Best PlayStation 3 Batteries in 2022

Last update: December 14, 2022

Can a PS4 charge a PS3 controller?

No, a PS4 cannot charge a PS3 controller. The PS3 controller uses a different type of battery than the PS4 controller, so the two are not compatible.

Can I charge a PS3 controller with a wall charger?

Yes, you can charge a PS3 controller with a wall charger. You will need to purchase a wall charger that is compatible with the PS3 controller.

Can I use a PS4 controller on a PS3?

You can use a PS4 controller on a PS3, but only if the PS3 has a specific firmware update that allows it. The PS3 will need to have a Bluetooth dongle in order to connect to the PS4 controller.

Do PlayStation 3 controllers have batteries?

Yes, PlayStation 3 controllers have batteries. The controller uses a battery to communicate with the PlayStation 3 console. The battery life of a PlayStation 3 controller is about four to eight hours.


MPF Products 1600mAh Extended LIS1441, LIP1450 Battery Replacement Compatible with Sony PS3 Playstation 3 Move Motion Controller CECH-ZCM1E, CECH-ZCM1U Review:


These batteries were purchased to replace the ones in our Playstation Move controllers. They came with a convenient small tool set to install them and were sent out straight away. They were quite simple to swap out, and now they're fully functional once more after being charged for the entire night. So far, a wise investment rather than having to replace the controller entirely.



Nyko Charge Link - Mini USB Charge and Sync Cable for PlayStation 3 Review:


10 feet is a LONG distance! The cable that came with my PS3 is at least twice as long as this one, if not three times as long. Despite not measuring, I made three guesses. I usually leave this wire plugged in while I'm playing. The controller requires no recharging at all.edit 1/24: With a Prime subscription, the cost of shipping for this cord is less than $10. The individual who said that you could find it for less elsewhere must not have paid the $80 a year to have all shipping upgraded to free 2-day shipping without a minimum purchase requirement. To save a few dollars, I'd rather have the right chord than run the risk of having to send it back. I have had no problems with this cord in the past year or so. It is a highly reliable product, this cord/charge link.



Tomee PS3 Wireless Controller Rechargeable Battery - PlayStation 3 Review:


I must begin by mentioning that everything arrived much sooner than anticipated, which was fantastic! allowed me to resume gaming sooner. But when I got it, I saw there was no screwdriver. So...I assumed there would be one based on the image, but apparently that wasn't the case.Oh well, no big deal. It took me a very long time to find the correct size screw driver, even though my dad had a billion screw drivers in his toolbox.Other than that, changing the battery was simple and well worthwhile! The controller actually functions once more! As opposed to earlier, when it would occasionally not even accept a charge, which was really sad.For those who are as blonde as I am, I must point out that the original battery is stored in a plastic frame within controllers that have never had their battery pack changed. Take it outside.When the frame is inside the controller, this battery won't fit. It fits wonderfully without the frame. Recognize that the small plastic frame can be removed effortlessly and immediately. At all. So...yah. The plastic frame is too little, not the batteries, which is oversized.Anyway!!!I most certainly will purchase again in the future. Even though the loss of a screwdriver was a minor annoyance, the fact that it still functions makes it a solid product and worthwhile to purchase—ESPECIALLY if you don't want to shell out $39.99 for a brand-new PS3 controller!such as holy crow! With $10, you get far more use out of the controller.



MPF Products 570mAh LIP1359 Battery Replacement Compatible with Sony Playstation 3 PS3 Dualshock 3 Wireless Controller CECHZC2E, CECHZC2U with Installation Tools Review:


I've had a PS3 since the beginning, so it makes sense that my ancient Dualshock 3 controllers have completely lost all of their power (LiIon cells have a hard limit of 5 years of useful service). I saw swelling cells that were a definite fire hazard as I tore them apart. When looking for replacement cells, I found hardly any possibilities that were a direct fit. Actually, the majority of replacement batteries were made to accommodate the Dualshock 4 controllers that come with the PS4 system. Despite the fact that they were cheap, I didn't want to modify the DS3 controller bodies to make them fit. After doing some more research, I discovered these LIP-1359 cells that were expressly advertised as fitting the DS3 controller body. I purchased two of them and crossed my fingers because they did not match the two batteries I removed off my launch DS3s (really tiny black squares).I chose to disassemble a third DS3 controller I had, which was in better condition than the two original controllers, after receiving these replacements. The third controller, much to my surprise, featured one of these LIP-1359 cells with Sony branding. I discovered that the tiny black cells had a plastic structure when I matched up all three controllers that helped them fit out the mounting bracket in the controller. The LIP-1359 cells fit the framework without any problems and didn't need a similar adaptor.You want cells like these. The LIP-1359 cell from MPF Products not only fits the DS3 controller perfectly, but it also quickly charged and lasted more than ten hours of nonstop gameplay. When it was time to recharge, they increased the new charge until the controllers' system indicated 100%. The controller and PS3 claimed two bars of charge after another 10 hours of gaming. For the past three days, everything has been running flawlessly. Although the battery costs more than similar products (all other DS3 cell offerings I have seen are for LIP-1389 cells, which DO NOT fit the DS3 body properly), they are incredibly reliable and bring these vintage controllers back to life.I had some reservations, however the direct fit and charge quality of these batteries dispelled any reservations. To replenish the batteries in my other two DS3 controllers, I'll be purchasing two more of these "kits." Two enormous thumbs up



MPF Products 600mAh LIS1442, 4-180-962-01 Battery Replacement Compatible with Sony PS3 Playstation 3 Move Navigation Controller, CECH-ZCS1E, CECH-ZCS1U Review:


I should have known this prior to installing...Please remember: THIS IS NOT A MOVING BATTERY! It is for the "Move Navigation Controller," a less substantial Move accessory that is rarely used. It is slightly smaller and has a lower capacity than the Move battery (600 mAh vs. 1380 mAh).Given that, you can still use this battery in your Move if you don't mind its lower capacity and how well it fits and functions with the device (which is what I did)



2 Playstation Move Controller Battery Replacement for PS3 and PS4 Review:


Seller claims that it functions with both PS3 and PS4 motion controllers. That is both true and false. There may be some modification work needed if you have some of the most recent move controllers. But only a bit. I'll resume my narrative now.Back at Christmas 2018, I bought a new VR package that included PlayStation 4 motion controllers. Five months later, I have one with a dead battery, so I pulled it apart and started looking for a replacement online. There were NONE that resembled it everywhere. absolutely nothing The model is LIS1651. It's longer than any I could locate that was readily available. However, the specifications are the same as those given below. Actually a little lower, so I decided to just buy this one with the knowledge that I would have to modify it. Voltages were compatible, so I proceeded. In fact, I had to change it.Alterations, These are thinner all around but shorter than the more recent LIS1651, so it would be simple to put them into the controller. The problem was the connection. It is not equivalent. To connect the connector from my old battery to this new one, I had to first cut the wires from my LSI1651 dead battery, then cut the lines from this one. Simply connect a red and black wire, that's all. Not a difficult concept.Just wanted to make sure folks were aware of the need to inventory their possessions and be ready. Although I couldn't locate an LSI1651, this LIS1441 will function if you follow the instructions above. This is essentially the only option available until a real LSI1651 replacement is made.Once more operating properly, the controller. Yay! I gave it a rating of 4, knowing that my circumstance needed more help even before I purchased it. With the exception of the fact that they aren't immediately compatible with all models, the seller's batteries delivered exactly what they said they would. I anticipate that the more recent LS1651 batteries are still only starting to appear. Since I've done my best to notify both customers and the seller, I hope the vendor adjusts the description of his sale.


Does PS3 work without CMOS battery?

A CMOS battery is used to power the BIOS chip in a computer. This chip stores information about the computer's hardware, such as the time and date. Without a CMOS battery, the BIOS chip will not work and the computer will not start up.

How do you charge a dead PS3 controller?

To charge a dead PS3 controller, you will need to connect it to the PS3 console using a USB cable. Once it is connected, the PS3 will automatically begin charging the controller.

How do you fix a PS3 controller that wont connect?

If your PS3 controller won't connect, there are a few things you can try. First, make sure that the controller is charged. If it's not, plug it in and let it charge for a few minutes. If that doesn't work, try resetting the controller. To do this, hold down the PS button and the Share button at the same time for about 3 seconds. If that doesn't work, try connecting the controller to a different USB port. If all else fails, you may need to buy a new controller.

How do you revive a dead PS3 controller?

If your PS3 controller has stopped working, there are a few things you can try to get it working again. First, try resetting the controller by pressing the small reset button on the back near the L2 shoulder button. If that doesn't work, try connecting the controller to the PS3 using a USB cable and then pressing the PS button. If that doesn't work, you may need to replace the batteries in the controller. If the controller still isn't working, it may be time to buy a new one.

How long do PS3 batteries last?

PS3 controllers use AA batteries. Depending on the brand of batteries and how long they are used for, they will last anywhere from 2 weeks to a month.

How long does it take for a dead PS3 controller to charge?

It can take up to two hours to charge a dead PS3 controller. The controller must be completely charged before it can be used again.