There are many types of pipe fittings, and it can be difficult to identify which one you need. The most important thing to know is the size of the pipe; fittings are typically either male or female, and must match the size of the pipe. Other factors to consider include the type of material the pipe is made of and the pressure rating. Once you have this information, you can narrow down your choices and select the best fitting for your needs.
There are many types of pipes, including: 1. PVC pipes 2. HDPE pipes 3. LDPE pipes 4. ABS pipes 5. Polypropylene pipes 6. Stainless steel pipes 7. Copper pipes 8. Galvanized steel pipes 9. Alloy steel pipes 10. Titanium pipes
Pipe fittings come in many different shapes and sizes. They are often called by their function, such as "tee" or "elbow."
Male and female pipe fittings are used to join pipes together. Male fittings have a small end that fits inside a female fitting. Female fittings have a large end that a male fitting fits into.
4.7/5
Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Adapter for connecting a hose to a male threaded connection of a different diameter
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
Hose barb on one end and male NPT threads on the other
$234
I've ordered and utilized a variety of Anderson fittings throughout the past year. One of them is this. I've always regarded Anderson fittings to be of the highest caliber. I've never had a fitting fail me. All of the threads have been perfectly cut, and they all meet the requirements for NPT design. They never leak when properly (but not too) tightened and encased in PTFE. The barbed shank is longer than most and grips the hose firmly. Once more, there will never be a leak when the clamp is properly applied. The exterior's hex shape makes it simple to utilize an open-end wrench. nicely polished and machined.Simply put, this fitting is flawless. I have nothing to complain about with this Anderson product, nor with any other Anderson product I have used (SO FAR!!!). Five (5) stars
4.6/5
Ideal for irrigation and underground residential sprinkler systems
Made in USA
It is designed for 1†pipe to fit inside of it.
Used to provide a branch supply line from a main line
Conveniently packaged in quantities of 10
PVC Schedule 40 pressure fittings
Used to provide a branch supply line from a main line
$234
Your text will be rewritten by QuillBot. Start by typing or pasting something into this box, then hit the enter key.
4.6/5
Excellent vibration resistance
Use with plastic tubing or rubber hose
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
One piece construction
Barbed edges provide positive connection
Intended for use with hose clamp or crimp type ferrule
$234
I've ordered and utilized a variety of Anderson fittings throughout the past year. One of them is this. I've always regarded Anderson fittings to be of the highest caliber. I've never had a fitting fail me. All of the threads have been perfectly cut, and they all meet the requirements for NPT design. They never leak when properly (but not too) tightened and encased in PTFE. The barbed shank is longer than most and grips the hose firmly. Once more, there will never be a leak when the clamp is properly applied. The exterior's hex shape makes it simple to utilize an open-end wrench. nicely polished and machined.Simply put, this fitting is flawless. I have nothing to complain about with this Anderson product, nor with any other Anderson product I have used (SO FAR!!!). Five (5) stars
4.6/5
INSTALLS IN SECONDS: 1/2-inch tee pipe connector requires no soldering, crimping, or glue--just push to create a watertight seal
COMPATABILITY: Same as part numbers U362LFZ and U362LF
CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times
QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination
$234
Over the past year that I have owned my camper, I have heard wonderful things about these tiny jewels. I say that because they must believe they are made of gold, but I have previously used slip lock connectors on air lines and other things on automobiles and trucks and enjoy how simple they are to push on, so when the time came for my first upgrade, which involved adding an expansion tank to my RV's water system to stop pump short cycling, water hammering, and flow surging, I was prepared. I intended to use Shark bite fittings for PEX tubing, and the tank contains a Shark bite 1/2 to 1/2 MNPT mip Elbow with the part number U280LF. The tee 1/2 x 1/2 x 1/2 pn# U362LFA is also included. Using the Shark Bite Slip Tee Pn#U348LFA, the system will also incorporate a water pressure gauge. Gotta adore shark bite because they expedite work so well.
4.6/5
COMPATABILITY: Same as part numbers U370LFZ and U370LF
CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times
VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination
QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
INSTALLS IN SECONDS: 3/4-inch tee pipe connector requires no soldering, crimping, or glue--just push to create a watertight seal
$234
Over the past year that I have owned my camper, I have heard wonderful things about these tiny jewels. I say that because they must believe they are made of gold, but I have previously used slip lock connectors on air lines and other things on automobiles and trucks and enjoy how simple they are to push on, so when the time came for my first upgrade, which involved adding an expansion tank to my RV's water system to stop pump short cycling, water hammering, and flow surging, I was prepared. I intended to use Shark bite fittings for PEX tubing, and the tank contains a Shark bite 1/2 to 1/2 MNPT mip Elbow with the part number U280LF. The tee 1/2 x 1/2 x 1/2 pn# U362LFA is also included. Using the Shark Bite Slip Tee Pn#U348LFA, the system will also incorporate a water pressure gauge. Gotta adore shark bite because they expedite work so well.
4.4/5
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
Female National Pipe Taper (NPT) threads for connecting to male threaded pipes
Coupling for connecting two pipes with the same diameter in a straight run
$234
There isn't much to say about something like this other than the fact that it is well-made and free of burrs and flaws. I used it for an air tool connection, and although though the threads on either side are not very deep, I was still able to achieve the same result without the use of a rubber o-ring or washer by simply using Teflon tape sealant. would repurchase if necessary. But this will endure forever.
4.2/5
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
Reducing hex nipple for connecting two threaded pipes with different diameters
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Male National Pipe Taper (NPT) threads for connecting to female threaded pipes
Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
Meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance
$234
To connect a 3/8-inch shutoff valve to a 1/2-inch fitting on an air tank, I needed an adapter. Some users claimed they received the wrong size or didn't get what they purchased. I had no such issue; I received everything I had requested. The threads are flawless, and it is well-made. A great value, too. The small paper tag that is on it was difficult to take off neatly, which is my only criticism and the reason I gave it 4 instead of 5 stars. On the fitting, paper and glue were left behind. However, because it's in the center, nothing is affected; it just looks awkward.
4.1/5
Hex bushing for connecting two pipes with different diameters
Operating temperature range of -53 to +121 degrees
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Male NPT threads on one end and female NPT threads on the other for connecting pipes with different ends
Meets ASTM B584 standards for quality assurance and ASME/ASMI B16 technical specifications
$234
lovely adapterIf you intend to ingest the water that comes through this, don't use it because it carries a cancer warning for potable water.
Pipeline fittings are components used for connecting, terminating, controlling, and directing the flow of a pipeline. There are many different types of pipeline fittings, each with their own function. Common types of pipeline fittings include elbows, tees, wyes, crosses, couplings, valves, and caps. Elbows are used to change the direction of the pipeline, while tees and crosses can split or merge the flow. Couplings are used to connect two sections of pipe, and valves can be used to control the flow or pressure of the pipeline. Caps are used to
There are four main types of pipe fittings: elbow, tee, reducer and cap. Each type of fitting serves a different purpose and has a unique shape. Elbow fittings are used to change the direction of a pipe, tee fittings are used to split a pipe into two, reducer fittings are used to connect two pipes of different sizes and cap fittings are used to seal the end of a pipe.
There are five common types of fittings: elbow, tee, wye, cross, and coupling. Elbow fittings are used to change the direction of a pipe, tee fittings are used to connect three pieces of pipe together, wye fittings are used to connect two pieces of pipe together at an angle, cross fittings are used to connect four pieces of pipe together, and coupling fittings are used to connect two pieces of pipe together.
There are five common types of pipe fittings: elbow, tee, wye, cross, and coupling. Elbow fittings are used to change the direction of a pipe, tee fittings are used to connect two pipes, wye fittings are used to connect two pipes with a Y-shaped fitting, cross fittings are used to connect four pipes, and coupling fittings are used to connect two pipes.
PVC fittings are used in a variety of applications, from plumbing to furniture making. They are available in a wide range of sizes and shapes, and their names often reflect their function or the type of joint they are used in. Common PVC fittings include: Elbow: An elbow fitting is used to make a 90-degree turn in a PVC pipe. Tee: A tee fitting is used to connect three pieces of PVC pipe together, creating a T-shaped joint. Cross: A cross fitting is used to connect four pieces of PVC pipe together
COPYRIGHT © 2019
