Best Gas Tank Doors in 2022

Last update: December 3, 2022

Are all gas caps the same?

The answer is no, all gas caps are not the same. While they all may look similar, there can be subtle differences in the way they function. For example, some gas caps are vented while others are not. Vented gas caps allow air to enter the fuel system as the fuel is used, while non-vented gas caps do not. This can cause pressure to build up in the fuel system, which can lead to fuel leaks.

Can you drive without the gas cap?

No, you cannot drive without the gas cap. The gas cap is important because it helps to keep the gas in the tank from evaporating.

Can you replace a fuel door?

If your fuel door is damaged, you may be able to replace it yourself. However, if the damage is severe, you may need to replace the entire fuel system.

How do you replace a gas cover?

If your car has a gas cover that needs to be replaced, you can follow these steps. First, you'll need to find a replacement gas cover that fits your car. Then, you'll need to remove the old gas cover by unscrewing it or popping it off. Once the old gas cover is off, you can put the new gas cover in its place. To do this, you may need to screw it in or snap it into place. Finally, you can close the gas cover and make sure it's secure.


fits 2009-2014 Ford F-150 Fuel Filler Door Gas Tank Lid w/Hinge (9L3Z-9927936-B) Review:


It just took me ten minutes to replace the fuel door; granted, it was tight, but that's good, right? I'm hoping it holds up better than the original Ford product. If you have any questions concerning the installation, see the YouTube video. Additionally, the thing arrived the day after I ordered it. I am thus far quite pleased with the business and the product.



Genuine GM 20912532 Fuel Tank Door Spring Review:


Snapping in couldn't have been more simpler! I kept putting it off because I was told (by the dealership) that it was very difficult to get this piece in, yada yada yada. I ordered the item as soon as I found it on Amazon and after reading all the reviews about how simple it was to install. I snapped it into place shortly after I opened the package. No more using a card to lift the lid of my gas tank! LOL, take that dealership.07' Tahoe



Jeep Fuel Door (Black) - 82215123 Review:


It is a well-made item. despite how beautiful the product was. I had to return it because I already had a gas cover that I had bought earlier for a cheaper price. The gas cover I had previously bought was a little loose and wouldn't fit tightly on my Jeep, therefore that was the sole reason I had purchased this item. Because of this, I hesitated to discard the previous gas cap I had bought before realizing it was too big for my Jeep. I therefore tried to fix it again, and after making a few adjustments to the gas cover, I was successful. So don't wait to buy this gas cover if you like it.



JeCar Fuel Door Cover Locking Gas Cap Cover for 2007-2018 Jeep Wrangler JK & Unlimited Review:


It took me approximately 3 days from the date of the order to get this in, which was about a week ago. However, I had to wait till a beautiful day to install! It took around 15 minutes in total, much of which was spent looking for my screwdriver and reading the directions. The only equipment you'll require is a screwdriver and perhaps a flathead. I've included images of the installation taken before, during, and after.The gas tank screw on, which easily pops off the old tank and onto the new one, must be saved. Then, in order to reach the tabs that you must release from the old fuel cap and to properly install the new rubber ring around the fuel cap, you must remove the tail light. You can detach it and move it out of the way, but I just set my tail light aside. You should search for the tabs to press in with a flat head screw driver and I've included a picture of what it looks like inside behind the tail light. I had to sort of tug and push until I was able to remove the previous cap because I could only reach two of the four tabs (two on the opposite side). The hardest aspect of the installation was probably that. The gasoline cover from the component that needs to be placed back into the opening is removed by unscrewing four of the six screws. Once that is finished, you may insert the new rubber ring into the gasoline cap hole. Make sure the rubber ring is snugly wrapped around the gas tank opening. The aluminum cover needs to be screwed back onto the fuel cap as the final step.The installation instructions that are supplied in the package make it quite simple to complete. Overall, I think Sunny D looks great with her new fuel tank cap, and if you're looking for a quick modification that will give your Jeep a fresh look, I highly recommend obtaining this!



JeCar Aluminum Gas Cap Fuel Filler Door Cover for Jeep Wrangler 2007-2018 JK & Unlimited Accessories (Black) Review:


It took me approximately 3 days from the date of the order to get this in, which was about a week ago. However, I had to wait till a beautiful day to install! It took around 15 minutes in total, much of which was spent looking for my screwdriver and reading the directions. The only equipment you'll require is a screwdriver and perhaps a flathead. I've included images of the installation taken before, during, and after.The gas tank screw on, which easily pops off the old tank and onto the new one, must be saved. Then, in order to reach the tabs that you must release from the old fuel cap and to properly install the new rubber ring around the fuel cap, you must remove the tail light. You can detach it and move it out of the way, but I just set my tail light aside. You should search for the tabs to press in with a flat head screw driver and I've included a picture of what it looks like inside behind the tail light. I had to sort of tug and push until I was able to remove the previous cap because I could only reach two of the four tabs (two on the opposite side). The hardest aspect of the installation was probably that. The gasoline cover from the component that needs to be placed back into the opening is removed by unscrewing four of the six screws. Once that is finished, you may insert the new rubber ring into the gasoline cap hole. Make sure the rubber ring is snugly wrapped around the gas tank opening. The aluminum cover needs to be screwed back onto the fuel cap as the final step.The installation instructions that are supplied in the package make it quite simple to complete. Overall, I think Sunny D looks great with her new fuel tank cap, and if you're looking for a quick modification that will give your Jeep a fresh look, I highly recommend obtaining this!



Dorman 47208 Lexus/Toyota Fuel Door Spring Review:


Exactly right for my 2004 Lexus RX330.The gasoline door could open before I ever placed this order, but only just enough for the actuator to avoid snagging the door's actuator hole. I didn't even notice that the hinge spring was missing because I was incorrectly under the impression that the fuel door hinge needed additional silicone to allow for broader opening. I applied silicone to the door hinge. When I tried it out, the door would no longer swing open at all. After doing some research and realizing that the hinge spring was needed, I ordered it, had it installed the next day, and BAM! the door swings open widely. Additionally, the door hinge now freely swings like a harlot at a no jockstrap convention because I sprayed the crap out of it. But whatever.



RT-TCZ Fuel Filler Door Gas Tank Cap Cover Accessories for 2007-2017 Jeep Wrangler JK & Unlimited Sport Rubicon Sahara (US Flag) Review:


It looks good and is finished well. 9:00 The plastic position alignment nub does not fit correctly into the body sheet metal hole. broke off in order to fit. Simple instructions are provided; in this case, YouTube is your friend. Despite being forced, it still rotates somewhat. As long as no one messes with it, it seems snug enough to keep position. Only time will tell. Remove the tail light before installation (no need to unplug light, just let it hang). Activate the two retention clamps keeping the OEM gas cap assembly in place (can use finger or flathead screwdriver). I've discovered that it's simpler to remove the OEM rubber seal if you press from the back. Remove the OEM assembly's gas cap and tether. Before installing, attach a fresh rubber seal to the replacement assembly. Put the assembly in the proper position on the gas tank spout (may need flathead screwdriver to aid in getting seal around spout). Push the retainer clips in until they all lock into place.



Gas Cap Cover Fuel Tank Cap Cover for 2007-2018 Jeep Wrangler JK JKU Sport Rubicon Sahara Unlimited (A2) Review:


After seeing the 5-minute YouTube video on how to install a Mopar Jeep Fuel Filler Door, I was able to complete the installation in less than 15 minutes despite my inability to understand their wordless, badly diagrammed directions. It demonstrates how to take out the left taillight assembly and pop the old plastic component out using two plastic tabs. The man in the video I saw claimed that switching out the new rubber gasket and removing the old one was the hardest part. While off the Jeep, I installed the new rubber gasket in the hole on the new cover with my hands. I then gently worked the gasket around and over the filler neck with a screwdriver until it was past the filler neck rim. Finally, I pushed the filler neck from behind and the new cover into place. This was easier for me than it was for him. Before installing the new cover and tightening the 4mm hex screws, it is also helpful to loosen the cover's 4mm hex screws (be careful not to lose two nuts, one behind each of the top and bottom screws), and make sure the tiny spike behind the cover is pushed through the body hole to the left of the filler neck. By the way, the Omix ADA 17726.17 locking gas cap, which is now available on Amazon, fits nicely under this cover if you want to add one. Stant 10504, which is less priced, might also work, but the Omix had slightly higher ratings overall and performs well.



Gas Tank Cap for Jeep Wrangler 07-17 Sport Rubicon Sahara Fuel Filler Door Cover Review:


Make sure to adhere to the guidelines. This gasoline door only has two pressable tabs, as opposed to the OEM fuel door's four. Additionally, it contains two tiny plastic pieces that are intended to fit into a hole in the fender, but I only needed one so I cut the other one off. Prior to installation, make sure the fuel door is removed. You should also install the bottom slots (without tabs) first. You run the danger of damaging the fender if you don't. Take care not to damage the tiny plastic peg they use to attach the fender. If you do, a tiny set screw will be required to secure it to the fender.



Fuel Filler Neck Housing Gas Door For 04-08 Ford F150 F-150 Replacement Part OEM 4L3Z-9927936-BA Tank Hinge Pocket Assembly Doors Spring Cap Lid Cover - Replaces 4L3Z9927936BA Review:


This will get me by in a world when plastic has replaced mechanics. No complaints, somewhat superior to the original segment, but, well, aaaaaand.perhaps you should also get the fuel door. Again, it is constructed of plastic, therefore removing it to reuse it with fresh housing is likely to result in a break.


How much does it cost to fix a gas tank door?

It can cost anywhere from $100 to $400 to fix a gas tank door, depending on the severity of the damage and the make and model of the car.

How much does it cost to replace the fuel door actuator?

The fuel door actuator is a small motor that is responsible for opening and closing the fuel door. When this part fails, it will need to be replaced. The cost of the replacement will vary depending on the make and model of your vehicle. However, you can expect to pay between $50 and $200 for the replacement.

What can I use as a temporary gas cap?

A can of soda can work as a temporary gas cap. Just be sure to clean out the can before using it.

What is a fuel actuator?

A fuel actuator is a device that controls the flow of fuel to the engine. It is usually located between the fuel tank and the engine and is operated by a lever or knob on the dash. The actuator regulates the amount of fuel that is delivered to the engine based on the amount of throttle that is being applied.

What is a fuel flap?

A fuel flap is a door or cover on an aircraft or spacecraft that provides access to the fuel tank. The fuel flap is usually located on the underside of the aircraft or spacecraft.

What is the gas tank door called?

The gas tank door is called the fuel door. It is usually located on the side of the car near the back.