4.5/5
This item is not compatible with the First Responder Jack by Hi-Lift.
Serrated teeth along one side helps scrape or level ground for base
Alleviates jack sinkage on soft surfaces
Drilled hole in center of base for convenient storage on jack bar
Rugged construction for strength and durability
Compatible with all standard Hi-Lift brand jacks
$234
This is a great wonderful product; it's much larger, thicker, and more durable than the pictures suggest. Why they didn't include a bolt and wing nut to mount it on the hi-lift jack as indicated in the photographs baffles me, though. A inexpensive mounting bolt that isn't load-bearing would cost only a few cents, saving you the time it would take to travel to the hardware shop and purchase the same thing. The strangest.The description does not specifically mention the serrated edges. According to the instructions, the device should be used as a trowel or scraper to level out uneven ground. Although using the device as a "planned thing" is a little odd, it's a wonderful addition as a backup to a standard trail shovel.
4.5/5
$234
Since I drive a BMW, I was quite hopeful that my problem with raising my car and putting it on jacks would be resolved until I came across these jack stands. It is to a certain extent. I've read several product reviews, but I've also read some that speak directly to the issue I am currently experiencing: some of the drill holes are not precisely drilled, making it impossible for the safety pin to pass through. However, I decided to take a chance and get a pair. The fact that both jacks function well after testing them in all positions and levels surprised me in a good way. As a result, I placed an order for a second set in preparation for the task of raising my car on four jacks. I took these out of the package today to test them after receiving them a few days ago. Unfavorable news. First of all, neither jack's center pipe or component slid all the way down to the lower height. To get it through, I had to strike the rubber. Then, when testing the first jack—pictures attached—the third and fourth holes from top to bottom did not function at all. Simply put, the safety is not getting through. The second jack performed adequately, if not flawlessly. Even switching the center pieces and pipes didn't help. I've already completed the form to swap them out. I'm hoping the next pair will function right out of the box (I only wanted to send one back but was unable to do so). Aside from this issue, this device appears to be reliable, and if I find the proper ones, I'll be sure to feel secure under my car. I would have given it five stars, but as ESCO tightens up their quality control, I will reconsider.
4.4/5
MATERIAL - Steel. High performance Hi-lift Jack mount for Jeep.
Fitment: 2007-2018 Jeep Wrangler JK. Can be installed to Jeep hood hinge and rear door hinge.
INSTALLATION - The Hi-Lift Jack Bracket mounts to existing hood / REAR door hinge holes, eliminating the need for drilling.
FINISH - Powder coated surface, provide you with a lifetime of resistance against wear.
KIT INCLUDED - The bracket includes two threaded knobs to tighten, and a strap that ties to the jacks handle to eliminate movement. All mounting hardware is included. (Hi-Lift Jack sold separately)
$234
I have a lot of EAG things, and this was yet another high-quality item that was perfectly sized and wrapped. The stock countersunk bolts have been replaced with hardware that is included, and the bottom of the brackets now have a rubber base that serves as a gasket. The jack is now a component of the Jeep, and it is extremely sturdy. Additionally, they provide you with a lovely Velcro nylon strap to stop your jack's handle from rattling.
4.2/5
Base Diameter: 2.75" Height: 0.5" Insert Height: 1", does not fit Trolley Jacks
Fits most late model Audis, please ensure fitment by checking listed dimensions. Does not fit many 2018+ Audis
Properly fit the slot when lifting your Audi up and prevent damage
Save from costly repairs or having to replace damage OE adapter areas
New polyurethane construction, still soft enough to prevent damage, yet hard enough to support the jack point
$234
One was purchased for my 2013 C7 Audi A6. makes it quick and simple to lift the car. The adapter is so tightly pressed against the lift point that it may become trapped. I discovered this when it spent the weekend locked in the lifting point and travelled from Wilmington, North Carolina to Norfolk, Virginia, and returned. After getting home, I discovered it and was shocked that it hadn't fallen out. If it does get stuck, just keep in mind not to forget about it.But for the price, it's a fantastic product.
4.2/5
New polyurethane construction, still soft enough to prevent damage, yet hard enough to support the jack point
Fits most late model Audis, please ensure fitment by checking listed dimensions, Does not fit many 2018+ Audis
Properly fit the slot when lifting your Audi up and prevent damage
Save from costly repairs or having to replace damage OE adapter areas
Base Diameter: 2.75" Height: 0.5" Insert Height: 1", does not fit Trolley Jacks
$234
One was purchased for my 2013 C7 Audi A6. makes it quick and simple to lift the car. The adapter is so tightly pressed against the lift point that it may become trapped. I discovered this when it spent the weekend locked in the lifting point and traveled from Wilmington, North Carolina to Norfolk, Virginia, and returned. After getting home, I discovered it and was shocked that it hadn't fallen out. If it does get stuck, just keep in mind not to forget about it.But for the price, it's a fantastic product.
4.2/5
$234
These are outstanding in every way.They are extremely stable when used in PAIRS (they are sold one at a time). Avoid attempting to combine with another jack stand since horrible things will happen. After doing that, I found myself moving an 80-pound jack around my car faster than I had anticipated. Two of these are required, both set at the same height.You have a larger support surface thanks to the flat rubber top. You receive a larger support area because to the wide feet. These won't jack up your frame, as the phrase "normal stands" implies.They only lock one way, however the pin is STRONG. A locking ring is also included. The locking ring locks awkwardly and is somewhat cheap. I'm going to get a nicer one from the hardware shop to replace it.Even the wide feet on the jack stands will bite into soft asphalt and cause them to tumble if you are working on asphalt, thus you will still need to place wood underneath them. They're actually less stable on soft asphalt than normal inexpensive jack stands because of the large, flat top. But they are much better with a wooden base.My Big Reds are great. But those jack stands are now my "guests." They are MY jack stands, these Escos.Don't forget to purchase them in pairs.
3.9/5
Material: Made of high quality rubber, it is very sturdy
Maximum Load: 3 ton
Application: Fit for Torin Big Red T43002 , but not fit for Torin T42002. Jack pad to guard against slipping when you lift the vehicle, and prevent your frame rails and pinch welds from bending.at the same time protect your car undercarriage and surface painted
Dimension: About 2.48" length by 1.97" height, and 1.73" width by 0.67" groove depth
Durable and Safety: Sturdy rubber material and slotted construction, provides more cushion and crush resistance, It is very safe and convenient when you need to repair the vehicle
$234
These are deep enough to precisely cradle the pinchweld and fit snugly on my old Craftsman jack stands.
3.8/5
Prevent your frame rail pinch welds from bending when using a jack to lift your car
Fits most vehicles and floor jacks, please ensure fitment by checking listed dimensions
2.5" Diameter, 1" Tall Slot Dimensions: 10mm Width, 7mm Height, does not fit Trolley Jacks
Adds extra grip when raising the car and reduce slipping
New polyurethane construction, still soft enough to prevent damage, yet hard enough to support the jack point
$234
These are composed of polyurethane, yet despite being stiff and slippery, they are much more smooth and plastic-like than rubber-like. They serve as a flexible "buffer" between the thin-walled frame tubes of my sensitive vehicle and the floor jack saddle. Due to bolt heads at the jack points, I had to somewhat enlarge the slots to accommodate the jack points of my lightweight race vehicle, however after modification, these seem to function properly. Compared to the softer rubber pads I had previously used, they are undoubtedly more "slippery," but as long as the jack saddle is absolutely parallel to the jack point surface, they function as intended. The only place I'd use them is on a smooth, flat garage floor, but if you were to replace a tire on an uneven road, that might be a difficulty. To ensure that they didn't move or escape, you would need to be extremely cautious.The slot is only 9 mm wide and 9 mm deep, therefore it won't fit many vehicles with "taller" flange welds even though it appears to be designed to be used on vehicles with flange-welds in their jack points. Additionally, these pads only have a 62 mm diameter, making them suitable for jacks and smaller cars. It's probably not a good idea to use them on a 4-1/4 inch jack saddle to lift a 5000 lb SUV.To minimize slipping and to allow for jacking when the jack saddle is not exactly parallel to the vehicle's jack points, I'm considering gluing on a thin (1/10th inch), high-density rubber layer to the bottom.
3.7/5
Save from costly repairs or having to replace damage OE adapter areas
Properly fit the slot when lifting your Audi up and prevent damage
Fits most late model Audis, please ensure fitment by checking listed dimensions, Does not fit many 2018+ Audis
Base Diameter: 2.75" Height: 0.5" Insert Height: 1", does not fit Trolley Jacks
New polyurethane construction, still soft enough to prevent damage, yet hard enough to support the jack point
$234
One was purchased for my 2013 C7 Audi A6. makes it quick and simple to lift the car. The adapter is so tightly pressed against the lift point that it may become trapped. I discovered this when it spent the weekend locked in the lifting point and traveled from Wilmington, North Carolina to Norfolk, Virginia, and returned. After getting home, I discovered it and was shocked that it hadn't fallen out. If it does get stuck, just keep in mind not to forget about it.But for the price, it's a fantastic product.
COPYRIGHT © 2019