Best Playground Equipment Parts & Hardware in 2022

Last update: December 27, 2022

How much does it cost to build your own playground?

It can cost quite a bit to build your own playground. The cost will depend on the size and complexity of the playground, as well as the materials you use. If you want to build a really nice playground, you could easily spend a few thousand dollars. However, it is also possible to build a playground for a lot less. It really just depends on what you want and how much you're willing to spend.

Is it cheaper to build your own playground?

There is no definitive answer to this question as it depends on a number of factors, such as the cost of materials, the size and complexity of the playground, and the amount of labor required. However, in general, it is usually cheaper to build your own playground than to purchase one ready-made.

What are the 12 features of play?

Some features of play are that it is fun, challenging, stimulating, exciting, and promotes social skills and physical development. Play also helps children learn about their environment and themselves. It is a time for practice and experimentation.

What are the 12 types of play?

There are 12 types of play: 1. Gross Motor Play: This type of play is characterized by physical activity and movement. It helps children develop their large muscle groups and coordination. 2. Fine Motor Play: This type of play helps children develop their small muscle groups and coordination. It is characterized by activities that require the use of the hands, such as puzzles, blocks, and drawing. 3. Language Play: This type of play helps children develop their language skills. It is characterized by activities that involve communication, such as singing, reading, and storytelling.


Jungle Gym Kingdom Heavy Duty Swing Hangers Playground Porch Yoga Seat Trapeze Wooden Sets Indoor Outdoor | 2400 lb Capacity | Locking Snap Hooks | Ebook Install Guide Review:


Hardware and instructions are not included. I used 4"-long, 1/2"-galvanized lag screws with a 5/16-inch pilot hole. Those infants are not leaving. You could use lag bolts instead of drilling a hole in the beam, but if you're using a 4"x6" bolt, you need a 7" bolt to have enough room to travel through the hanger, beam, washer, lock washer, and still have room for the nut. You can get the necessary hardware for roughly $10 each set. Additionally, you will require a drill bit long enough to pass through the beam because making a mistake here is really painful. (I'll continue using screws.)When using a socket wrench to tighten down your screws or bolts on the hangers, the horizontal bolt gets in the way a little bit. Once I was almost done, I had to go to turning them in 1/4 turns at a time with a crescent wrench. I had similar issue with 2 out of 6 people. They are quite strong, quiet, and swing effortlessly, as other reviewers had noted. They should, in my opinion, include advice on hardware placement and spacing.Disclaimer! I am a mom who constructs a lot of things, not a swing set professional. At your own risk, use these with the hardware you believe is most suited.



AusKit Swing Swivel, 30 KN Pulley, Safest Rotational Device Hanging Accessory with Carabiners for Web Tree Swing, Swing Setting, Aerial Dance, Children's Swing Review:


Other swivel hooks I've owned would not swivel freely due to the weight of whatever was attached, which created too much friction. Not so with the ball bearing mechanism of the Swing Swivel, AusKit's 30KN Safest Rotational Device Hanging Accessory. It is where I hung my homemade "pinwheel tree," which rotates on its axis as the wind blows pinwheels around in it. absolutely incredible see video



Royal Oak Easy Hang (4 FT) Tree Swing Strap x 2 - Heavy Duty Carabiner and Bonus Spinner Review:


Quick and well-packaged delivery. came with every piece listed, and each piece looks well-made. Installs quickly, requires no tying, and is extremely secure with no danger of slippage. I purchased this to replace earlier straps that snapped after only a year of use due to wear and tear (by toddlers). Since I only installed it a little over a week ago, I cannot yet predict how long it will stay. The straps are a bit too long for where I have them, but not long enough for me to wrap twice, so I awarded it four instead of five stars. They should have been 3 feet or perhaps 3-1/2 feet tall; having possibilities would have been good. It was convenient to receive the rotational device as straps in the package rather than having to purchase it separately.



EASY HANG (4FT) TREE SWING STRAP X1 - Holds 2200lbs. - Heavy Duty Carabiner - Bonus Spinner - Perfect for Tire and Saucer Swings - 100% Waterproof - Easy Picture Instructions - Carry Bag Included! Review:


I believe I got a brand-new, enhanced model. My strap was quite similar to the one in the original image, down to the massive cantilever and swivel. The cantilever hook's pre-sewn location is pretty obvious, and the strap I received lacked the peculiar loop that several people had concerns about. I hung this 12 feet in the air on a limb that hangs over a steep hill, yet I'm just 5'5". I used a step ladder, but the inclination meant that I could only climb a few rungs. Despite my initial fear that I might complete this duty by myself, the reality was entirely different. I just threw the heavy end up and over the branch with the cantilever and swivel already attached, letting the heavy metal pieces fall through the open strap and gravity take care of the rest. Even though it required 3 tries, the installation was completed in about 5 minutes. It was extremely simple. Even though the swing we are adding to it won't arrive until tomorrow, I'm already pleased with it.



Besthouse Permanent Antirust Stainless Steel 304 Heavy Duty Swing Hangers 1000LB Capacity, Silent Swing Hook 360° Rotation, 4 Screws for Concrete and Wooden, Yoga Hammock Chair Sandbag, Swing Sets Review:


Excellent hooks for hanging chairs in hammocks (indoors or outdoors).Make sure to accurately locate the ceiling joists by identifying them (if they are covered by drywall material). You can accomplish this by ascending to the attic and inserting a thin metal wire through the drywall into the room below (next to your preferred mounting location).In order to prevent the huge installation screws from fracturing (or otherwise harming) your wooden ceiling joists, I also strongly advise that you pre-drill all mounting holes in them (from the room below).



Eastern Jungle Gym Easy 1-2-3 A-Frame Swing Set Bracket Heavy Duty for EZ, Simple Install - DIY Swing Set Parts Review:


You should be aware of a few things before I begin my evaluation. First things first, I did NOT obtain this product for free or at a reduced price. Second, I have never constructed anything akin to a swing set before and I'm a 34-year-old woman. Before this, I had never even used a ratchet. I am a biochemist who studies eye diseases and the mother of an autistic 4-year-old kid. Like many children with autism, my son enjoys swinging. And it would be an understatement to say that I "loves" her. I wanted to gift him a swing set for his upcoming birthday. We recently relocated to a new home. Our current home lacks the wonderful swinging trees that our previous home had. The cost of purchasing a decent swing set, however, is SO HIGH that I began researching the feasibility of making one. Despite the fact that I lack much experience in this area, I'm all for trying! I came across these brackets at that point and decided I could accomplish it.I'm delighted I spotted the "kit" version rather than just purchasing two brackets. It also helped me avoid wasting a ton of time and effort on the wrong hardware purchases. With the exception of wood and tools, this kit includes everything you need to create an A frame. The basic A frame I created has 10' top beam and 10' legs (they suggest 8' legs, but I wanted a wider swing arc). I required the following to finish the project:This toolkit (which comes with two brackets and 28 appropriately sized lag bolts and washers)- One 10 foot 4x6 beam (available at Home Depot) for the top (pressure-treated lumber is recommended to ensure longevity and prevent degradation when in touch with the ground).- Four 10 foot 4x4 beams (Home Depot) for the legs. These can be anywhere between 8 and 12 feet long, but I strongly advise going longer if you intend to bury or anchor the legs in the ground. Instead of burying them, I chose to just purchase some screw-in ground anchors.- A drill and drill bit to pre-drill the holes for the lag bolts (already had). I'm not sure precisely what size I used, but it was one that was included with my drill right out of the box.two swings My son adores the Deluxe Platform Swing by HearthSong that I already owned and had purchased from Amazon the previous year. I used the yellow swing ties, which I also purchased from Amazon, to hang it in our tree. Since I already had them, I made the decision to use them. For this build, I purchased the half bucket swing from Swing Set Stuff on Amazon.- Safe-Kidz heavy duty swing anchor kit, which included four lag bolts and screws in addition to two anchors, two clips, a drill bit, and four anchors.- Two 80 "chain lengths made of zinc (Home Depot). Before constructing the swing set, I estimated this number, but I actually only needed about 70 "about the half bucket. Everything depends on the kind of swing you're using and the kids' ages.- Ratchet and the right size bit - Two Quick Links (Home Depot) to join the chain ends to the swing (again, one that came standard with my ratchet that I already had)With all of this gear, it only took me a few hours to finish this swing ALL BY MYSELF, and that includes shopping and loading/unloading! The brackets do all the guesswork and meticulous measuring on your behalf. Your A frame is finished after you simply put the wood into the bracket, drill the lag bolt holes, and tighten them. Observations on installing the beams into the brackets Other reviews complained about awkward fits and the need to sand or lubricate the beams before pounding them in with a rubber mallet. I had my dish soap, rubber mallet, and orbital sander ready to handle whatever came up, but none of it was required! The beams I purchased glided in with little effort at all. Actually, it couldn't have been any simpler. Depends on where you purchase your wood, I suppose, but if it's REALLY 4x4 and 4x6, they should go in to these brackets NO PROBLEM without sanding or lubricating.The mounting hardware for the half bucket swing in the top beam was measured and installed before I stood it up (I actually did need help with that portion). Hardware creators advise taking at least 15 measurements "removed from the swing set's nearest support structure. I went a little bit further. Additionally, they advise spreading the hardware wider than the swing they will be supporting. For common swings, 16 "must be alright. I took that action. Once it was upright, I used my ladder to hang, adjust, and test the platform swing to make sure it was stable. Wow, there's no way this is going anywhere! I was able to swing rather high while lying on the platform without the ground being connected to me (which I would do anyhow) with the A frame not even flinching under my 130 lb weight!My son was ecstatic when my husband and son returned from their father's day that afternoon. They were both amazed that I had done everything myself. He adores his brand-new swing set, and I appreciate how simple it was and how much money it saved me. So, if it's any use, here is the final cost of the one I constructed:Wood - $100Hardware/bracket kit: $79$40 for a half bucket swing $30 for a chainHardware for installing a swing: $28Platform swing and swing ties were already mine, although they cost $130 and $25, respectively.That was essentially wonderful because it only cost me $277 out of pocket and a few hours on a Saturday morning. The total cost, including the items I already had, came to $432.You would have a difficult time finding something less expensive for a swing set with this height and durability. This would also be incredibly simple to expand upon! The A frame will get wood boards added to the sides, and I'll build a climbing wall on one side and a slide on the other! And I'm so pleased with myself for accomplishing this. I enjoy challenging gender norms! I'm telling you, anyone could accomplish this if I could!I sincerely hope this is useful to someone else. Good luck and enjoy your construction!



SUMMERSDREAM Rigid Blue Child Swing Review:


I'm hesitant to write a review because I just got this yesterday, but my son likes it so much that I feel compelled to inform other parents. This is what I bought to hang on the doorframe of my tiny NYC apartment. Within 2 minutes of taking it out of the package, my son began using it (I already had hooks installed). I like that the rope is adjustable because my doorframe is extremely high, and the seat is stable. It appears to be quite nicely crafted and isn't at all hefty. The seat's apparent slope is the one minor drawback for me. The seat can move and slide around a lot due of how the rope is wrapped through, I suppose.This is something I would unquestionably advise, especially for indoor use. It can be installed anywhere and provides youngsters with hours of pleasure on wet days, or really any day.



Eastern Jungle Gym Heavy Duty Tire Swivel for Tire Swing Attachment - PRE-Greased - Ready to Use Review:


On our front porch, there was a basket chair suspended from the ceiling. I had fastened the chair to a ceiling rafter using a sizable eye bolt. It quickly became a favorite spot for reading books, checking email, and other activities, but after a short while, the wind and careless swingers lead the chair to spin and the eye bolt to come loose from the ceiling. I eventually removed the chair and stored it in the attic after making numerous (failed) attempts to attach the eye bolt back into the ceiling.One evening, I discovered this on Amazon and decided to give it another shot. It worked! Now the chair rotates freely and doesn't move. I wish I had completed this long ago.



SELEWARE Set of 2 Permanent Antirust 304 Stainless Steel Screw Bracket Heavy Duty 180° Swing Hangers, 1800LB Capacity Playground Yoga Hammock Rope Tire Web Chair Sandbag Punching Bag Porch Swing Sets Review:


The incredibly sturdy, long-lasting steel used to make brackets and springs makes them exceptionally hefty and robust products. Since the brackets were made of plastic rather than the advertised plastic-coated steel, we already had to return a swing hanging kit. furthermore includes all the bolts and hardware! Do not make a second trip to the hardware store! We hardly ever submit reviews or photos. Very pleased with this purchase!



CREATIVE CEDAR DESIGNS Playset Anchor Pack (4Piece), Black, One Size Review:


I got my son's playground set these Playset Anchors. Excellent value in comparison to rivals who demanded about $20 for a set. I discovered that installing these anchors was not that difficult. I could only get them a few inches into the ground with my hand, so I had to use a wrench to push the anchors further. Unfortunately, there are only approximately 6 inches of fill material on my land until we reach a hard, rocky layer, thus I was only able to advance these anchors so far. I only have one small quibble: I wish there were more holes in the metal straps farther down the band to accommodate anchors that could only be moved so far. I had to attach the metal straps to the playground equipment sideways, which I'm confident will be successful.These function well overall, and I would buy them again.


What are the 5 main elements of a play?

The five main elements of a play are plot, character, dialogue, stagecraft, and theme. These elements are used by the playwright to create a dramatic work.

What are the 7 parts of play?

There are seven parts of play: locomotor skills, object control skills, stabilizing skills, manipulative skills, body management skills, fitness skills, and creative skills.

What are the materials used in swing?

The materials used in a swing can vary depending on the type of swing. A basic swing may be made of wood, while a more complex swing may include a metal frame with a padded seat. The most important factor in choosing materials for a swing is safety. The swing should be sturdy and able to support the weight of the user.

What are the parts of a playground?

A playground is a fun place for children to play. It has many different parts, such as swings, slides, and monkey bars. Each part of a playground has a different purpose. Swings are for swinging, slides are for sliding, and monkey bars are for climbing. All of these parts are fun for children to use.

What are the parts of a swing set?

What do you think are the 3 most important things to have on a playground?

There are many things that could be considered important to have on a playground, but three of the most important things are safety features, age-appropriate equipment, and a variety of activities. Safety is always the top priority when it comes to playgrounds. There should be a soft surface under the equipment to cushion any falls, and the equipment should be well-maintained to avoid any sharp edges or other hazards. Age-appropriate equipment is important because it helps ensure that children are able to safely use the playground. For example, younger children should have smaller slides and climbing