4.5/5
45MM DIAMETER: The 45mm diameter glycerine filling gauge, reading 0~ 40mpa, 0~6000 PSI, indicates that it is very suitable for outdoor use.
APPLY FOR: Easy to install and use. The paintball charging adapter is connected to the SCBA (fire fighting) tank using tight CGA347 nuts and threaded joints.
EASY TO READ: This paintball charging adapter inflators are designed for convenience and reliability. Easy to read pressure gauge, durable fittings.
UNIQUE DESIGN: 6000psi fill station designed for filling a paintball HPA tank, or an air rifle from a SCBA (fire fighting) tank.
SMOOTH DESIGN: This paintball fill station Knob type exhaust valve, the air outlet is very smooth, which is safe to use and premium for long service time.
$234
a week before the anticipated delivery date.Simple but attractive packaging.It accomplishes my goals perfectly with little use.The length of the hose and the amount of air expelled during the pressure release stage indicate that it is not microbore.I gave it a four instead of a five because I haven't used it for very long, but it should work wonderfully anyway because there isn't much that can go wrong.
4.4/5
N Logo is on the Scuba - If it isn't on there then its not a Ninja
Ninja Brand Scuba Fill Station
$234
Instead of using the Crosman model, I bought this manifold so I could fill my PCP air rifle. The Crosman is substantially more expensive despite having a similar appearance. A major feature is the quick disconnect 3/8" female hose connector. Maximum pressure for the manifold is 3000 PSI. The pressure gauge's maximum reading is 6000 PSI. easily attaches to the K valve on a diving tank. On the bottom of the yoke of the manifold are clearance cutouts for a J valve. The pressure relief valve's bushing seals the manifold effectively without the need for excessive torque. The gauge's small size and narrow scale make it inaccurate (1K PSI increments). Compared to the gauge on my rifle, it typically reads low. I rely on the rifle's pressure gauge to show when the magazine is fully inserted. If you use the entire ambient pressure of the tank, filling may be a bit challenging. My gun runs at 2K PSI, while the scuba pony bottle is filled to 3K PSI. When the diving tank is full, filling the air rifle reservoir just only a very tiny turn of the scuba tank valve.
4/5
DURABLE WITH SMOOTH MOITION, sleek stainless steel construction brings smooth upward and downwards motion; 8mm copper female quick connector allows this pump to withstand over 10,000 times of tear and wear.
USER-FRIENDLY DESIGNS, built-in oil and water separator for convenient operation; TPR padded grips for fatigue-free hand feelings, large gauge provides easy-to-read parameters.
WIDE APPLICATIONS, compatible with most PCP pistols, rifles and air guns.
COMPACT & FOLDABLE FOR EASY STORAGE, 4mm detachable & foldable pedal for easy storage and transport, perfect to carry it around in your vehicle for unexpected use.
HIGH PRESSURE WITH SAFETY, high pressure goes up to 4500psi; copper female connector sealed by polyfluorene ensures leak-free performance; 21.7†flexible micro-bore hose can bear up to 80MPA pressure, safeguarding your safety with superior quality.
$234
Remove the plug from the choke before testing the pump.I made the error of trying the motion when the product first arrived before learning there was a piece sealing the chock. After pressurizing, I unintentionally sent this seal plug flying through my apartment quickly as I withdrew the chock sleeve. It could have damaged our sliding door or could have taken out my eye. To depressurize the pump, you can loosen a little valve that is located opposite the pressure gauge. When you want to expand something, tighten. This pump worked well to fill my 30.5ci, 3000psi paintball tank. It need some time. The construction has some play, which I'm not sure about, but it seems to have held up. Keep an eye on your o-rings. There is a warranty included, just in case.
3.9/5
Heavy duty Tank Connector
Made in China
40 inch stainless steel dual braided hose
$234
There are no leaks unless the CO2 chills it too much, in which case the valves are not rated for such cold. This works well and is manufactured rather well (and the price would be far higher if they were). Gladly, that's not a problem if you follow the correct steps. I've seen various videos posted that explain how to utilize one of these, however I disagree with some of their recommendations. Here are some pointers I suggest:Before refilling, totally empty the bottle, and I do mean completely. There is absolutely no remaining pressure in the tank.Place the bottle in the freezer for a few hours after being fully empty.After taking it out of the freezer, quickly refill the tank. This helps the tank draw more CO2 from the feeder tank and cools the CO2 entering the tank.With the help of these suggestions, I can fill a 12 ounce tank to capacity without having to bleed any gas, which saves CO2.
3.7/5
4 stage high pressure hand pump, pressure goes up to 4500psi, with smooth upward and downwards motion; copper female connector sealed by polyfluorene ensures leak-free performance; 21.7†flexible micro-bore hose can bear up to 80MPA pressure, safeguarding your safety with superior quality
304 stainless steel,8mm copper female quick connector allows this pump to withstand over 10,000 times of tear and wear
Compatible with most PCP pistols, rifles and air guns.Applications: Great for automobile tires, motorcycle tires, bicycle tires, inflatable kayaks, inflatable balls etc
Built-in Double-deck oil and water separation function, helps air filter system removes of harmful moisture.Bleed valve to prevent oil and water into your equipment, flexible micro-bore hose for convenient filling
Bleed Valve and Folding Footplate Design;Ergonomically designed handle for comfortable use;Folding footplate for space saving and easy storage;Flexible micro-bore hose for convenient filling
$234
It took me about 10 minutes to put things up after getting. extremely simple Along with a ton of additional accessories, all necessary tools are provided. I had never used a hand pump before and anticipated it to be quite tedious and time-consuming. It took me no time at all to fill my PCP tank. It took, in my opinion, very little work. This pump actually does function well. I had little trouble filling my urban 22 and marauder 25. In fact, before this specific pump, I had plans to buy a filling station, but after seeing how wonderfully it works, I've changed my mind. In a few months, we'll check in to see how it's holding up. But as of right now, after 15 to 20 fills, it's an A product.
3.7/5
MULTIPLE APPLICATIONS - This pump is perfect for all Pre-Charged Pneumatic (PCP) compressed air needs. Quickly and safely fill all the tanks used with paintball and airsoft equipment, unlocking the capabilities of the finest sports equipment. Refill SCUBA tanks and rescue equipment at home and avoid SCUBA shop expenses. The pump also serves other PCP needs such as firefighting, pressure- and leakage-testing, and automotive uses.
POWERFUL - This compressor produces high pressure quickly and efficiently with maximum pressures of 4500 PSI / 30 MPa / 300BAR. The portable unit weighs in at 18kg / 40 lbs and runs on a standard 110V outlet, pulling around 8 amps. The water-cooled compressor charges quickly at 50 L/min.
ADJUSTABLE PRESSURE - This pump is designed for superior ease of use. Set the desired pressure needed for the tank being filled and let the machine do its work. The pump will automatically stop when the pre-set pressure is reached. The maximum pre-set pressure is 30 MPa, and any pressure under the maximum can be pre-set for each tank to be filled.
COOLING SYSTEM - The pump is designed with a self-contained water cooling system and its system temperature is monitored by a battery-powered digital thermometer. You will prepare the cooling water to be used by the system in a bucket that the unit will draw from and return water to for cooling and recirculation. Always monitor the temperature display and water supply when using the pump to avoid overheating.
SPECIFICATIONS - Runs on standard 110V 60Hz single phase outlet, powered at 1.80 KW, Working Capacity: 50 L/min, Alloy construction, Charging rate: 40-50 L/min, 1.5 - 1.8 cfm; Pressure indicated by gauge, Uses lubricating oil ISO VG46 or AW 46, 360mm x 200mm x 380mm, weight 18 kg, noise less than 78 dB, air hose connector 8 mm quick-connect fitting, One Year Warranty
$234
If you are just starting out with PCP airguns and have bought a hand pump, you should be kicking yourself in the butt right about now. Not only does this compressor fill your tanks with dry air in record time, safely, and practically without any effort on your part, the only word that can adequately describe it is awesome! The spare parts bag is missing from mine, but everything else has been wrapped with it and is done so extremely carefully. The device is absolutely worth every money, and I'm contacting right away to see if I can get a replacement parts bag because I'm sure it was just a mistake. I tested it on each of my three PCP air rifles separately and on my 74 cubic foot carbon fiber tank. Depending on the size of the reservoir on board, it feels firearms in minutes or seconds. From 2000 psi to 4250 psi, you're looking at roughly 32 minutes, so I would suggest it in two separate usages. The machine automatically timed out before I achieved the 4500 pressure threshold on my first try to fill the 74 cubic foot tank. The next time I tried to fill the tank to 4500 psi, I noticed the needle inside the pressure gauge started jumping a little bit more once it reached 3000 psi. I applied a little pressure with my thumb and it calmed down, allowing it to reach a higher level before hitting the automatic shut-off. If you look at the gauge itself, you can see a small dot at about 4250 psi. Applying a little pressure to the gauge will prevent the vibration from making the needle too jumpy and hitting that place too soon after months and months of back-breaking hand pump workouts. If the needle hits that dot, it activates the automatic shut-off. I don't think it's unreasonable to expect an almost limitless supply of air that comes without effort. My opinion is that getting one is a smart investment, and I advise you to do so in order to spend more time shooting and less time pressing the trigger. I hope this helps, and do keep a watch out for instructional videos and reviews from me both here and on YouTube. Thanks for your time. Enjoy your shooting and share the enjoyment you get from this hobby with someone else.
3.3/5
ASTM compliant
Instruction manual included
US PATENT 6263927
Easy to use
$234
For CO2 tanks, this fill regulator works nicely. To fill all of our little paintball tanks, we use it along with a 20-pound non-siphoned tank.I've learned to expect Ninja to produce products of the highest caliber. It is not unique to this regulator. If cost is a factor, know that I highly recommend this regulator because to its robust and user-friendly construction. In order to guarantee a safe fill every time, Ninja offers a highly helpful customer support team and a step-by-step owners manual that is included. Spending an extra $10 or $20 to acquire Ninja is worthwhile because you'll have peace of mind knowing that you've purchased a reliable regulator.Aside from that, I also advise purchasing a digital hanging scale to weigh the tanks so you can consistently fill them correctly! Keep it secure while you paint!
COPYRIGHT © 2019