Best Pipe Clamps in 2020



IWISS PEX Cinch Clamp Tool for Fastening Stainless Clamps from 3/8-Inch to 1-Inch with Calibration Gauge Suits ASTM F2098 and Non F2098 Ear Hose Clamps Review:


I am "building" a Whole House Water treating system and "went back and forth" between going from a PEX main to a CPVC set up to a full PEX set up. I then "went back and forth" between going copper crimp rings and stainless cinch rings. After MUCH research and personal experience, I (comfortably) decided on the stainless steel cinch rings and more specifically, this tool... A much better value then a copper ring crimping tool set . Secondly, it is easier to remove the stainless steel rings if one needs to. In what I am doing, I primarily am working with 1" piping and a little 1/2".

This tool is a good quality for the price. I like the ratcheting feature. I have read some reviews about working 1" inch send out does not concern me. The tool looks heavy enough to manage it.

While I have not used it as of this review, I am very pleased with the quality and price of this tool..
UPDATE : I FINALLY got to use it. I am currently using on all 1" (Sharkbite Brand) rings/clamps with no issues. (No tool twisting etc.) I can see where some folks may have issues on 1" trying to clamp, but begin a maintenance proffessional, I would say it is normal. One just needs to get into a good position to leverage ones strength. One can also use physics by putting two 1" X 1 foot PEX pieces (or similar) over the handles extending ones leverage. Made it much easier. I did most of mine without "the help"... Worked great...



iCrimp PEX Cinch Tool with Removing function for 3/8-inch to 1-inch Stainless Steel Clamps with 1/2-inch 20PCS and 3/4-inch 10PCS SS PEX Clamps and Pex Pipe Cutter- All in One Review:


I just finished my 1st PEX plumbing project with this kit and it worked great. The cutter cuts 3/4" PEX easily and cleanly. The crimp tool worked perfect also, both for crimping and cutting off the clamps I had mistakenly crimped, before getting all the fittings positioned properly. This was shipped quickly and was priced very competitively. Be careful to protect your eyes when cutting off the crimped clamps, the cut clamp can become a projectile shooting off in unexpected directions. This tool does require a bit of force to initiate a crimp but not excessive. The crimp tool is a few inches shorter than the much more expensive versions you find in big box stores which is likely the reason it requires a little more effort to initiate the crimping process, I'm sure this compact tool provides a little less leverage than the $60+ crimp tools that are heavier duty and have longer handles. then again, the more compact size makes it is easier to store in a tool box, bin or drawer and is probably easier to hold steady while positioning on a loose clamp because it is lighter and more maneuverable in tight spaces.



Sutemribor 304 Stainless Steel 7-21mm Single Ear stepless Hose Clamps Assortment Kit, 128PCS Review:


Nicely organized set of stainless steel ear clamps. Using the proper set of pliers, these clamp down very nicely and appear to hold very well. Removing them is as simple as taking a small flat head screwdriver and prying up on the end.

The only negatives I have for these is that the crimped "ear" can be quite tall if it doesn't fold correctly. Also, reusing any of the clamps looks to be a no go (at least without considerable effort). There is a very small part that is bent on the end of the clamp that is a super pain to get back in place.

Overall, these do a great job clamping and are super quick and simple to install. If you're not concerned about the clamps being single use, then you should have no problem with them. Would recommend.



LOKMAN 20 Pack 1/2 Inch Stainless Steel Cable Clamp, Rubber Cushioned Insulated Clamp, Metal Clamp, Tube Holder for Tube, Pipe or Wire Cord Installation Review:


I just received a 10pk of these 1/2-in stainless steel cable clamps. They are the real deal. Very high quality steel, beautifully manufactured, thick rubber insulation, and heavy duty just like in the old days. Yes, I know, it's hard to believe in these days of cheap and cheaper stuff on the market. But it's true. Buy some and see for yourself. A big thank you to the manufacturer and the seller. And a big thank you to Amazon for facilitating these transactions. :)



IWISS PEX Cinch Clamp/Ear Hose Clamps Tool for Stainless Steel Clamp from 3/8-inch to 1-inch with Calibration Gauge 20pcs 1/2-inch and 10 pcs 3/4-inch Clamps Suit ASTM F2098 Standards Review:


I am "building" a Whole House Water treating system and "went back and forth" between going from a PEX main to a CPVC set up to a full PEX set up. I then "went back and forth" between going copper crimp rings and stainless cinch rings. After MUCH research and personal experience, I (comfortably) decided on the stainless steel cinch rings and more specifically, this tool... A much better value then a copper ring crimping tool set . Secondly, it is easier to remove the stainless steel rings if one needs to. In what I am doing, I primarily am working with 1" piping and a little 1/2".

This tool is a good quality for the price. I like the ratcheting feature. I have read some reviews about working 1" inch send out does not concern me. The tool looks heavy enough to manage it.

While I have not used it as of this review, I am very pleased with the quality and price of this tool..
UPDATE : I FINALLY got to use it. I am currently using on all 1" (Sharkbite Brand) rings/clamps with no issues. (No tool twisting etc.) I can see where some folks may have issues on 1" trying to clamp, but begin a maintenance proffessional, I would say it is normal. One just needs to get into a good position to leverage ones strength. One can also use physics by putting two 1" X 1 foot PEX pieces (or similar) over the handles extending ones leverage. Made it much easier. I did most of mine without "the help"... Worked great...



Snap Clamp 1/2 Inch X 4 Inches Wide For 1/2 PVC Pipe White 10 per Bag Review:


We live in Northern Michigan and every single year, a killing frost hits us early and kills our plants just as they're getting ready to produce, so this year we decided to put a hoop greenhouse up over the garden before the frost could get the plants.. These clamps work great! We used pvc pipes for the frame and these clamps to attach the greenhouse plastic to the frame.. They've stayed put through a couple of thunder storms with high winds.

I read one review from someone saying you can't remove them once they're in place. They are hard to remove, but not impossible.. I took quite a few off to place them differently.. All I had to do was carefully pry one end up enough that I could lift it free.. But once they're snapped on, they are strong and keep the plastic where you want it..

We bought 3 sets for a 20' x 12' hoop house, and ended up with a few spare ones. Well worth the money...



FLK Tech 4 Pack 3/4” Wood Gluing Pipe Clamp Set Heavy Duty Review:


Been using up scrap wood to make shelves for my Gorilla shelves. Easy to lop to length and stack them along the pipes. Then I have enough I glue them up. Now I'm setting car parts on 2 by sturdy shelves instead of the 1/4 inch particle board that came with the shelves.



ISPINNER 40pcs 3/4-inch Stainless Steel PEX Cinch Clamp Rings for PEX Tubing Pipes (3/4-inch-40pcs) Review:


Came in a real nice box to keep them in. heck the box was worth half the price i paid! good clamps and have used half so far with no issues with them at all. buy these to just to store in your toolbox.

EDIT. First ones i used back in February 2019 still working great. Have used nearly the whole lot and will have to resupply. Will be buying these again.



ISPINNER 50pcs 1/2-inch Stainless Steel PEX Cinch Clamp Rings For PEX Tubing Pipes (1/2 inch-50pcs) Review:


Came in a real nice box to keep them in. heck the box was worth half the price i paid! good clamps and have used half so far with no issues with them at all. buy these to just to store in your toolbox.

EDIT. First ones i used back in February 2019 still working great. Have used nearly the whole lot and will have to resupply. Will be buying these again.