A kegerator is a great way to keep your beer cold and fresh, but can you leave it outside? The answer is yes, but there are a few things to keep in mind. First, make sure the kegerator is in a well-ventilated area so the beer doesn’t get too warm. Second, keep the keg itself as cool as possible by storing it in a cool, dark place. And finally, don’t forget to cover the kegerator when you’re not using it to protect it from the elements.
A kegerator is a great way to keep your beer fresh and carbonated, but can you keep it in the garage? The answer is yes, but there are a few things you need to take into consideration. First, your garage needs to be temperature controlled. If it gets too hot or too cold, your beer will suffer. Second, you need to make sure your kegerator is on a level surface. If it's not, your beer will foam and you'll end up with a mess. Finally, you need to be careful of critters. If you live in
Yes, canned beer can be poured into a keg. There are a few things to keep in mind when doing this, such as making sure the keg is properly cleaned and sanitized before adding the beer. Additionally, it is important to pour the beer slowly and carefully so as not to foam or splash it.
A keg can be refilled if it is returned to the place of purchase. The keg must be cleaned and sanitized before it is refilled.
4.4/5
$234
As a surprise for my husband's birthday, I purchased this for our garage refrigerator. He was overjoyed. With the exception of the hose clamps, every component is of exceptional quality. Due to the plastic hose clamps' inadequacy and difficulty in tightening, we have encountered a minor gas leak. I deducted one star simply because it can be easily fixed with a couple metal hose clamps from the hardware shop. It would be a 5-star product if the clamps were upgraded to the same standard as the rest of the package!Be aware that not many CO2 carriers give refills for your existing tank and that most (at least in our area) want you to trade in the tank. Since we have this fancy fun tank and don't want to trade it in for a worn-out one, this has been a little bit of a hassle for us. In retrospect, I should have bought the package without the fancy tank and asked our local provider for a trade-in. Instead of driving to the location that fills them and waiting, it would be so much simpler to simply grab a trade. No offense intended to the manufacturer; it's simply something to bear in mind if you intend to install a kegerator.
4.2/5
Stainless steel guardrail & drip tray; Four (4) casters included; Black cabinet & stainless steel door; Reinforced stainless steel floor
Forced air-cooled beer tower; Safety lock; Reversible door; Professional door handle
Low profile “D coupler; Draft components included; Temperature Range: 32 60°F; Possible Keg Configurations: (1) slim quarter, (1) 1/6 sixth barrel, or (1) Cornelius keg
Front ventilation; Forced air refrigeration; Digital thermostat; Interior LED lighting
PLEASE NOTE: Delivery will be curbside, inside delivery is not available. A valid phone number is required for delivery purposes, please ensure the correct phone number is provided in your shipping information when placing this order.
$234
Positives - Well-designed. I liked the setting choices it provided (feet versus casters, RH door swing vs LH, longer screws for countertop mount vs as shown mounted to the top of unit). It was carefully wrapped to prevent damage. swiftly showed up as promised. Overall construction feels solid. Above-average fitness and performance.Opportunities exist in the drip tray, which seems out of place because it just rests on top of the unit and isn't finished up to look like one. I routered a countertop insert so it inlays properly, but if I were to use it as a freestanding unit, I wouldn't like the way it looks now. The light was hanging when the item arrived, so you had to find out how to mount it. If the pouring valve is bumped, rolled around, has a heavy tap handle, or is pressurized with CO2, it will drizzle because the valve has minimal pressure in the shutting position. A few sections lacked adequate, complete, or coherent instructions. I wish there had been a template for tracing the mounting holes and drill holes for the draft tower.Conclusion: Although it has a nice appearance, there isn't much to enjoy about it once I've installed and sorted it out. I would advise it.
4.1/5
This nsf approved 3-1/2 diameter air-cooled stainless steel draft beer tower
Heavy duty faucet wrench: make repairs and adjustments to your draft beer system like a pro using this heavy-duty faucet wrench
12 inch
These NSF-approved Kegco KT85D-L "D" System Keg Couplers
Durably constructed to deliver a consistent flow pour after pour
$234
I purchased this item to transform a used small fridge into the centerpiece of my man cave. It was exactly what the doctor had prescribed. Each item arrived individually packaged in a larger box, with no signs of damage from the rather swift shipping process. The tower/tap is likely to continue to work for many years because everything is of high quality construction. Nothing can go wrong with this product.Some ideas for individuals considering conversion:1. Keep in mind that keg beer is unpasteurized and only lasts one to one and a half months when deciding between a one tap tower and a two tap tower. The 1/6 barrel standard keg, the smallest size available, holds about 5.3 gallons. Therefore, unless you always have a large number of beer drinkers, a two tap tower may be an unnecessary extra expense.2. I wouldn't advise purchasing a brand-new mini-fridge because you run the risk of ruining it if you place the beer line hole incorrectly. After only a few days of searching online (on Craigslist), I discovered a used one for $60 that would do (look for one without a freezer).3. Once you get this equipment, the conversion process should only take 30 minutes from start to finish because there are PLENTY of videos online that demonstrate how to convert a fridge without damaging it.4. Gas supply shops provide CO2 for a much less money than beverage supply shops do. At Airgas National Welders in SC, I can fill up on food-grade CO2 for $15.I hope this information is useful and that you will appreciate your kit as much as I do. Enjoy Your Drinks!
4/5
Dimensions (fridge only) 33-1/4" H x 17-1/2" W x 18-1/4" D; For freestanding use only
Digital Thermostat; Internal blue LED lighting; Internal circulation fan; Not compatible with casters
Includes: One (1) 2.5 stainless steel beer tower with stainless steel faucet; One (1) 2.5 lb CO2 tank (empty); One (1) single gauge regulator; One (1) stainless steel D coupler; One (1) 5 ft. 3/16 in ID beer line; One (1) 5/16 in ID gas line
PLEASE NOTE: This kegerator is designed to fit one sixth barrel or one Cornelius keg only
If planning to use a ball lock keg a homebrew conversion kit will need to be purchased separately
$234
My kegerator has been here for more than a month, and it's amazing! The thermostat, which always reads 37 degrees no matter the temperature, is the only reason I didn't give it five stars, but I installed a thermometer and it functions just fine.To achieve a 40 degree beer, I have to keep mine set to 32 degrees. Always check the beer's internal temperature; anything above 40 degrees will result in frothy beer, so KEEP THOSE KEGS COLD! You may wish to keep the beer colder than the preferred temperature because there may be a 4 degree variation in temperature between the kegerator and the beverage itself. It took me a very long time to understand why my first keg was constantly foaming. 80% of the time, the issue is usually the temperature.Although the language on the instructions was somewhat small, setup is fairly simple. comes with a ton of additional parts, so don't worry if there are any left over after hooking it up.Additionally, I advise purchasing a cleaning kit. Once you get the hang of it, cleaning is simple, and I purchased this model, which is excellent: https://smile.amazon.com/gp/product/B00TWMGW9K/ref=oh aui detailpage o04 s00?ie=UTF8
3.9/5
Dimensions (fridge only) 33-1/4" H x 17-1/2" W x 18-1/4" D; For freestanding use only
Digital Thermostat; Internal blue LED lighting; Internal circulation fan; Not compatible with casters
Includes: One (1) 2.5 stainless steel beer tower with stainless steel faucet; One (1) 2.5 lb CO2 tank (empty); One (1) single gauge regulator; One (1) stainless steel D coupler; One (1) 5 ft. 3/16 in ID beer line; One (1) 5/16 in ID gas line
PLEASE NOTE: This kegerator is designed to fit one sixth barrel or one Cornelius keg only
If planning to use a ball lock keg a homebrew conversion kit will need to be purchased separately
$234
I was a little apprehensive to buy because I had read a lot of reviews that discussed a wide range of issues, but things are going well so far. I adore this item to pieces. Despite what some monkeys stated, it was surprisingly simple to put together. It doesn't take up much room, runs quietly, keeps beer ice cold (not even on the maximum level), insulted tower to keep it cold all the way to the glass, and contains a full size keg of Molson Canadian, my favorite beer. With every kegerator, the most difficult step is finding the exact regulator for your brand of beer. I spent $13 to fill the 5# CO2 tank at my neighborhood home brew shop, put a keg in, connected the coupler, set the psi as accurately as I could, and then I could start enjoying delicious tap beer. Every beer is different, but for the majority of American lagers, it seems to be fine. I have mine pretty much at the optimum psi at 9 to 10. (elevation not accounted for). In addition to what is already included, you might want to purchase a cleaning kit, some faucet plugs, and possibly a dual gage regulator. Besides that, there is with everything you require aside from the beer and gas. But if you want a reasonably priced, high-quality single tap, this one is the one for you.Don't forget the plastic washer that is attached to the CO2 tank and goes on the line from the tank to the coupler, as a side note. When I went to Home Depot to get one because I assumed I had misplaced it or hadn't received a second washer, I discovered it on the tank when fiddling with the regulator.
3.9/5
For a black version please see model KC2000TWIN, for a single tap KC2000SSA, single tap in black KC2000
For freestanding use only and indoor use only; 5 lb. CO2 cylinder (supplied empty) included with external or internal mounting capabilities
Stores up to a full sized half shell Sankey standard keg or two sixth kegs; does NOT support use of Coors, Miller rubberized or other oversized kegs
Dimensions: 50-7/16" H (includes tap & casters) x 20-3/16" W x 20-1/16" D (Depth w/ external tank mounted: 30-1/2") (Height w/out tap and casters: 33-1/8"); Warranty 90 days labor 1 year parts
Temperatures: Low 30s to mid 40s degrees; rolling casters included for easy mobility; Protective floor plate
$234
This device was recently bought and put together as a gift for my father. This is my sincere opinion based on my experience with the unit.First of all, the packaging it was received in was not the best. Despite being double-boxed, the inside box's bottom was completely torn out, allowing it to travel within the outer box. I think at least one of the following flaws was caused by this. Part of the metal frame at the bottom of the door face was warped outward, which until it was smashed back flush with a hammer was interrupting the door seal (which would have allowed cold air to escape), and one of the two interior shelves was hurriedly pushed into the interior of the unit during packaging and was half bent; I could not fully unpack the unit because of these issues.The CO2 and beer line tubing are both PVC based; I will be upgrading the beer lines to an antibacterial sanitary grade tubing at a later time (Ultra Barrier Silver); beyond this, the unit itself is fairly well built; the parts are all of average quality, and the unit itself holds sub-40 degree temperature well.The drip plate is also just a piece of cheap rectangular plastic that sits on top of the unit under the taps, and unlike most drip trays on the market it does not have an inset curved shape to set flush around the tower, so it just awkwardly sets there and looks out of place. These are my final complaints about the unit: the sides (but not front or rear) get HOT on the outside, more so than any minifridge I've ever owned.Overall, this unit was worth the money compared to restoring an old Kegerator that we had with a new dual-tap Kegko kit (that project was about $80 less overall than buying this new unit), though I will be upgrading a lot of the components here, including the drip tray, taps, beer line tubing, and possibly the regulator.UPDATE: January 3, 2018Just wanted to add a few notes after a few months of use and upgrades: the included spring-loaded taps tended to be leaky here and there, mostly likely from not being fully pushed back into the closed position by the user. the included PVC lines have been fine as long as they are cleaned (we use Regal Marketing Kegerator Beer Line Cleaning Kit). we haven't switched them out to a different tubing yet.
3.9/5
For a black version please see model KC2000TWIN, for a single tap KC2000SSA, single tap in black KC2000
For freestanding use only and indoor use only; 5 lb. CO2 cylinder (supplied empty) included with external or internal mounting capabilities
Stores up to a full sized half shell Sankey standard keg or two sixth kegs; does NOT support use of Coors, Miller rubberized or other oversized kegs
Dimensions: 50-7/16" H (includes tap & casters) x 20-3/16" W x 20-1/16" D (Depth w/ external tank mounted: 30-1/2") (Height w/out tap and casters: 33-1/8"); Warranty 90 days labor 1 year parts
Temperatures: Low 30s to mid 40s degrees; rolling casters included for easy mobility; Protective floor plate
$234
In the last 20 years, I've had three kegerators, and this one is by far the best. Without VAT, $429 was transported to my home! The thermostat had to be moved to the top of the interior of my previous two Danby units, which never truly got cold enough (below 40) on their own. When I don't have home brew or a keg from my neighborhood microbrewery, I normally have light Pilsner like beers on tap. So, for inexpensive lite beer, the cooler, the better...Anyway, this one can be cooled down with NO PROBLEM! The first night, I put a glass of water with a meat thermometer inside, and the next morning I found that it had frozen with a reading of 30°F inside!My hardware is decent for what it is. The faucet has a spring-loaded return and is of medium quality. The co2 regulator is most likely a MicroMatic brand, which is a decent one, and the Sankey coupler is of good quality. Additionally, it is helpful to carry an extra CO2 cylinder. Overall, this is a great setup for beginners.I started by replacing the inexpensive plastic drip tray with a nice-looking stainless steel one I already owned. I also replaced the faucee with a sturdy, premium stainless steel one that I had purchased from MicroMatic in the past. Since I enjoy the better quality feel and all-stainless construction, this was significant to me.The only other item I upgraded was my dual gauge CO2 regulator, which I had been using on my previous system instead of a MicroMatic. The supplied regulator will be kept by me as a spare.I'm shocked by how cold this thing gets overall, and I was also taken aback by how much smaller it seems compared to my older kegerator. In comparison to my old one, it is about 1" narrower. Given that there are less cubic inches inside, which implies there is less room for the compressor to cool, I wonder whether this is a deliberate decision. Additionally, the cooling dish is far larger than my old kegerator.I would repurchase this at a fantastic price and suggest it to all of my friends.
3.9/5
For a stainless steel version please see model KC2000SSTWIN, for a single tap KC2000, single tap stainless KC2000SSA
Temperatures: Low 30s to mid 40s degrees; rolling casters included for easy mobility; Protective floor plate
For freestanding use only; 5 lb. CO2 cylinder (supplied empty) included with external or internal mounting capabilities
External Dimensions: 48 1/2 x 20 1/10 x 24 13/16 (height includes the draft tower); Warranty 90 days labor 1 year parts
Stores up to a full sized half shell Sankey standard keg or two sixth kegs; does NOT support use of Coors, Miller rubberized or other oversized kegs
$234
Since I am new to the kegerator in general and have only used air-pressurized kegs a few times, I am likewise a novice. I do a ton of research before making any significant purchases, and this was no exception. I was hesitant to buy this kegerator because of what I had heard about its temperature controls, but I did so since I appreciated the reviews on Amazon, Edgestar, and associated forums. Free 2-day shipping wasn't an option, but I wasn't aware of it because the package tracking wasn't what I was accustomed to with Amazon Prime. I think I placed my order for this on a Saturday, and it came on a Wednesday night. Overall, I'm very happy. Many others struggled with foaming, I discovered in my research. I also knew that the major commodity I would be using was 1/6 kegs of commercial hard cider products. I found a lot of information on home-brewed cider, but not much on commercial ciders. It was especially advised that the product itself be kept at controlled CO2 pressure and temperatures. My shopkeeper didn't really know the answer when I asked him about pressure. So this is everything I bought and how it ended out. The Kegerator, Kegerator Tower Cooler, Beer line Neoprene Coupling Washers, Kegerator Cleaning Kit, and Taylor 5924 Food Service Classic Series Freezer-Refrigerator Thermometer were the items I purchased. The Taylor thermometer hasn't yet arrived. This kegerator's cooling tower is thinly insulated with polystyrene similar to that used in packaging, which seems to be enough. As I previously mentioned, I also made an immediate purchase of a tower cooler. Utilizing YouTube videos made assembly really easy. I don't now know of any CO2 line leaks that I experienced. The Angry Orchard 1/6th keg was refrigerated by my merchant before I picked it up, and I saw that the temperature was about 2 on the control. After bringing the keg home, I placed it in the kegerator and left it there for about 3 hours without tapping it. I gave it a tap and then set the regulator to roughly 13.5 psi. One thing to keep in mind is that the regulator should have a high pressure gauge that shows the pressure within the bottle so you can tell how full your CO2 bottle is. In order to avoid damaging the regulator, I simply screwed the plug for the high pressure side back up and left it alone when I went to remove it and it appeared to be "locktite"d or something. The first pour and all the others were flawless. Never tasted any other beers before. Anyone searching for a cheap kegerator should consider this product, in my opinion.
3.6/5
Door mount stainless steel drip tray: our popular 10 inch
Durably constructed to deliver a consistent flow pour after pour
These NSF-approved Kegco KT85D-L "D" System Keg Couplers feature
Heavy duty faucet wrench: make repairs and adjustments to your draft beer system like a pro using this heavy-duty faucet wrench
$234
As a surprise for my husband's birthday, I purchased this for our garage refrigerator. He was overjoyed. With the exception of the hose clamps, every component is of exceptional quality. Due to the plastic hose clamps' inadequacy and difficulty in tightening, we have encountered a minor gas leak. I deducted one star simply because it can be easily fixed with a couple metal hose clamps from the hardware shop. It would be a 5-star product if the clamps were upgraded to the same standard as the rest of the package!Be aware that not many CO2 carriers give refills for your existing tank and that most (at least in our area) want you to trade in the tank. Since we have this fancy fun tank and don't want to trade it in for a worn-out one, this has been a little bit of a hassle for us. In retrospect, I should have bought the package without the fancy tank and asked our local provider for a trade-in. Instead of driving to the location that fills them and waiting, it would be so much simpler to simply grab a trade. No offense intended to the manufacturer; it's simply something to bear in mind if you intend to install a kegerator.
3.6/5
Deep chill mode; Dispensing components included; Guard rail, drip tray, & casters included
Fits half-barrel, slim quarter, corny, and sixth barrel kegs; Dimensions (fridge only without casters or tower) 33 1/2" H x 23 5/8" W x 23 3/8" D
PLEASE NOTE: Part number BR3001BL will be shown on the retail box and all needed items that comprise the KC3000TWIN will be included within this same box; Freestanding operation only; Digital display; Adjustable temperature
Includes two (2) wire shelves for refrigerator use; Temperature range: 32-50 °F (0-10 °C)
PLEASE NOTE: Delivery will be curbside, inside delivery is not available. A valid phone number is required for delivery purposes, please ensure the correct phone number is provided in your shipping information when placing this order.
$234
I've put off purchasing one of these for a time. This is awesome! I adore how convenient it is to have two beers on tap at once. Go with artisan beer most often. I can't buy a 12-pack at the store or on my way home from work anymore. My beer is wonderfully chilled and dispensed from this kegerator. have been urging my friends and coworkers to use it.Update... This Kegerator still appeals to me greatly. Approximately one and a half years. The tower mounting screws are not stainless, and the flimsy tap tower mount is a major turnoff. These screws are terrible-looking and have corroded. Will have to go to Home Depot to purchase replacements. Do not comprehend the poor design in the most visually appealing and practical sector.
There is no definitive answer to this question as there are pros and cons to both leaving the CO2 on and turning it off when not in use. Leaving the CO2 on will keep the beer in the keg fresh and carbonated, but it will also add to your monthly gas bill. Turning the CO2 off will save you money, but you'll need to remember to turn it back on when you want to dispense beer. Ultimately, the decision is up to you and what you feel is most important.
Kegs can go without CO2 for a while, but eventually the beer will go flat. How long this takes depends on how much beer is in the keg, how much CO2 is in the keg, and how well the keg is sealed. If a keg is only half full, it will go flat quicker than a keg that is full.
A CO2 tank for a kegerator will last for different amounts of time depending on how often the kegerator is used. If the kegerator is used daily, then the CO2 tank will need to be refilled every two to three months. If the kegerator is used less frequently, then the CO2 tank will last longer.
A tapped keg can last for several weeks as long as it is properly refrigerated. The average lifespan of a keg is about 90 days.
Beer in a keg can last for a long time if it is properly cared for. The average lifespan of a keg of beer is about 90 days, but it can last for up to 6 months if it is kept at the right temperature and pressure. Kegs of beer should be kept at a temperature of 38-40 degrees Fahrenheit and a pressure of 12-14 psi.
It takes a kegerator about 24 hours to get cold. You can speed up the process by pre-chilling the keg in the fridge for a few hours before putting it in the kegerator.
COPYRIGHT © 2019
