No, all pool hoses are not the same. Some are made of different materials than others and some are designed for different purposes. For example, there are hoses made specifically for vacuuming and hoses made specifically for backwashing.
There is no definitive answer to this question as there are many different types and sizes of pool vacuum hoses on the market. However, many pool vacuum hoses are designed to fit standard pool vacuum heads, so it is likely that you will be able to find a hose that is compatible with your vacuum. If you are unsure, it is always best to consult the manufacturer of your vacuum or the retailer where you purchased it.
Yes, you can connect two pool hoses together. This can be done by using a hose coupling or a hose connector.
A rubber hose can be used for a pool filter in a pinch, but it is not recommended. Rubber hoses are not as durable as other types of hoses and can break down over time. They are also not as effective at filtering out debris and dirt.
4.5/5
1.5†suction ports for compatibility with all automatic pool vacuums
Male/female connections at either end for versatile configuration
Works great for aboveground and inground pools.
Comes with 5 hoses at 3 feet long each - combine several hoses to customize any length you want up to 15 feet!
Maximum durability and flexibility of hoses allow you to wind hose, store anywhere, and save space.
$234
I was about to give these back. My Zodiac MX8 is mine. The Zodiac hoses are ridiculous. The pool shop where I purchased it wanted $28 per section, but I only required 8 to 10. Run the numbers. For the price, I purchased these, however they did not fit. I then began the return. Then I discovered a $18 adapter that Zodiac offers. It succeeded. Therefore, as of right now, my pool vacuum is operating great with hoses that are more affordable. These are the best if you have a zodiac and don't want to spend any money. I'm hoping to be able to include a photo of the connections. The adapter is inserted into the new hoses and the leaf catcher.
4.4/5
Heavy Duty - Pool hose is reinforced with polyester yarn to prevent leaks and tears for durable use. High pressure resistance, weather and chemical resistant, aging resistant, wear resistant, ideal for water transfer.
Hose Details - Hose Length: 50feet; Inside Diameter: 1.25 inch; Working pressure: 90PSI; Temperature Range : 23°F to 149°F (-5°C to 65°C); Scope of use: In-ground and above-ground pool equipment.
Easy to Use - Pool backwash hose can be easy to connect to the pump, and after using, easily flat rolled up and store in a dry place out of direct sunlight for storage. Hose fits 1.25 inch diameter hose fittings, hose measures about 2 inch when flat.
Satisfaction Guarantee - Our aim is to provide consumers with more practical and durable hoses. Any questions about the product, please CONTACT US. We will reply you within 24 Hours and solve your problems until you’re satisfied.
Pool Supplies - Swimming Pool discharge and backwash hose is made of PVC material, PVC material is resistant to abrasions and corrosion. Essential pool supplies as pool drain hose, pool pump hose, pool filter waste hose.
$234
After using it just once to backwash my pool, this 100' long hose seems to be of high quality and durability. I anticipate it to endure for a very long time. In order to make it simple to attach and disconnect the hose from my pool filter discharge line and store it when not in use, I also bought some 2" diameter camlock fittings and hose clamps to use with the hose.The fact that it is made in China, which is the first thing you notice printed on the hose when you unwrap it, is the sole reason I gave it four instead of five stars.
4.4/5
PROTECTED from UV rays and Abrasion
UNIVERSAL FIT fits most automatic pool vacuum cleaners. Including but not limited to Kreepy Krauly, Baracuda G3/G4, Kreepy Kruiser, Great White, Kreepy Classic, Hayward Navigator, Pool Vac Ultra, Aqua Bug, Polaris ATV and More!
48" LENGTH EACH don't waste money getting smaller length hoses!
DURABLE made of high quality materials with manufacturer designed thickness, don't waste your money on cheap knock-offs!
EASY TO INSTALL designed to fit together with existing pool cleaner hose, get the exact number of hoses you need for your pool!
$234
I bought a six-pack of these in August and replaced my whole hose with the exception of one section that needs to be shorter in order to achieve the precise length I require for the size of my pool. I haven't had any problems with leaks, breakage, or piece separation, and my vacuum head hasn't come off either. The components did not fit as readily as my old hose, but they did fit together well. I allowed them to soften in the sun on the pool deck so I could put them together with the greatest and tightest fit possible. My only issue is that, due to the extremely tight fit, I am unable to twist the hose pieces at the connectors in an effort to "retrain" the sweeping pattern. My hose needs this done every few months, or else it doesn't completely clean the surface. I don't want to have to disassemble everything, rearrange the parts, and hope that it bends differently than the hose is used to doing it in the freezing conditions. But I can make this work because I needed hose right now and this is what my budget allowed.on 8/16/19, EDIT/FOLLOWUP I wanted to let you know that these hose components are still in good condition; they have no leaks or holes, and they have completely held together. I'm impressed and grateful that this little item has endured for such a long time. Absolutely worth the price.
4.3/5
Flexible spiral wound hose w/Cuff
Brand: JED Pool Tools, Inc.
Deluxe filter connection hose
Item Weight: 0.78 lbs
$234
I was concerned that this hose wouldn't withstand the pressure of my pool pump because it seemed thin and weak. I went to the pool store and discovered that the price for a hose was double what it should have been. To repair a broken hose, I gambled and ordered one of them. I'm glad I did since I'm so pleased with it that I have got another one to replace a hose from the pool store that's almost destroyed!
4.3/5
Feed hose replacement
Also fits Zodiac Polaris pool cleaner models 480 PRO, Vac-Sweep 380, Vac-Sweep 280, 280 TankTrax
Fits Zodiac Polaris pool cleaner models 180, 380, 280
Measures 10-Feet length
$234
To replace the hoses on my Polaris that were at least 15 years old, I bought three of these. The new hoses are so much more flexible than the previous ones, I can hardly believe it. The Polaris was continually getting tangled, getting stuck in corners, going in circles, and driving on its side because the original hoses were so stiff. I removed everything from the pool out of irritation for a few months, vacuuming it solely by hand, until I saw the other reviews for this product.As stated in other reviews, my Polaris is operating more effectively than I can recall. Since I fitted the new hoses, it hasn't become kinked or stuck, and the pool now appears clean. Because the line hadn't been enlarged before, I found it a little challenging to install the hose swivels. I assisted with their assembly by using some PTFE lubrication. On initial assembly, a little low heat from a blow dryer or heat gun might also assist to slightly inflate the hose, but I didn't attempt that.My one caution is that you can find these exact hoses on PoolZoom for around $5 less per section of 10 feet, but I'm still delighted with the pricing because it's far less expensive than purchasing them from a nearby pool supply shop, where the costs are practically extortionate. Although PoolZoom allows you to use your Amazon billing information to make payments, I was unable to use my Amazon gift card to make the transaction, which is why I bought them here. In any case, these hoses were priceless.
4.2/5
For use with Intex filter pumps and saltwater systems
Compatible with various soft-sided pools
Replaces old 32mm Intex filter and equipment hoses
Dimensions: 1.25 x 59 inches
Compatible with various pieces of equipment
$234
I didn't notice the damaged hose until after the pool was set up and filled when my Intex 15' x 48" pool was delivered. In the middle of July, I didn't want to wait two weeks for an Intex replacement hose that was still under warranty, so I purchased this. Excellent connection and operation. Although I'm pretty sure you can get them for less money from other places, I chose to overnight it, which saved me a few dollars.
4.2/5
Automatic cleaner hose with mould cuffs - Dia.1-1/2 X 1m
Comes with 8 hoses at 3 feet long each
Fit for all major Automatic Swimming Pool Cleaners
Disassembling when not in use saves space. Extremely durable and flexible for increased longevity
Male/female connections at either end for versatile configuration
$234
Since more than 30 years ago, I have bought replacement hoses.First and foremost because of their pricing, these particular hoses make excellent replacements. These kind of pool hoses must be replaced because they do not last forever. This particular manufacturer has discovered a very good source for manufacturing products that are well-made, universally compatible with other brands, robust, have significant suction power, and perform admirably in all applications. Given that they are fresh new, I estimate that they will last 3-5 seasons with careful washing and storage. When winterizing, a light silicone spray will make them last longer. We are delighted and will buy these from this fantastic seller once more! I'm grateful.
3.9/5
Swivel cuff for kink-free maneuverability; UV and chemical resistant; extruded flexible EVA and poly-welded EVA cuffs
Not made to work on automatic suction type cleaners, (or robotic) pool cleaners; for use with standard swimming pool vacuum head and telescopic pole for manual vacuuming
Swivel cuff end connects directly onto the vacuum head and the non-swivel end connects to the skimmer
For proper suction and maximum performance, it is essential to prime the hose by filling entirely with water before use
High quality and made to last in the USA; measures 1-1/2-inch diameter by 30-feet for most in ground pools
Spiral wound construction for strength, flexibility, and maximum flow rate; superior tensile strength for crush-resistant operation
$234
This has been in my possession for a while. Every one to two weeks, I utilise it. I've had no issues thus far. A wonderful hose, really. I apply it to theOne Swimming Pool Vacuum Cleaner Hose Hanger/Carrier Holder for Vacuum Electric Pools Garden - Easily Store
2.8/5
Full One Year Warranty
2" (51mm) Diameter by 100' (30.4m) Long
Heavy duty blue PVC swimming pool backwash hose with hose clamp
Heavy duty 0.025" (0.6mm) wall thickness
For use while back-washing filters and draining pools
$234
I was seeking for a hose that I could use to drain water from a low area in my yard by connecting it to a pump. I was concerned after reading several reviews that claimed this hose was too narrow and too short to fit over the pipe it was intended to fit. I purchased a 2" hose since I needed to connect it to a 1 1/2" pvc pipe. It has performed flawlessly. I secured the hose to the pipe with a clamp. I've drove over the hose numerous times without experiencing any problems, and it empties at the end of my driveway. Although I wouldn't describe it as heavy duty, I kind of expected it to be extremely thin, thus I was surprised that it was thicker than I had anticipated. I'd repurchase this item and suggest it to others.
2.3/5
Heavy duty blue PVC swimming pool backwash hose with hose clamp
1-1/2" (38mm) Diameter by 50' (15.2m) Long
Heavy duty 0.025" (0.6mm) wall thickness
For use while back-washing filters and draining pools
Full One Year Warranty
$234
Your text will be rewritten by QuillBot. Start by typing or pasting something into this box, then hit the enter key.
Yes, pool pumps use a lot of electricity. They are one of the largest consumers of electricity in the home.
There is no definitive answer to how long pool hoses should be, as it depends on the specific needs of the pool and the surrounding area. However, as a general rule of thumb, hoses should be long enough to reach all parts of the pool, including the skimmer and the drain, without having to be stretched or pulled. This will ensure that the hose can be used to its full potential and will help to prevent any damage that may occur from stretching or pulling.
The sand in a pool filter should be changed every three to five years.
A pool filter should be cleaned at least once a month to ensure that it is functioning properly.
Pool hoses should be replaced every three to five years.
A backwash hose is not necessary for everyone. If you have a large pool or spa, or if you have a lot of debris in your pool, then a backwash hose may be necessary. A backwash hose can also be helpful if you have a lot of leaves in your pool.
COPYRIGHT © 2019