Best Post Hole Diggers in 2022

Last update: November 28, 2022

Can you pour dry concrete in a post hole?

Yes, you can pour dry concrete in a post hole. Dry concrete is easier to work with and will set up faster than wet concrete.

Can you use an auger in wet soil?

Yes, you can use an auger in wet soil. The auger will drill through the wet soil and help you to plant your garden or lawn easily.

How deep can you dig with a post hole auger?

Most post hole augers can dig holes that are about 3 feet deep.

How deep should a 16 foot post be in the ground?

A 16 foot post should be buried in the ground at a depth of at least 2 feet.


Bully Tools 92539 Steel Tamping and Digging Bar, 68-Inch Review:


That is a monster! The point of impact can be controlled if you have the strength to do so. In my backyard, I was putting in post holes when I came across a few roots that were up to two inches thick. I also used it to smash a few sizable rocks. After breaking some (Quartz and Sandstone) rocks, I ran into another sizable root. I dressed the end with a 4 inch angle grinder before tackling the root. The tamping head performs admirably on both dry and wet soil. The tamping head will become jammed with mud if the ground is overly damp. Even with a layer of muck placed on top, it still compacts beautifully. I'll never use this thing up in my lifetime, but if I did, I'd immediately buy another.



MTB Fence Post Driver with Handle, 18LB Grey. Your Best Garden Partner! Review:


I used to use a step ladder to ascend and use a sledge hammer to drive poles into the ground. That was really uncomfortable, particularly if the ground wasn't flat. Later, I witnessed someone using one of them. It is a lot simpler. And also safer. In my 68th year. I wish I had known about these sooner.Before standing the sledge up, slide it over the post, as another reviewer advised. Most people should use the 12-pound sledge, unless they regularly move heavy objects.This is really durable and ought to last forever. Mine is mine to pass on to my descendants.



Union Tools 78002 Carbon Steel Post Hole Digger with Hardwood Handles, 58-Inch Review:


Affordable costs for small-scale DIY projects in the yard. I only wanted to dig eight post holes for a privacy fence around my patio, so I didn't want to spend a fortune on the best post hole digger, but I also didn't want to skimp on quality either. I chose this one after considering my options, and it has been helpful. The only issues I have are a few sore muscles. I should note that the soil in which I used this digger had few pebbles and no roots to contend with, so I cannot speak to how it would fare in a more demanding test. However, based on my own experience, I am content with this post hole digger.



Yard Butler RD-2 30-Inch Roto Digger (Older Model) Review:


I only used this digger for one purpose: aerating the yard. Without aeration, grass cannot grow on red clay because it compacts readily. Renting those large, heavy equipment is fine, but I wanted something like this, and it's great.Please add young trees to the list of Bye, Byes, as of May 17, 2012. The Red Bud Trees have started to reach a height of 1 to 2 feet and are now able to firmly root themselves in the ground. They were destroyed after a few turns and without any bending or backaches thanks to my Yard Butler attack. This gadget continues to make me happy and is always available for use.The need to stoop down is lessened by the length (30"). The hole diameter is superior to the smaller varieties and performs admirably in the majority of soils. Rocks are a pain, and the Yard Butler will stop when they are too thick or unworthy of interfering with the drill's capabilities, depending on the torque setting on the drill. Perhaps digging it out would be more effective if the rock was too big. My philosophy is to dig as far as you can and let everything else work itself out. When I first started drilling in the yard, I focused on bare patches and made holes that were 2 to 3 inches apart to cover the holes. In order to lessen the compaction, return excursions included inspections to discover more fragile grass areas. All is well thus far. The drill doesn't appear to have much wear yet.The "weed attacker" elements of this gem are its finest feature. Turn on the drill after placing the point on the weed's crown. All I have to do is remove the weed from the tool once the tool practically coils the weed onto it. The weeds and the roots are gone. I have only used this so far on a few dandelions and largely chickweed. The majority of the dandelions were removed by earlier weed killer sprays, but like MacArthur, they will come back.Excellent tool for the purpose for which it is intended. Thank you for easing my burden a little.



"Ames" 2917600 Planting Auger Review:


I have planted more than 1,000 bulbs with this specific auger; it is quick and simple and the only way to plant a lot of bulbs! Drill down, stick a bulb in, kick the soil back in, tamp down, and you're done. This method works amazing and saves a ton of time. or drill several holes at once, put the bulbs in, cover, and finish! even better, have one person drill while the other person plants! The squared end that goes into the drill cracked off after a while, which was a little problem given the amount of power and torque used on it. Just reground a new square, and you're ready to go! One thing to keep in mind when using this or any auger is that if you get caught in a rock or a tree root, it will stop dead in its tracks and twist your wrists and arms to hell! If you are only planting in garden beds, it's a piece of cake, but be ready for this if you know you will come across roots or rocks because it can and will damage you. One thing I did to avoid damaging my wrists when working around roots and rocks was to lock the drill's battery end between my knees while still gripping it with a death grip.



Fiskars 60 Inch Steel Posthole Digger Review:


Using 26 4x4x8 treated posts, I used it to build a fence around my corner lot property. Each hole was dug at least 36 inches deep, and some were even 48 inches deep to accommodate drainage gravel at the bottom ( I used sand instead of concrete to set the posts). About 25 post holes had been drilled when the swivel started to come away. It only became a little unsteady; it wasn't broken. I was diligent and completed the task because I only needed to dig one more hole. I suggest it to everybody who asks since it's a great tool.I'm in south Texas, and for about 2 or 3 feet around me, the earth is clay. I learned a trick: dig the first six inches of the hole with a shovel, fill it with water, and then move on to the next hole and repeat the process. So, I returned to the first after filling the fourth with water. I dug a little more than 1.5 feet of the now much softer clay with the Fiskars Post Hole Digger. Much simpler than doing each one individually. I repeated the technique of filling the hole with water for the final push after digging 1.5 feet. I built the entire fence by myself, working on 3 to 5 holes each day after work. I've never constructed a fence before, but this tool was invaluable. Even roots as thick as 2 inches might be removed with just one chop.



Bully Tools 92382 14-Gauge 5.5-Inch Post Hole Digger with Fiberglass Handle Review:


With a 50-pound digging bar to break up rock and tree roots, I bought this to dig about 20 post holes along our property border and close to the road. It is well made and a lot more durable than our previous 6 inch post hole digger with a wood handle. Through the clay, tree roots, and rocks with no problems, I excavated three and four foot deep holes to set heavy strength 6 inch treated wood fence posts. My only issue is that once you are several feet down, the handles cannot stretch apart enough to "clamp" the soil to lift it out of the hole. Nevertheless, it is well-built and functions just as well as any other post hole digger.


How deep should a 8 foot post be in the ground?

A 8-foot post should be set in the ground at a depth of at least 2 feet. This will ensure that the post is secure and will not topple over in high winds or under the weight of whatever it is supporting.

How deep should a post hole be?

A post hole should be at least 3 feet deep so that it can support the weight of the fence.

How long does it take to dig a 6 foot hole with a shovel?

It takes a long time to dig a 6 foot hole with a shovel. I would estimate that it would take at least an hour, if not more. It all depends on the type of soil and how hard the ground is. If you are digging in sand, it will be a lot easier and faster than if you are digging in clay. Also, if the ground is frozen, it will be much more difficult to dig.

How long does it take to dig a post hole with an auger?

It takes about 15 minutes to dig a post hole with an auger.

How much can one man dig in a day?

How much can one man dig in a day? This is a difficult question to answer as it depends on a number of factors, such as the type of soil, the type of shovel, the weather conditions, and the man's strength and endurance. Generally speaking, however, most men can dig between one and two cubic meters of soil in a day.

Is a one-man or two-man auger better?

There is no definitive answer to this question as it depends on the specific needs of the individual. Some people may find that a one-man auger is more than sufficient for their needs, while others may prefer the added power and stability that a two-man auger offers. Ultimately, it is up to the user to decide which type of auger is best for their needs.