There are many different types and styles of hydraulic quick connect fittings, but they are not all the same. The three most common types are JIC, SAE, and BSPP. Each type has its own advantages and disadvantages. JIC fittings are the most common type used in North America. They are easy to connect and disconnect, and they have a good seal. However, they are not compatible with all types of hydraulic hose. SAE fittings are less common, but they are compatible with more types of hose. They are also easier to disconnect than JIC fitt
No, JIC and SAE are not interchangeable. JIC (Joint Industrial Council) is a British standard while SAE (Society of Automotive Engineers) is an American standard.
No, brass fittings are not recommended for use in hydraulic applications. While brass is a softer metal, it is not as strong as steel and is not compatible with hydraulic fluids.
There are two types of tapered threads: parallel and tapered. NPT (National Pipe Taper) is a tapered thread, while JIC (Joint Industry Council) is a parallel thread. This means that NPT will not fit into a JIC fitting.
5/5
Outer Diameter : 64mm / 2.5"
Inner Hole Diameter : 48mm / 1.89"
Silicone gasket fit standard 2" tri-clover or tri-clamp fittings, apply to Pipe Outer Dia: 51mm / 2"
Made from food grade Silicone Rubber, FDA Approved, EPDM Synthetic Rubber
O-Ring/Gasket, 2 inch Tri-clover (Tri-clamp) Heater with highest Chemical Resistence
$234
The craftsmanship is flawless. Excellent results for my application.
5/5
Fits: 1.5" Tri Clamp / Clover / Sanitary Fitting
Barbed fitting for a tight seal on hoses when used with a hose clamp (not included)
For use with rubber hoses: Barb: 3/8" Barb For Rubber, Plastic, TPU, or other hose
Adapter for connecting pipes or fittings of different types
Connects to a hose on both ends
$234
The outside barb diameter was measured at 0.778, which made me extremely happy "which is in compliance. The fitting's finish was respectable, with only a few little nicks here and there.On eBay, I bought a ton of comparable fittings with 0.740-inch-diameter barbs "so that it is impossible to get the tubing and fitting to seal at typical water pressure of 70 psi when 3/4 food grade PVC tubing is fastened using double hose clamps or double band-it clamps.
4.9/5
High Quality Carbon Steel JIC 37? Flare Cap & Plug Fittings Kit
Package Quantity: 64-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box
$234
A fantastic product has been offered by Hydraulic's Hub. The threads are straight and the flares are equal, and the caps and plugs are quite durable.Unfortunately, it appears that the box was dropped or improperly secured during shipping, leaving the individual pieces scattered. Because they will be utilized in a field situation, I don't mind if they get a few dings or scrapes, however it seems like some of the pieces weren't recovered when they were dropped.I still give this product five stars; great work, Hydraulics Hub, and thanks to Amazon for quickly resolving the problem.
4.6/5
BUILT TO LAST: Constructed from high-strength zinc-plated steel for extra strength and rust-resistance
SAVE TIME: The ABN Hydraulic Grease Fitting SAE Standard 110-Piece Kit – Straight, 90-Degree, 45-Degree Angled Zerk Assortment Set allows you to simply insert lubricant directly into the bearing without having to disassemble or replace the bearing; For restoration and replacing missing or broken grease zerks on your machinery
CONTENTS: Package includes (110) SAE zerk grease fittings and (1) carrying case
EASY STORAGE: 8.2†x 1.2†x 4.2†inch (20.8cm x 3cm x 10.7cm) plastic carrying case for easy transport, safe storage, and quick organization; Sizing chart is included for simple identification
SIZES: Includes commonly used zerk/grease SAE fittings (30pc) 1/4"-28 straight 180-degrees, (15pc) 1/4"-28 45-degrees, (15pc) 1/4"-28 90-degrees, (15pc) 1/8"-27 90-degrees, (15pc) 1/8"-27 45-degrees, (20pc) 1/8"-27 straight 180-degrees
$234
A Ford tractor had a zerk that would not accept grease. I used an 8 mm socket wrench to remove it. The old grease was stiff inside the bearing, so I used a finishing nail to scrape away what I could. After installing the new zerk, the grease simply pushed out the remaining old, filthy grease. Fortunately, this fitting was straight; nevertheless, I've added the fitting tool to my cart so that I may take out the 45 and 90 degree zerks. Examine your order after you receive it as well. My collection lacked the 90s and included two 45s. It was soon superseded by Amazon.
4.6/5
BUILT TO LAST: Constructed from high-strength zinc-plated steel for extra strength and rust-resistance
SAVE TIME: The ABN Hydraulic Grease Fitting SAE Standard 110-Piece Kit – Straight, 90-Degree, 45-Degree Angled Zerk Assortment Set allows you to simply insert lubricant directly into the bearing without having to disassemble or replace the bearing; For restoration and replacing missing or broken grease zerks on your machinery
CONTENTS: Package includes (110) SAE zerk grease fittings and (1) carrying case
EASY STORAGE: 8.2†x 1.2†x 4.2†inch (20.8cm x 3cm x 10.7cm) plastic carrying case for easy transport, safe storage, and quick organization; Sizing chart is included for simple identification
SIZES: Includes commonly used zerk/grease SAE fittings (30pc) 1/4"-28 straight 180-degrees, (15pc) 1/4"-28 45-degrees, (15pc) 1/4"-28 90-degrees, (15pc) 1/8"-27 90-degrees, (15pc) 1/8"-27 45-degrees, (20pc) 1/8"-27 straight 180-degrees
$234
A fantastic product has been offered by Hydraulic's Hub. The threads are straight and the flares are equal, and the caps and plugs are quite durable.Unfortunately, it appears that the box was dropped or improperly secured during shipping, leaving the individual pieces scattered. Because they will be utilized in a field situation, I don't mind if they get a few dings or scrapes, however it seems like some of the pieces weren't recovered when they were dropped.I still give this product five stars; great work, Hydraulics Hub, and thanks to Amazon for quickly resolving the problem.
4.5/5
Durable construction provides years of reliable use
Includes: 10 couplings, 10 plugs, 5 tees, and 5 elbows
For use with 1/4-inch distribution or soaker tubing
Includes an assortment of the most commonly used 1/4-inch drip fittings
For outdoor use with cold water only
$234
What a useful set. Every time I need an irrigation part, I have to purchase a package of anything between 10 and 50 pieces from my neighborhood large box home improvement store. Although it's a beautiful way to package the items if you're installing a new irrigation system, I'll never need that much to maintain my current system or occasionally plant anything new.This kit has 30 of the most typical parts, which will prevent me from making several journeys to the store in the near future.
4.3/5
Fit for all other homebrew stuff sanitary fittings
Preventing rust processes and for the whole body
Easy tighten thumb screw
Made of stainless steel 304,Higher corrosion resistance than the 302 grade stainless steel
Tube OD: 2 Inch, Flange Size: 64MM, Fits 2 Inch Tri-clamp
$234
—————- UPDATE ———————The level of customer service was excellent. They sent me the third clamp size, which was the right size, after I tried the first two. In essence, you shouldn't believe the "Pipe OD" measurements. Measure your pipe's flange (or "ferrule," as they like to say), then compare it to the given dimensions.Once you find the proper size, a good clamp:-)—————A FIRST REVIEW——————-The measurements are drastically incorrect, but the quality appears acceptable. The *pipe* in question, according to the post, had an OD of 1.5 ", but when I got it, it was far too tiny. My pipe's OD was 1.5, but the flange I was trying to connect it to was roughly 2.5". By measuring the clap, it appears that a 1-1.5 would fit "flange.Therefore, I'm returning it and buying a larger size because it appears that where they say "pipe," they mean "flange."
4.1/5
100 Percent pressure hydraulic tested for reliability
Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp
Tri-Clamp butterfly valve Max Pressure 1.6MPA
The pull style handle allows you to set the valve in four different positions simply by pulling and turning
Temperature Rating (spec): 15°F thru 200°F; Material (spec): 304 Stainless Steel
$234
It works nicely if you are purchasing this as a component of a brewery setup, like I did. I have a number of them, and one of them is right next to the burner on the little system, so I've never had a problem with it not opening, not sealing, or the valve lever getting too hot. I'd heartily suggest this ball valve because it's pretty much perfect.
To know if your hydraulic fittings are JIC, you need to look for the JIC symbol. This is a small triangle with an arrow inside of it. If you see this symbol, then your fittings are JIC.
There are a few ways to tell what type of hydraulic fittings you have. One way is to look at the end of the fitting. If it is flared, it is a 37° fitting. If it is not flared, it is a 45° fitting. Another way to tell is by the size of the fitting. The most common sizes are 1/4", 3/8", and 1/2".
An "fitting" is a small, detachable accessory that is used to connect two pieces of plumbing together. There are many different types and sizes of fittings, and they are made from a variety of materials, including plastic, metal, and rubber. Fittings are typically used to connect pipes, hoses, and other types of tubing together. In order to ensure a proper connection, it is important to select the right fitting for the job. Otherwise, the connection may leak or come apart.
JIC 37 is the most common size for hydraulic fittings. It is also the size for SAE O-ring boss (ORB) fittings. JIC 45 is less common, but it is still used in some applications.
JIC 37 and AN are both types of flare fittings used in hydraulic systems. JIC 37 is a 37-degree flare, while AN is a 45-degree flare. While both types of fittings are similar in function, they are not interchangeable. JIC 37 fittings will not work with AN fittings, and vice versa.
No, UNF and JIC are not the same. UNF is the Unified National Fine thread, while JIC is the Japanese Industrial Standard. JIC is metric, while UNF is imperial. JIC is also known as 7/16-20 UNF.
COPYRIGHT © 2019