Best Grommet Kits in 2022

Last update: December 27, 2022

Are there different types of grommets?

There are two types of grommets: metal and rubber. Metal grommets are most often used in industrial applications because they are more durable and can withstand more wear and tear. Rubber grommets are typically used in household applications because they are less expensive and easier to install.

Can I use eyelet pliers on grommets?

Grommets are small metal or plastic rings that are used to reinforce holes in fabric. They can be found in a variety of sizes and thicknesses, and are commonly used in garments, bags, and other items where a strong, durable hole is needed. Eyelet pliers are a specialized tool that is used to install grommets. They have a long, thin nose that is inserted through the hole in the fabric, and a set of jaws that grip the grommet and pull it through the hole. Eyelet pliers are the best tool for installing

Do you need a special tool for grommets?

Grommets are metal or plastic rings that are inserted into fabric to reinforce eyelets. They can be used on a variety of materials, including canvas, tarpaulin, and awnings. Grommets are usually inserted using a special tool, although some can be installed by hand.

How big is a standard grommet hole?

A grommet is a small metal or plastic ring that is used to reinforce a hole in fabric. The hole is usually made by a sharp object, such as a pencil, and the grommet prevents the hole from fraying or tearing. Standard grommet holes are usually about 1/4 inch in diameter, but the size can vary depending on the type of grommet and the application.


Ram-Pro 125 Piece Rubber Grommet Eyelet Ring Gasket Assortment, Set of 18 different sizes, with See-through Divided Organizer Case – Ideal for Automotive, Plumbing, and PC hardware/Piano repair etc. Review:


Very helpful for automobile modifications and other tasks requiring the running of wire or cable through metal or plastic holes. The box comes in a variety of sizes, some without an entrance to seal a hole that is no longer needed or to create a custom-sized center hole if necessary. Some grommets are designed for thicker materials like plastic trim, while others are meant for thinner materials like thin (auto) metal. Grommets will stop wire and cable from rubbing against plastic or metal. I utilized this specifically to pass a backup camera video wire and wiring through a hole in my car's trunk lid.



InstallGear 180pc Rubber Grommet Assortment Kit - 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 7/8", 1" Review:


There isn't much to say about these other the fact that they function as intended and come in a good range of sizes. These are being used by me to shield cables that connect to an Arduino project case. The final models use metal, whereas the prototypes are made of plastic. These are effective at lessening wire abrasion against the case but won't work for watertight applications without additional filler.Installation is not that difficult. If there is too much play, I use a reamer to clean out the drill hole and (sometimes) a little hot glue. Smaller sizes can be a little difficult. There is a trade-off between simplicity of installation and snug fit after installation, but I usually choose simplicity of installation.Other than that, it fulfills my expectations and is a rather commonplace item.



Cal-Hawk AZGA125 Rubber Grommet Assortment Set Electrical Gasket, 125 Piece, White Review:


Just to be clear, these are soft, malleable rubber, not plastic or a rigid rubber, as several have already stated. Many of these sets are sold on Amazon, however customers have complained about the material's quality, including that it is rigid, subpar, and poorly molded and not rubber. As I have not ordered any of those sets, I am unable to confirm or deny these allegations. Because they were described as being made of soft rubber in the reviews, I decided to get this set. They are well-molded, completely round, highly malleable, and simple to place into a hole, as I can attest to. The majority of the flange grooves on the exterior are designed to accommodate thin sheet metal. A few, but hardly more than a few, are sized to fit a thicker mounting surface. A thin rubber membrane covers the center hole in the seven sizes designated as "RBG" in the description. Simply puncture a hole in the rubber with something like an icepick, put the wire through, and the grommet will seal firmly against the hole. This is perfect for situations where the wire is considerably smaller than the accessible hole. A great kit that is reasonably priced.



HYCC 2" Flexible Desk Grommet -New- Color: Black - 5 Pack Review:


I decided to try these since I needed some 2 inch grommets for a control board project I'm working on.With my two, I've used other brands "I had to use black tape or super glue to prevent them from falling out of the hole saw because they were usually a little loose. These did not cause me any issues. I applied the same two "These fit into the hole saw extremely tightly—almost too tightly—and I had to press them in firmly to seat them all the way. Having them overly tight is preferable to them slipping out.In comparison to the other items I bought, the price was reasonable at $1.50 apiece. I should have gotten the 10-pack as it's much less expensive.They effectively secure the wires in place and give my project a polished appearance.



Cordaway 2" Desk Grommet, Adjustable Cord Cover, Cable Hole Wire Management, Three Different Sized Opening, Made In USA, Black Plastic (00201) Review:


For a 1.5" maple desk I had made specifically, I required a grommet to pass cables beneath it invisibly and neatly. This has been functioning wonderfully and was precisely what I needed. It's an excellent offer at $5, including shipping.Desk depth is 3/4"; Surface Diameter is 2 13/16"; Hole Saw Size is 2 3/8"; Cable Opening is 1 3/4"; Material is hard plastic; thickness is 1/16"This is manufactured by a firm called "Master Caster," which also distributes a wide range of other office supplies via numerous other shops. In addition to black, this grommet is available in 9 other hues to match any desk color. I chose that color despite the surface being beige because the majority of my wiring are black. I bought from "ElectriDuct," an Amazon vendor. They sell all of the colors on their own website and a few via Amazon.You must drill a 2 3/8-inch hole. If they have a good selection, some home improvement stores may have it, but I found a Vulcan Bi Metal Hole Saw on Amazon for just $11 (based on the recommendation of another reviewer), and it fit perfectly and snugly. To prevent the grommet from pulling out of the hole when wires are put through it, the hole should ideally be as close to the grommet size as possible. Instead of some cheap designs that don't work well, they cleverly incorporated tiny plastic ribs onto the sides to create some additional friction. Naturally, this makes it more challenging to remove the entire grommet for maintenance, but you shouldn't be doing that frequently.You get roughly 3/16" around the hole on all sides since the top surface has a broader lip to prevent it from dropping through the desk, which is 2 13/16" in diameter. That is also helpful if the hole saw cut is not as precise as you had intended.The grommet's interior top is constructed of an extremely flexible rubber material that mostly covers the surface to give it a neat appearance and has eight separate apertures that resemble pie slices. While still allowing wires to pass through smoothly, they "give" just enough to remain in place. Other grommets have openings that are permanent or need to be spun, slid, or pulled open. But I prefer this one because you can use the entire hole opening if necessary for numerous cables or a thick connector end, and it still fills in the majority of the hole when you have less wires. The largest diameter of wires that can be fed down it is 1 3/4". Even though I'm only utilizing half of the opening, I have no problems running 8 USB, DVI, and power cords through it. Nevertheless, you will always need a little extra for the connecting ends.The 3/4" depth should be adequate for most thinner wood desks. The maple plywood top I was using in my circumstance was 1.5" thick, therefore an additional 3/4" of depth is not covered by the grommet. There shouldn't be a problem if you finely sand the hole, as I did. The area on the surface edge where the wire turns after exiting the hole is where you need to be most concerned.



MEZOOM Grommet Kit 200 Set 1/4 Inch Inside Diameter Grommet Setting Tool Metal Eyelets with Storage Box for Shoe Clothes Leather Crafts,DIY Projects Review:


I purchased these grommets so that I could hang my used, damp kitchen rags to dry and store them out of the way. This works perfectly, but we'll have to wait and see how well they stand up to washings. They should have included printed instructions, but since they don't, you'll have to look to the seller's product photographs for guidance. Given that these are small bits, the plastic case is a wonderful addition that keeps everything, including the tools, neatly arranged. Make careful to work on a firm surface that can withstand the stress before using the cutting tool to create flawless holes. To prevent the tool from striking the surface on impact, I like to insert a magazine underneath. You may need to practice and maybe sacrifice some material, or you may be able to strike it a few times with moderate force and check it until it is to your taste. The level of power necessary depends on the material. For the appropriate look, I discovered that you need to hit much harder than you might think. Overall, I would recommend this product because it is ideal for my use.



General Tools 81264 Multi Grommet Tool Kit, 3/8" and 1/2" Rustproof, Solid Brass Grommets Review:


Since I don't install grommets frequently, it was simply not feasible to justify investing hundreds of dollars on a production press. This kit was ideal for those of us who had lesser jobs to do! Everything you require to finish the job is there. Possibly the most crucial component of the kit, the anvil piece is really well constructed. I'd rate it five stars. The block of wood is simply a piece of oak. I'd give the cutter four stars because it functions reasonably well. I'd probably give the grommets three stars because I'd say they're not the best. But once more, the anvil is the most crucial component, and this package provides a top-notch anvil that can pound thousands of grommets. The cutter didn't cut as well because I was using it to cut some nylon webbing. It probably works much better on cotton or leather. In any case, it was functional; it just wasn't fantastic. The grommets weigh only a small amount. I've undoubtedly used heaver grommets in the past. However, they are free, come with the kit, are in good working order, and appear to hold tightly. I'm not sure how they'll hold up over time, but I guess I'll have to wait and see. Therefore, you will probably need to purchase those separately if you want extremely excellent, top-notch grommets. I give this kit a total of five stars since it makes a great anvil and is extremely reasonable.



General Tools 71264 Grommet Kit with 12 Solid Brass Grommets, 1/2-Inch Review:


Since I don't install grommets frequently, it was simply not feasible to justify investing hundreds of dollars on a production press. This kit was ideal for those of us who had lesser jobs to do! Everything you require to finish the job is there. Possibly the most crucial component of the kit, the anvil piece is really well constructed. I'd rate it five stars. The block of wood is simply a piece of oak. I'd give the cutter four stars because it functions reasonably well. I'd probably give the grommets three stars because I'd say they're not the best. But once more, the anvil is the most crucial component, and this package provides a top-notch anvil that can pound thousands of grommets. The cutter didn't cut as well because I was using it to cut some nylon webbing. It probably works much better on cotton or leather. In any case, it was functional; it just wasn't fantastic. The grommets weigh only a small amount. I've undoubtedly used heaver grommets in the past. However, they are free, come with the kit, are in good working order, and appear to hold tightly. I'm not sure how they'll hold up over time, but I guess I'll have to wait and see. Therefore, you will probably need to purchase those separately if you want extremely excellent, top-notch grommets. I give this kit a total of five stars since it makes a great anvil and is extremely reasonable.



General Tools 1261-2 Rustproof Solid Brass, 3/8-Inch 3/8" Grommet Refill, 24 Sets Review:


Since I don't install grommets frequently, it was simply not feasible to justify investing hundreds of dollars on a production press. This kit was ideal for those of us who had lesser jobs to do! Everything you require to finish the job is there. Possibly the most crucial component of the kit, the anvil piece is really well constructed. I'd rate it five stars. The block of wood is simply a piece of oak. I'd give the cutter four stars because it functions reasonably well. I'd probably give the grommets three stars because I'd say they're not the best. But once more, the anvil is the most crucial component, and this package provides a top-notch anvil that can pound thousands of grommets. The cutter didn't cut as well because I was using it to cut some nylon webbing. It probably works much better on cotton or leather. In any case, it was functional; it just wasn't fantastic. The grommets weigh only a small amount. I've undoubtedly used heaver grommets in the past. However, they are free, come with the kit, are in good working order, and appear to hold tightly. I'm not sure how they'll hold up over time, but I guess I'll have to wait and see. Therefore, you will probably need to purchase those separately if you want extremely excellent, top-notch grommets. I give this kit a total of five stars since it makes a great anvil and is extremely reasonable.



General Tools 1261-4 1/2-Inch Grommet Refill, 24 Sets Review:


Since I don't install grommets frequently, it was simply not feasible to justify investing hundreds of dollars on a production press. This kit was ideal for those of us who had lesser jobs to do! Everything you require to finish the job is there. Possibly the most crucial component of the kit, the anvil piece is really well constructed. I'd rate it five stars. The block of wood is simply a piece of oak. I'd give the cutter four stars because it functions reasonably well. I'd probably give the grommets three stars because I'd say they're not the best. But once more, the anvil is the most crucial component, and this package provides a top-notch anvil that can pound thousands of grommets. The cutter didn't cut as well because I was using it to cut some nylon webbing. It probably works much better on cotton or leather. In any case, it was functional; it just wasn't fantastic. The grommets weigh only a small amount. I've undoubtedly used heaver grommets in the past. However, they are free, come with the kit, are in good working order, and appear to hold tightly. I'm not sure how they'll hold up over time, but I guess I'll have to wait and see. Therefore, you will probably need to purchase those separately if you want extremely excellent, top-notch grommets. I give this kit a total of five stars since it makes a great anvil and is extremely reasonable.


How do you know what size grommets to buy?

There's no need to be anxious about what size grommets to buy. You can easily find the right size by using a grommet hole size chart. This helpful tool will ensure that you purchase the proper grommets for your project.

How do you reinforce fabric for grommets?

Reinforcing fabric for grommets is a simple process. First, cut a square or rectangle of fabric that is slightly larger than the area where the grommets will be placed. Next, lay the fabric wrong side up and position the grommets on top. Once the grommets are in place, use a hammer or other blunt object to gently tap them into the fabric. Finally, trim the excess fabric from around the grommets.

How far from the edge should grommets be?

Grommets are usually placed about an inch from the edge of the fabric, but this may vary depending on the thickness of the fabric.

How thick of material can you grommet?

What can I use in place of a grommet?

I can use a paperclip in place of a grommet. I can also use a pencil sharpener.

What happens if a grommet doesn't fall out?

If a grommet doesn't fall out, it may become infected. If the grommet becomes infected, you may need to have it removed.