Best Gas Cans in 2022

Last update: January 3, 2023

Are metal or plastic gas cans better?

There is no definitive answer to this question as it depends on personal preference. Some people prefer metal gas cans because they are more durable and do not break as easily as plastic. Others prefer plastic gas cans because they are lighter and less likely to rust. Ultimately, it is up to the individual to decide which type of gas can is best for them.

Are old gas cans illegal?

As of January 1, 2009, the Consumer Product Safety Commission (CPSC) banned the sale of portable gasoline containers that do not meet new spill-proof performance standards. The new regulations were prompted by the large number of deaths and injuries caused by gasoline fires and explosions.

Does OSHA allow plastic gas cans?

Yes, OSHA does allow plastic gas cans. This is due to the fact that they are less likely to break and leak than their metal counterparts.

How do I choose a gas can?

When it comes to choosing a gas can, there are a few things you'll want to keep in mind. First, consider the capacity of the can. How much gas do you need to store? Second, think about the material the can is made from. Some gas cans are made from plastic, while others are made from metal. Each has its own advantages and disadvantages. Third, consider the type of spout or nozzle that comes with the can. Make sure it's compatible with your gas tank and easy to use. Finally, take price into consideration. Gas cans range in price from


20 YELLOW Fuel Gas Can Jug Vents/Cap Replacement Wedco Rotopax Gott Septer Anchor Blitz Review:


These are wonderful things. I put these in each of my gas cans.As instructed, I drilled 31/64" holes, which resulted in a closer fit than 1/2" For a clean hole, I used a drill bit that was quite pointed. You might not think this is as simple as you think because drilling can easily cause the plastic gas can to bend. In order to reduce the likelihood that the seam may split, I positioned the hole off the seam by about an inch.It is a very tight fit to press the vent through the hole, so I used a flat closed-end wrench of the appropriate size to hold the vent perpendicular to the gas can surface while pressing. I would therefore begin inserting the vent with the cap still on it with my bare hand. I would then lay a wrench on top of it and press firmly once it was partially in. The vent was kept tight and simpler to press in by preventing it from becoming skewed or slanted by holding the wrench parallel to the surface of the gas container.After doing all of this, I believe that these vents are very secure.



GARAGE BOSS GB320 Briggs and Stratton Press 'N Pour Gas Can, 2+ Gallon, Red Review:


It was necessary to twist, slide, and pour my final two gas cans. Although the Garage Boss with a push-button release is an upgrade, it still needs work. It can be difficult to hold the weight of the can with one hand while pushing the seal button and keeping the spout where it should be, which is just within the neck of the tank to allow visibility of the gasoline level. First the handle and the button are in line. Second, because there is no vent, a large pour cannot be made without "burping." Making sure that there is room for air to enter the spout as the gas is poured does work, but it does extend the filling time. This is not a significant deal, but it is still a gig on the system. Last but not least, the straight spout is a definite drawback if you intend to use this on a tiny machine (such as a mower or blower). The only choice is to rest the end of the spout on the edge of the fuel tank fill port in order to see the level of fuel in the tank so as to avoid overfilling. Maybe it's just me, but I've already had a few instances of the spout slipping off the tank's lip and spilling gas all over the lawnmower. A spout with a curve would be a nice addition. The fact that I am an octogenarian in good physical shape should be taken into account in all of the foregoing, although sluggish reflexes and declining strength could also play a role. Anyway, that's my opinion, two cents.



Kool Products Retail Pack Flexible Replacement Gas Spout with 2 Screw Collar Caps(1 Fine & 1 Coarse - Fits Most of The Cans), 2 Base Caps, 1 Stopper Cap and 1 Stainless Steel Filter/Flame Arrestor. Review:


For at least five years, I have been hunting for a gas can with an easy-to-use spout. The new EPA-compliant cans have difficult-to-use spouts that pour slowly and spew gas all over the place. They are impossible to operate due to the springs, buttons, and other cunning levers!These worked perfectly on both pre-EPA and post-EPA-influence cans when I bought three of them to test them out. I'm going to place an order for three more so that all of my cans have the pour spouts.You are given two types of hats (one fine thread and one coarse thread). One of the supplied caps fit one of my post-EPA cans, but not the other. But I was able to utilize the original can's cover with the new nozzle, and it worked flawlessly with no leaks.One thing to keep in mind: If you have post-EPA cans without a separate vent, you might wish to buy "gas can vent kits" from Amazon. They are really simple to install and will speed up and simplify pouring.



GARAGE BOSS GB310 Briggs and Stratton Press 'N Pour Gas Can, 1+ Gallon, Red Review:


I purchased this to replace an outdated chainsaw cam. The nozzle operates flawlessly. Others have reported having trouble depressing the dispensing button after releasing the safety. Once I read the instructions that were literally just below the button, I had no trouble with it. It will easily push down if you push the button's side to release the safety catch first, then roll your thumb from top to bottom. No issue.



EZ-POUR Rigid Replacement Spout & Vent Kit for Water Jugs and Pre-2009 Gas Cans Review:


I recently purchased a fantastic little diesel-powered Bobcat tractor. I also purchased three 5-gallon yellow gas cans to use as fuel storage. The gasoline inlet on this tractor is practically shoulder level for me at age 68. Imagine my shock when I learned that it takes me twenty times longer to empty my bladder than it does for one of these shoddy EPA-mandated spouts to empty a five-gallon can. It took me ten minutes or more to hold the leaking thing up after I managed to line the complicated slots and sufficiently compress the challenging mechanism. This was unmistakably the work of some bureaucratic idiots with no common sense. But allow me to express my true sentiments.Leakage remained a problem, so I quickly devised a system of bungee cords to hold the can there while I went off to read War and Peace.I am kicking myself for taking so long to order these fuel spouts since I was finally fed up. I can now fuel my tractor the way God intended thanks to the spout's included air vent, which is simply inserted in the back of the can (drill the hole with a 1/2" speed bore, not a drill bit). What used to take many minutes now only takes a few, and there is no leakage. Get yours before they become illegal or before getting one requires you to submit to an FBI background check!



EZ-POUR Replacement Spout - Water Jug Or Gas Can Spout - Update Your Old Can Review:


Yay! I can once more utilize my gas can!It's been a long time since I purchased a gas can. Unknowingly, I threw away one of the "excellent" old-style cars that had been sitting outdoors and contained some five-year-old gas. Simply put, I believed that purchasing a new one would be simpler than cleaning the old one.I was surprised to see that there were no standard gas cans around. Just these recent, pricey EPA requirements. So I purchase one, reasoning that it cannot be that horrible. Well, because you're reading this, you already know the outcome. Every time I tried to use this new device, I ended up spilling more than my previous one would have in ten years.This new spout with vent functions exactly like the previous model. Pour by opening the vent. No gas spills, hassle with a hard fill spout that "latches," pushing buttons, or flipping latches.Installing was easy. This was made further simpler by the fact that my gas can was empty (I never liked to fill it owing to the mess it produced). I removed the old spout and made sure the two provided collars matched my can (was the yellow one). I next took out my step drill bit and drilled the can at its highest position with the proper size hole (1/2). The major problem is that my gas can's design forces me to install it a little higher than I would have liked in order to get 5 gallons inside while maintaining access to the vent. It's not a big deal, but you should prepare ahead before digging a hole and destroying the gas can. Though the hole I drilled was a very tight fit, I did add a small amount of gas proof gasket maker to my new vent plug, which was probably unnecessary. To fully enter it, I pounded on it with a rubber hammer. To make sure there were no plastic fragments left in the gas can, I did rinse it with some water (none came out, but you need to make sure). I let it dry out in the sun all day before going to fill it up with petrol. I almost want to claim that using this as fuel right now is a joy.My old can had a spout that you could turn inside and then seal it up, preventing the spout from protruding constantly. This one forbids that, but that is only a minor complaint.



GARAGE BOSS GB351 Briggs and Stratton Press 'N Pour Gas Can, 5 Gallon, Red Review:


If they attached a handle to the back, it would earn a five-star rating for performing as intended. However, I really like the spout.



Briggs & Stratton Smart-Fill 1+ Gallon Gas Can Review:


If they attached a handle to the back, it would earn a five-star rating for performing as intended. However, I really like the spout.



Briggs & Stratton 85053 5-Gallon Gas Can Auto Shut-Off Review:


You've had to put up with the annoying EPA-compliant nozzles if you've bought a gas can in the last ten years. Others cannot be readily changed to work or pour easily. I yanked the component out of the nozzle and removed the rotating flapper in a matter of seconds. After that, all you need to turn this into a standard gas can is a foot-long piece of 1" PVC tubing. It will pour easier if you add a plastic vent, but it's not absolutely necessary. Very simple mod, much simpler than many others, and requires no tools.


How long can you keep gas in a gas can?

You can keep gas in a gas can for a few months if it is stored in a cool, dry place. The gas will start to deteriorate after a few months and will need to be replaced.

How much is a 1 gallon gas can?

1 gallon gas cans typically cost between $10 and $20. You can find them at most hardware stores or gas stations.

Is 2 year old gasoline still good?

If you have a can of gasoline that's been sitting in your garage for a couple of years, is it still any good? The answer is maybe. Gasoline is a petroleum product and it will degrade and break down over time. The rate of degradation is accelerated by heat, light and oxygen. So, if your can of gas has been sitting in a hot garage, it's probably not any good. If it's been sitting in a cool, dark place, it might still be usable. If you're not sure whether your gas is still good, the best thing to

Is it OK to use gas that sat all winter?

If you're talking about propane or butane, then it's generally not a problem. Those gases are stored in tanks that are designed to keep them under pressure, so they don't go bad sitting around. However, if you're talking about natural gas, then it's a different story. Natural gas is a methane, and it can go bad if it's not used.

Is it safe to carry a gas can in your car?

If you must carry a gas can in your car, be sure to secure it so that it cannot tip over and spill. The best way to do this is to put the gas can in the trunk of your car.

Is it safe to leave a gas can in the garage?

It is safe to leave a gas can in the garage as long as it is in a well-ventilated area and is not near any heat sources. If you are concerned about the safety of your gas can, you can always purchase a gas can holder that will keep your gas can upright and secure.