:(1) Side Handle Grip (1) Angle Grinder 9557PB (1) Guard of type 27 (1) Type-1 guard, a case, five Makita grinding discs for steel or stainless steel, one Makita diamond blade, as well as the owner's manual.Aluminum makes up the case, while the latches and fasteners are zinc-coated. They ought to rust quickly. However, I don't want to lubricate up these locks since I wouldn't be able to open the box. I spray nuts and bolts on floor jacks and other zinc hardware to prevent rust. Well, it's still preferable to a cardboard box.The case contains harder rubberized foam with cutouts for the tools and separate cutouts for each disc, as well as eggcrate foam on the lid. excellent defense for brittle wheels. I also appreciate that the lid does not open all the way. After flinging the lid open and having it hit the floor a thousand times, it slightly exceeds vertical and ceases protecting the lid from damage.I'm a big admirer of M*lwaukee and R*dgid, thus this is my first Makita. It works well and is quite affordable. Without batting an eye, it devoured a Br*nks R70 disc-lock. Due to its diminutive size, I was able to slide behind the oddly shaped lock (enclosed hasp) that was pressed up against a corner and easily break the lock with one hand. I have a 7-inch R*dg*d angle grinder that is way more powerful and dangerous, but because of its size, I just could not have finished this job with it. Another example of using the proper equipment for the job. Here, smaller is preferable. I'll concede that it lacks the strength of the big guns, but I'm not slicing through 2" of foundation. Additionally, I don't melt extension cords or flip breakers frequently.The bundled grinding wheels outperform the Horrible Freight discs and can handle both mild and stainless steel. Because the included discs make the tool work so smoothly, they must be precisely balanced. Most likely, the recent grinder and narrow diameter had an impact.It can lock-on with a push button located close to the base of the paddle or operate with a dead man's paddle switch with lock-off. Nice touch. Overall, this grinder is a terrific addition to my toolkit, and I regret not getting it sooner. I might purchase another. It's a fantastic tool, and I wouldn't settle for anything less from a company that manufactures tools at the top of its game.Although I haven't yet moved teams from Milwaukee, this little gem has definitely caught my eye.P.S. If you value your vision, put on a face protection. Only wearing safety glasses won't do. Put both on. with long sleeves and gloves.
Durable ball-bearing construction improves balance, reduces vibration, and ensures a longer life
Commercial Brand: Ingersoll-Rand
Powerful motor delivers 0.25 HP (0.19k-Watt) at 21,000 rpm free speed
Imported from: China
Many of the master technicians urged me to spend more money on this particular brand and model when I first started working at a garage. They all have one, and many of them have been there for a while but still act like they just arrived.This is the second IR 301B I've bought (this is a gift to my father). This grinder is strong, long-lasting, and incredibly simple to operate. This one is my favorite because of the angle. I won't purchase another grinder. Nothing finer will be available for such a fantastic price. If anything, Matco is more equivalent, and let's not even talk about Snap-On.This die grinder is the best I've ever used, and it's a fantastic price.
Spindle lock for easy accessory changes
Metal gear case for durability and longer life
3 Position side handle provides added comfort and control
Included Components: 4-1/2" Small angle grinder, Metal grinding wheel, Spanner wrench, Wheel Guard
I purchased this with the purpose of using it to cut open a U-shaped "kryptonite" bike lock. I purchased the 5-pack of cutting wheels that Amazon mentions are typically used in conjunction with the grinder as it only comes with a grinding wheel. I regret not taking another reviewer's advise, who noted that the grinder's instruction manual specifies that only a Type 27 disc should be used, as opposed to a Type 1 disc, for safety reasons. Evidently, it has to do with how the wheel is positioned within the guard housing. Sadly, the regularly purchased 5 pack of wheels does not provide a good image of the wheel and the "Type" number is not mentioned in the description. The wheels are in fact labeled Type 1 now that you have them. I just ordered a cutting disc of type 27. The Type 1 and Type 27 cutting discs have the same 4.5 inch diameter and 0.045 inch thickness, thus it is simple for the uninitiated (like myself) to conclude that they are the same size. However, after doing some study, I discovered that the Type 27 has a raised section in the center, which makes it sit lower in the safety guard, whereas the Type 1 is a flat disc.
Multiple handle positions: right, left, top
No-volt switch to help prevent accidental restarts following a power disruption when the tool is left in the "on" position
Tool-free guard change for easy changes and repositioning
Integrated spindle lock for fast and easy wheel changes with a single wrench
Soft start for smooth start-up
Although it is not an industrial-grade instrument, this is acceptable and even desired in some circumstances. Because it is both substantial enough to complete the task and compact enough to not overwhelm a novice or occasional user, I got it for my son-in-law. Good option for anyone who doesn't require the Dewalt's high power and longevity. Additionally, the pricing is reasonable enough that you won't regret your first investment if you wish to upgrade to additional power.
An angle grinder is a handheld power tool that can be used for a variety of applications. One of the most common questions people ask about angle grinders is whether or not the RPM (revolutions per minute) matters. The answer is yes, RPM does matter when youâ€™re using an angle grinder. The higher the RPM, the more powerful the angle grinder. This means that a higher RPM will be able to cut through tougher materials. However, itâ€™s important to note that a higher RPM also means that the angle grinder will be more
No, the wattage of an angle grinder does not matter.
A 5 grinder can cut to a depth of approximately 2 inches.
Angle grinders are a versatile tool that can be used for a variety of projects, from cutting through metal to polishing stone. But how long do angle grinders last? With proper care and maintenance, angle grinders can last for many years. The key is to clean and lubricate the tool regularly, and to avoid using it for tasks that it wasn't designed for. For example, don't use an angle grinder to cut through concrete, as this can damage the blades. When used properly, angle grinders can be a handy tool that will last
A Dewalt grinder uses between 4 and 6 amps.
If you are using a standard 7" angle grinder, it will take approximately 8 amps to grind concrete.
COPYRIGHT © 2019