Needle-nose pliers are designed to be stiff in order to grip small objects securely. The tips of the pliers are tapered to allow for precise gripping, and the jaws are usually serrated to help grip objects firmly.
No, round nose pliers are not the same as needle-nose pliers. Round nose pliers have a rounded tip that is useful for bending and shaping wire. Needle-nose pliers have a pointed tip that is useful for gripping and holding small objects.
Crimping is the process of permanently connecting two pieces of metal by deforming one or both of them to hold the other. For electrical wiring, this means using a specialized tool to squeeze the end of a wire so that it's flat and can be inserted into an electrical connector. While you can crimp a wire without a tool, it's much harder to do it properly, and a bad crimp can create a weak connection that can cause problems down the line.
Yes, you can cut wire with long-nose pliers. The pliers will grip the wire and allow you to cut it cleanly.
4.8/5
Packaged In A Retail Blister Pack
Serrated blades
Type: Bent Nose
Project type: Robotics, Electronics
$234
Even though I also purchased the Hakko CHP PN-20-M Steel Super Specialty Pointed Nose Micro Pliers with Smooth Jaws, 1.0mm Nose at the same time, I've used these more frequently because of their serrations anytime I've needed a small pair of pliers. Although the machining is merely decent, the build quality is excellent. The jaws are perfectly aligned side to side, however they don't fit together very well, leaving a fairly sizable gap. The fact that they are serrated contributes to this, however I've seen bigger serrated pliers that match up better. Additionally, you want the jaws to be as flush to one another as possible because you'll be utilizing these for very small objects. Which brings me to my other problem with them: the serrations are only side-to-side, so combined with the space between the jaws, things slip through them quite easily if gripped from the side. For example, if you grip a wire so that it runs parallel to the jaws, you'll be fine; if you grip it so that it runs perpendicular to them, good luck. The serrations would function considerably better if they were cross-hatched or even diagonal, with one jaw pointing in one direction and the other pointing in the other direction. Additionally, as shown below, the two jaws have very different thicknesses.For those that require them, the following measurements were made using a digital caliper:Jaw width: 1.21 millimeters at the tip and 2.63 millimeters at the inner end of the grasping section (inner portion of jaws; this is a very arbitrary measurement)Jaw height: 1.70mm/6.55mm combined, 0.99mm
4.8/5
Shape: Other
Materials: Stainless Steel, Plastic
Quantity: 1 Piece
Color:
Measurements:
$234
These pliers are among the best available for their price range, if not the best. These are more than sufficient for my needs, and I'm an intermediate artisan jeweler. They are unquestionably my go-to choice anytime I require a chain-nose plier because they are small enough to fit in confined spaces and handle delicate tasks while being robust enough to withstand everyday use. I can't speak to how well they'd hold up for that because I don't use them for any heavy-duty chain-mail type designs (I only occasionally get up to using them higher than 18 ga jump rings).The grip is really cozy, and the spring action is effortless and smooth. I've had two pairs for about two years, and they still function just as well as they did when I initially bought them.You must be cautious not to nick your wire, as you would with any non-rubberized tool.
4.5/5
Machined jaws provide maximum gripping strength. Induction hardened cutting edge stays sharp longer
The ProTouch grips provide extra comfort and reduce hand fatigue
Features durable nickel chromium steel construction
These pliers feature a superior long reach design for work in confined areas
$234
These small pliers are quite lovely. Irwin tools feel more ergonomic, so I've been buying more of them lately. These fit my petite lady hands pretty well. They are reliable and accurate. They have been helping me cut and shape copper wire. With these pliers, I can create incredibly cute small loops to wrap around screws.They're a little bit tiny, but that's my only issue. That's entirely my fault for not purchasing a larger size; it's not a design issue. And I'll undoubtedly purchase the larger model of these if I decide to purchase larger ones.
4.5/5
Half round, long jaws with serrated gripping surfaces.
Plastic coated handles.
Induction-hardened cutting edges that cut medium hard wire up to 3.2 mm in diameter and hard wire 2.2 mm in diameter.
High-grade special tool steel, forged, oil-hardened.
Elastic precision tips
$234
To twist and tighten wires and ties made of various gauges of stainless steel, I primarily use needle nose pliers. All of the needle nose pliers I've previously used break after only a few twists, placing a heavy lateral stress on just one tip, which is then likely to bend out of alignment. Under heavy loads, Knipex needle tips do twist and move out of alignment, but unlike other brands, they always return to their original shape undamaged. This is really fascinating to me. Although Snap On needle nose pliers are stronger, this model appears to be built to twist and bend under pressure before returning to its original shape and alignment without bending. Snap On pliers are significantly more difficult to bend, but once bent, they cannot be unbent. I can still pick up a single hair strand with Knipex pliers after numerous twists and bends. My Snap On pliers are unable to.
4.5/5
Crimps non-insulated connectors, lugs and terminals
Forged steel for maximum durability
Strips 10-18 AWG Solid and 12-20 AWG Stranded wire
6-32 and 8-32 screw shearing
Strips, cuts, loops, crimps and shears
Long nose for extended reach, grabbing and looping wire
Dual material Journeyman handles provide better grip
$234
These Klein needle-nose pliers have been in my possession for around eleven months. During that time, I have tested them in a variety of settings, including commercial, residential, industrial, and everything in between. These have endured quite well. An electrician will find these pliers to be a very comfortable fit because the internal spring still maintains the right give and take. The only flaw I could find with these pliers is that the worker takes a 50/50 chance on getting the pliers turned correctly because the cutting blade is only on one side of the tool. Although it may seem insignificant, in a world full with obstacles, this might cause unnecessary difficulty. The tiny tip makes braiding more than three wires together while assembling joints in boxes quite difficult.This is my most-used hand tool, excepting some tiny drawbacks. I've given it the worst, and I haven't encountered a single issue.
4.4/5
CHANNELOCK's knife and anvil style cutting edge ensures perfect mating and superior cutting edge life
Made in the USA
with side cutter
High-carbon C1080 steel for superior performance on the job and electronic coating for ultimate rust prevention
Crosshatch pattern on jaws grips work tightly
$234
Okay, people who work with tools every day have extremely strong opinions about needle nose pliers. Your mind will be blown by the diversity of options when you ask any tech from any industry what brand and size pliers they have chosen for their line of work. I first worked in the automotive, home, commercial, and sound reinforcement industries before switching to industrial electrical work and finally to industrial automation/programming. I've worked in the aforementioned fields for 30 years, and one thing that hasn't changed is that I've always owned a pair of Channel Lock six- and eight-inch needle tip pliers. They are not the pliers you should have on hand at all times, I'm not suggesting. But despite having a lot of other speciality varieties, I've always had these two sets in my box as well. They are also kept in my toolkit at home. They are the best needle nose pliers you can own all around. The points fit together perfectly, and using them is comfortable. If they fall off the object you are working on, they do not bite your hand. Look attentively at the intersection of the handles to help with that last statement. When the wrench is closed, you can see that they are not touching. They are sturdy and long-lasting. Do as I say and include both sets in your toolbox. You won't be dissatisfied.
4.2/5
Classic trigger release designed to provide maximum locking force
Set includes 7" curved jaw locking pliers with wire cutter and 6" long nose locking pliers with wire cutter
Constructed of high-grade heat-treated alloy steel for durability
Hardened teeth are designed to grip from any angle
Ideal for tightening, clamping, twisting, and turning
$234
Stunningly poor Irwin produced quality tools. The tools were remained quite good even after they relocated to China. Irwin is now selling to those who may require them for light duty three times a year, which is evident in the price, or maybe Amazon sold me cheap copies. I needed new vise grips to replace my old, worn-out ones. I am unable to compare because these fell so far short. Even if they have been abused for years and are damaged and wrecked, my 25-year-old set will outshine them. If you and your wife require some simple home tools, buy them. If you want professional tools, don't get these. Irwin Tools, you should be ashamed for profiting off your name. On the tool, it even says "original."
3.8/5
Professional quality
Material: high carbon steel
Durable comfort grip handles
Hardness: 55
Double leaf spring
$234
These pliers have received a number of really unfavorable reviews. Some remarks look utterly absurd, which may be indicative of poor quality control. The pliers I received feel quite robust, are well-made, and are really sturdy. Other unfavorable reviews claim that the grasping heads lack a point, which is a valid complaint (ha ha). Look elsewhere if you require a "genuine" point for fine tasks like repairing jewelry. THESE ARE GREAT if you require an extremely sturdy pair of pliers that will probably outlive you! The one thing I won't use them for is jewelry; I bought them for car repair.
3.8/5
★Twin-blade wire cutter snips copper, aluminum, and soft steel wire
★100% quality assurance and 60-days money-back guarantee, leave us message if you have any problems
★This needle nose pliers is made of forged and hardened carbon steel for durability use, nonslip plastic-dipped handles provide sure handling and control
★Self-opening, leaf Spring loaded design makes this long nose plier easier to use and relieve fatigue
★Long, tapered nose pliers with fine tips to work in hard to reach areas, excellent for hobby, craft use, jewelry making, artisans, electricians, grips small parts, bend wire, electronics repair, small object gripping, etc
$234
They are a GREAT pair of pliers, despite the fact that I bought them for jewellery making and they are bigger than I needed (I should have read the description more carefully). really strong construction. They would make a wonderful addition to any handyman's—or woman's—toolbox and are still useful for less-detailed jewellery creation.
It's not always possible to tighten a nut without a tool, but if you have a strong grip and some patience, it can be done. Start by holding the nut in your hand and turning it clockwise. If it's too tight to turn by hand, try using a pair of pliers. If the nut is still too tight, you may need to use a wrench.
There are many types of pliers, including needle-nose pliers, slip-joint pliers, locking pliers, and lineman's pliers. Each type of plier is designed for a specific purpose. Needle-nose pliers are great for reaching into tight spaces, while slip-joint pliers are ideal for gripping and twisting. Locking pliers are perfect for holding onto something that you don't want to let go of, while lineman's pliers are designed for cutting and stripping wire.
There are a few substitutes for pliers, depending on what you need them for. If you need to grip and twist something, you can use a wrench. If you need to cut something, you can use a knife or scissors. And if you need to bend or shape something, you can use a hammer.
A flat nose plier is a type of plier that has a flat, serrated jaws. These pliers are used for a variety of tasks, including gripping and holding wire, bending wire, and cutting wire.
Needle-nose pliers are a type of pliers with long, thin jaws that taper to a point. They are useful for gripping small objects or for reaching into tight spaces. Needle-nose pliers are often used in jewelry making, electronics work, and other delicate tasks that require a precise grip. They can also be used to bend wire or to cut small pieces of material.
COPYRIGHT © 2019