4.3/5
Professional design, portable for convenient usage
Compatible with PS3 Slim console. Made by Third Party, NOT official item.
Easy to use, quickly power on or off. High quality power switch, easily turning on or off and guide console
Made of fireproof, high pressure resistant material and it is very safe and reliable
To avoid plugging in and out repeatedly
$234
I'm not sure if it's a hardware or software problem, but it looks that the PS3 and PS4 systems start to operate poorly if steady power is supplied to them for an extended period of time. My PS3's system experienced an orange light failure and an overheating prompt (even though I just turned the system on). My PS4's issue was that the disc drawer wouldn't properly load discs. Having these switches to just flip on and off makes it quite convenient because both problems were resolved when I completely removed my systems, restarted them, and then plugged them back in a short while later. Since I started using this switch for my systems, I have NEVER experienced a console failure. I simply turn off all of the power going to the units after a game (just make sure the systems are completely off before cutting off the power). It's unfortunate that these switches aren't widely available at stores that sell video game consoles.
4/5
Full compliance with all relevant regulations and standards
Vibration support (For PS3/PS4). Perfect button mapping.
IMPORTANT: Please check the compatibility of the product at the brook official web site before you place the order because NOT all the brand or models of the controllers / wheel / Joystick are supported. DOES NOT support headset/headphone.
USB interface which permits hot swapping
Each Brook Controller Adapter can only handle one PS2 controller at a time. Please update to latest firmware before use. Comes with Gam3Gear Keychain.
$234
This was purchased to go with the Street Fighter 15th Anniversary Fighting Stick that I already purchased for my PlayStation 2. I choose to use my PS3 after discovering it in the garage. I had to force the system to shut down when I first connected it. The PS3 kept repeating the same action when I turned it back on. After several tries, I was able to get the button in the middle of the device to operate.The good news is that it performs admirably once the system eventually recognizes the stick. It responded quickly, and all the buttons mapped exactly as promised. It's just annoying that I have to keep fiddling with it in order for the PS3 to recognize it. I tried it on my PS4 and encountered the same problems, but after a few attempts, I managed to get this outdated piece of hardware to function on a PS4!Overall, I believe this is a good value given the cost. My hardware was somewhat outdated, so when Marvel vs. Capcom Infinite and Injustice 2 release, I'll definitely wind up purchasing a new controller. I can use the older stick to play Street Fighter V and other games for the time being. Thanks!
3.9/5
Supports NEOGEO mini
Wirelessly connect your PS4, PS3, Wii U Pro, Nintendo Switch Pro and Xbox One S Bluetooth controllers to your PS4, PS3 or PC system.
The wired PS4,PS3,Xbox One, Xbox 360 controllers and fight sticks can be connected to your PS4, PS3 and PC system.
Please download the newest firmware V1.23 to get it work on PS4 firmware 5.5.
The standard wired USB controllers like Logitech rumble gamepad F510 and F310 can be connected to your PS4, PS3 and PC system.
$234
Version 1.04 of the MAGIC-S Adapter Rev. 1.1 firmware was released on May 24, 2019.When checked on July 6, 2019, the firmware for the PlayStation 4 system was up to date.My Switch comes with Nintendo Pro-Con. Due to the fact that I don't own a PS4, I'm not accustomed to using the controller. On a friend's PS4, I examined the adaptor.Switch Pro-con With Magic- S to PS4 tested, and it performs flawlessly!Both the wired USB mode and the wireless Bluetooth mode on the switch Pro-Con worked. Rumble is still present while using the PS4 adaptor.didn't kick me out even after playing for about an hour (as some people may have complained in previous firmware with PS4 or the adapter that it did after 10 minutes).If it doesn't seem to be working, keeping the firmware updated on the Magic S adaptor should help.Although pairing Joy-cons can be challenging, it should work with them as well. If one doesn't timing hitting the sync button exactly, the adapter may occasionally only identify one joy con. I haven't gotten a chance to really settle down and connect my joysticks and adapter to a PS4 yet. I still think it would function properly if one knew how to sync the joysticks.Edit: 8/17/19On the PS4, joysticks also function with this adaptor, albeit it can be challenging.Pairing the right side, then the left, then both is the key to synchronizing joysticks.1. Unpair your joycons from your switch so that they are no longer associated with the switch.2. Connect your PS4 to a TV and an outlet.3. Connect the PS4's USB adaptor.4. Switch the adaptor on so that a slow blue blinking light appears.5. When it is still slowly blinking, hit the right Joy-sync Con's button.6. Next, push the adapter's button to enable quick blinking.7. Watch for the matching solid color to appear (test by pressing a button)8. Press the adapter once more to make it flicker slowly. (It will momentarily stop working)9. Press Sync on the left joystick.10. Press the adapter's sync button to make it flash before waiting for it to turn solid (now the left joy con should be paired, but not both at the same time yet).11. Press the adapter again to get slow blinking so that both can be paired.12. Press the left and right Joy-sync Con's buttons simultaneously.Press the adapter's sync button to enable quick blinking.14. Move the right Joy-Con closer to the adapter to have it sync first, then press the R and L buttons to link it with the left Joy-Con.15. (If not functioning repeat step 11-14 until get appropriate connection) (If not working repeat step 11-14 until get right connection).Edit: This adapter also works with Real Arcade Pro V Hayabusa for Nintendo Switch!
3.9/5
ãâ¬ÂWide Compatibilityãâ¬âThis Xbox One keyboard adapter is compatible with most mainstream keyboard and mouse on the market. And especially perfect for FPS, TPS, RPG and RTS games like Forttnite, PUBG, APEX Legends, Rage 2, DOOM, COD, Rainbow Six Siege, CS etc...
ãâ¬ÂNoteãâ¬âWhen connect this keyboard converter to the PlayStation 4 console, you need to open the ââ¬ÅWired Connection Modeââ¬Â in the Host Setting firstly. And this adapter does not currently support the use of headset on the Xbox One or PS4.
ãâ¬ÂCompatible With PS4/Xbox One/Switch/PS3ãâ¬âDUTISON Keyboard and Mouse Converter allows you to play console games with keyboard and mouse instead of game controller, which provides players with better game control methods and increase the fun of the game.
ãâ¬ÂEasy To Set Upãâ¬âThis PS4 keyboard adapter is easy to use, no additional driver/software required, plug and play. But Please Note, it is necessary to boot with the original wired controller when connect to consoles. Other third-party accessories may cause the connection to fail.
ãâ¬ÂYou Are Protectedãâ¬âIn the rare circumstance that you are not completely satisfied with your purchase, we will refund or replace your order through our 100% Money Back Guarantee.
$234
After a day of investigation, the box eventually arrived, and I thought it was fantastic! I finally decided to buy two after battling with the issue of urgent use. I want to use it on the gaming console with my brother. We were able to insert and play within minutes without making any complex key mapping changes. It is strongly advised that this product be used precisely as instructed in the handbook. My brother and I both receive excellent praise. There is no needless unhappiness! adore it
3.3/5
Fully programmable and customizable gaming device compatible with PlayStation 4, Xbox One, Nintendo Switch, PlayStation 3, Xbox 360, Wii U, PlayStation TV, PS4 Remote Play, Xbox One App, Android Systems, Computers and more. Programing Software available for Windows, Mac and iOS.
Customize the controller layout accordingly your needs for any game. Exclusive MODs, combos and macros can be easily enabled with a simple drag-and-drop of Gamepacks or community made scripts. No chips to install, no tools required. Create your own scripts, combos and macros at the millisecond precision. Program automated commands in reaction to events. The possibilities are endless.
Use your preferred controller on any compatible gaming system. The Titan Two is an all-in-one gaming device that replaces dozens of gaming adapters, converters and crossover devices found on the market. The Titan Bluetooth Module (sold separately) allow Bluetooth enabled controllers to be used wirelessly with the Titan Two, USB wireless adapters are also supported.
Package Contents: Titan Two Device, High Quality Micro-USB Cable 40cm (1.3 FT), Quick Setup Guide.
Play with Keyboard and Mouse on consoles with an unprecedented level of configuration. The Titan Two is fully compliant with the HID standard, making it compatible with virtually any HID gaming devices, such as fight-sticks, steering wheels, joysticks, foot switches, etc.
$234
It arrived today with with the optional Bluetooth extension, and it was well made and simple to use as long as you followed the instructions.The following standouts:1. I was completely unaware of latency. Quickly and exactly respond.2. Perfectly support my Nacon Revolution Unlimited Pro V3 in terms of rumble, wireless control, headphone compatibility, touchpad, and other features. CM didn't offer me that, though.3. I DON'T need to connect two controllers to Titan in order to stabilize the authentication process (we had to connect our preferred controller to port 1 and the stock controller to port 4 in order to successfully complete continuous authentication, remember?) I haven't seen anyone else use Nacon's Authentication natively, which I found to be the case. So all I have to do is plug in the Nacon USB dongle. This one adds significantly.Following a one-week test drive, a follow-up comment will be provided. And happy gaming!
3.3/5
âÅâCompatible with Windows 98 / ME / 2000 / XP.
âÅâConvert your PS2 Dual Shock Controller into a PS3 Dual Shock.
âÅâUSB Controller Adapter Converter Length: 8.26".
âÅâEasy to set up and use Supports most of PC games, can be directly used with PC computer.
âÅâConvert PS2 Controller to PC.
$234
I purchased this to link my PC to a Guitar Hero 1 SG controller. The whammy bar didn't work, but it generally works wonderfully. I am unable to comment on whether the tilt sensor in my guitar is functional because it is broken. I ultimately purchased a different adaptor somewhere (one recommended by the devs for clone hero for this exact reason). I am unable to vouch for how well it functions with common controllers.
3/5
Keyboard, Mouse and Steering Wheels are supported via MaxAim DI plugin (Windows PC required).
Package Contents: Titan One Device, Mini-USB Cable 1.0m (3.2 FT). (*) Crossover play on PS4 console has restrictions. (*) Controller headsets are not supported. (*) For full support of crossover play and controller headsets consider our newer product, the Titan Two.
Fully programmable and customizable gaming device compatible with PlayStation 4, Xbox One, Nintendo Switch, PlayStation 3, Xbox 360, PlayStation TV, PS4 Remote Play, Xbox One App and more.
Easy enable MODs and button remapping to your original controller. Dozens of ready to use Gamepacks and over a thousand downloadable scripts available online. The programming software for the Titan One device is available for Windows systems only.
Use your favorite controller on any compatible console with full support for controller vibration, triggers force feedback, motion sensors, touchpad, LEDs, lightbar. Work with all official gamepads including Wiimote, Wii U Pro, Xbox One Elite and more.
$234
The functionality of this tool was perfect for my needs. I was able to quickly learn the GPC language, utilize it with both the PS4 and Xbox One, and create my own scripts to auto-farm my favorite games. The ChronusMax USB stick's equivalent, the Titan One, was a better gadget. The ChronusMax had a tendency to lose connection with the console after a while, whereas the Titan One was reliable.
COPYRIGHT © 2019