4.7/5
Material: Poly-Urethane (PU)
Hardware: Included
*** The Lip Needs To Trim On Both Ends To Fit 2003-2004 Cobra Bumper ***
3M Double Sided Tape is REQUIRED for Installation (Not Included)
Fit: 99-04 Ford Mustang (See Product Description)
$234
I did it by myself. I put it in in around 30 to 45 minutes. Since I didn't have a drill bit, I utilized my own self-tap screws. I only used a handful of the supplied self-tap screws and around 10–12. To have a better idea, take a look at about 2-3 YouTube videos. It's not difficult. I did a very decent job for my first time doing it on my own at the age of 19. This also fits perfectly.
3.9/5
🀠Guard protection bumper spoiler rubber skirt, anti-scratch and decorative.while protecting your vehicle from curbs and scrapes.
🀠Quality automotive tape will not be affected by wet or cold weather and will easily endures all all types of weather, car washes and high speeds.
🀠Front lip Universal for most cars, trucks, SUV with easy to use 2.5M automotive tape.
🀠Carbon lip is a Easy to bend and conform to the shape of the bumper,Easy installation and good adhesion.
🀠Size: 6.6 x 4 x 2 inches
$234
Look no further if you're searching for an easy, affordable addition to your car that will give it some flair without costing a fortune.The total length is designed to leave some extra space while still covering the front of your car.It takes the form of your bumper and adapts to its shape and design, allowing it to be bent and twisted to fit.The 3M adhesive is strong on its own, but the lip also comes with screws for a bolt-on, polished appearance.The elegant carbon fiber design pops out in the sunlight.
3.5/5
Bolt on Installation,Instruction is NOT included, Professional Installation is Highly Recommended.
Package includes: 1x Rear Diffuser
30 Days Limited Warranty (This is NOT an OEM part. This product is designed to be a replacement for the OEM part)
For 2015-2019 Dodge Charger Scat Pack, Srt, Daytona
Style: OE Style | Material: High Quality PP (Polypropylene) | Color: Unpainted Raw Material Black
$234
Excellent goods, average company. This item cost $90 when it was initially produced, and it rapidly ran out of stock. The price was then increased to $130, which is still a fantastic offer, but they are currently advertised for $250. However, good luck obtaining any support from them if you run into issues.The overall standard is quite high. It only takes a few minutes to install, and the result is a beautiful, almost OEM-like appearance. Even had one SRT owner inquire as to why his didn't include it.
3.2/5
💕Made of durable and sturdy rubber.smooth and delicate cross-section,prevent scratches.flexible in use,Easy to bend,Have Excellent wear resistance.Bumper Lip completely fit with your bumper design.
💕Specification:long 250cm*wide 5.5cm/98.4 inch*2.16inch.Quality 3M automotive tape will not be affected by wet or cold weather.D.I.Y Car Front Lip fearturing in curved design, slim, Can be stick on front or rear bumper, body kit, side skirt,universal for most cars.
💕COMPATIBILITY: Rubber Door Bumper Protective strip can be Free deformation and Free clipping.requires no special skills or tools,Length is adjustable to your car, Equipped with screws to achieve better adhesion and fixation.
💕carbon fiber front lip energy Give your car an aggressive , It prevents nasty collision scratches and provides protection Get an aggressive and lowered look---- make your car looks more sporty!(case of damage or other reasons,please E-mail contact us, we will respond within 12 hours can do for you and arrange. Thank you very much for your order!)
💕Carbon lip function:To provide an elegant and personalized appearance,Front bumper guard anti-collision protective,protect from scrapes from driveways,speed bumps and curbs.protect cars from collision and alleviate the damage.
$234
on a Subaru Crosstrek; installed. Be warned that it has an unpleasant chemical scent when you first open it. Simply leave it flat for a few days in an empty room. The odor mostly disappears. The installation guidelines were written in Thai. LOL Nevertheless, there are photographs.Had to thoroughly clean the underside using wipes, soap, water, and alcohol. The cleaning may require several passes, but it is crucial. Don't be upset if it subsequently falls off because you were too lazy to take an extra 5 to 10 minutes to thoroughly clean the underside because it won't stick to a dirty surface. (Just a thought.)It comes with only two adhesive promoters when there ought to have been three. Although they quickly dry out, they are crucial to the adhesion process.The "triangles" for the bends must be measured and carved out, which takes considerable time. I simply marked the red tape with a pen to make an educated guess as to where the bends are, and then I marked the triangles from that point. The lip will also need to be forced to bend. Rubber makes up the lip; it isn't particularly stretchy.I would also advise cutting the triangles with household scissors. Since the rubber is so thick, I'm not convinced that regular scissors will do the trick. To stomp down on the scissor handles, I needed two hands.Three days have passed since the lip treatment. hasn't dropped off, which is fantastic. Additionally, I haven't used the screws yet, but I will definitely do so. I may need to submit a follow-up update once I've braved putting it through a vehicle wash.Overall, so far, I like it. If the front lip holds up through a car wash, thinking about purchasing two more for the side skirts. LOL I appreciate that it's rubber because I would cry if I cracked a genuine lip kit.*Update (4/3/18): The front lip is still in place following four automatic car washes and a few thunderstorms. However, I still haven't gotten around to fastening the screws.**Update (2/4/19): The front lip is still attached. One of the bends eventually needed two screws added since the "corner" was beginning to break off. (I had to cut "triangles" in the same spot to make it bend.) All things considered, the lip has held up admirably since the screws were put in January 2019.Sadly, today's unfortunate encounter with old tire debris caused damage to the front lip. The vehicle in front of me accelerated so quickly that I was unable to safely swerve or brake at highway speeds. The poor automobile handled it admirably.Interestingly, the lip is still in place. But where the lip and adhesive section meet in the middle, the lip's center portion broke horizontally. It will probably need to be replaced someday because the rubber will deteriorate and cause the gap to get larger. However, when the time comes, I'll buy three more. I'll add side skirts in addition to redoing the front lip.
3.2/5
💕COMPATIBILITY: Rubber Door Bumper Protective strip can be Free deformation and Free clipping.requires no special skills or tools,Length is adjustable to your car, Equipped with screws to achieve better adhesion and fixation.
💕Made of durable and sturdy rubber.smooth and delicate cross-section,prevent scratches.flexible in use,Easy to bend,Have Excellent wear resistance.Bumper Lip completely fit with your bumper design.
💕carbon fiber front lip energy Give your car an aggressive , It prevents nasty collision scratches and provides protection Get an aggressive and lowered look---- make your car looks more sporty!(case of damage or other reasons,please E-mail contact us, we will respond within 12 hours can do for you and arrange. Thank you very much for your order!)
💕Specification:long 250cm*wide 5.5cm/98.4 inch*2.16inch.Quality 3M automotive tape will not be affected by wet or cold weather.D.I.Y Car Front Lip fearturing in curved design, slim, Can be stick on front or rear bumper, body kit, side skirt,universal for most cars.
💕Carbon lip function:To provide an elegant and personalized appearance,Front bumper guard anti-collision protective,protect from scrapes from driveways,speed bumps and curbs.protect cars from collision and alleviate the damage.
$234
on a Subaru Crosstrek; installed. Be warned that it has an unpleasant chemical scent when you first open it. Simply leave it flat for a few days in an empty room. The odor mostly disappears. The installation guidelines were written in Thai. LOL Nevertheless, there are photographs.Had to thoroughly clean the underside using wipes, soap, water, and alcohol. The cleaning may require several passes, but it is crucial. Don't be upset if it subsequently falls off because you were too lazy to take an extra 5 to 10 minutes to thoroughly clean the underside because it won't stick to a dirty surface. (Just a thought.)It comes with only two adhesive promoters when there ought to have been three. Although they quickly dry out, they are crucial to the adhesion process.The "triangles" for the bends must be measured and carved out, which takes considerable time. I simply marked the red tape with a pen to make an educated guess as to where the bends are, and then I marked the triangles from that point. The lip will also need to be forced to bend. Rubber makes up the lip; it isn't particularly stretchy.I would also advise cutting the triangles with household scissors. Since the rubber is so thick, I'm not convinced that regular scissors will do the trick. To stomp down on the scissor handles, I needed two hands.Three days have passed since the lip treatment. hasn't dropped off, which is fantastic. Additionally, I haven't used the screws yet, but I will definitely do so. I may need to submit a follow-up update once I've braved putting it through a vehicle wash.Overall, so far, I like it. If the front lip holds up through a car wash, thinking about purchasing two more for the side skirts. LOL I appreciate that it's rubber because I would cry if I cracked a genuine lip kit.*Update (4/3/18): The front lip is still in place following four automatic car washes and a few thunderstorms. However, I still haven't gotten around to fastening the screws.**Update (2/4/19): The front lip is still attached. One of the bends eventually needed two screws added since the "corner" was beginning to break off. (I had to cut "triangles" in the same spot to make it bend.) All things considered, the lip has held up admirably since the screws were put in January 2019.Sadly, today's unfortunate encounter with old tire debris caused damage to the front lip. The vehicle in front of me accelerated so quickly that I was unable to safely swerve or brake at highway speeds. The poor automobile handled it admirably.Interestingly, the lip is still in place. But where the lip and adhesive section meet in the middle, the lip's center portion broke horizontally. It will probably need to be replaced someday because the rubber will deteriorate and cause the gap to get larger. However, when the time comes, I'll buy three more. I'll add side skirts in addition to redoing the front lip.
3.2/5
💕COMPATIBILITY: Rubber Door Bumper Protective strip can be Free deformation and Free clipping.requires no special skills or tools,Length is adjustable to your car, Equipped with screws to achieve better adhesion and fixation.
💕Made of durable and sturdy rubber.smooth and delicate cross-section,prevent scratches.flexible in use,Easy to bend,Have Excellent wear resistance.Bumper Lip completely fit with your bumper design.
💕carbon fiber front lip energy Give your car an aggressive , It prevents nasty collision scratches and provides protection Get an aggressive and lowered look---- make your car looks more sporty!(case of damage or other reasons,please E-mail contact us, we will respond within 12 hours can do for you and arrange. Thank you very much for your order!)
💕Carbon lip function:To provide an elegant and personalized appearance,Front bumper guard anti-collision protective,protect from scrapes from driveways,speed bumps and curbs.protect cars from collision and alleviate the damage.
💕Specification:long 250cm*wide 5.5cm/98.4 inch*2.16inch.Quality 3M automotive tape will not be affected by wet or cold weather.D.I.Y Car Front Lip fearturing in curved design, slim, Can be stick on front or rear bumper, body kit, side skirt,universal for most cars.
$234
on a Subaru Crosstrek; installed. Be warned that it has an unpleasant chemical scent when you first open it. Simply leave it flat for a few days in an empty room. The odor mostly disappears. The installation guidelines were written in Thai. LOL Nevertheless, there are photographs.Had to thoroughly clean the underside using wipes, soap, water, and alcohol. The cleaning may require several passes, but it is crucial. Don't be upset if it subsequently falls off because you were too lazy to take an extra 5 to 10 minutes to thoroughly clean the underside because it won't stick to a dirty surface. (Just a thought.)It comes with only two adhesive promoters when there ought to have been three. Although they quickly dry out, they are crucial to the adhesion process.The "triangles" for the bends must be measured and carved out, which takes considerable time. I simply marked the red tape with a pen to make an educated guess as to where the bends are, and then I marked the triangles from that point. The lip will also need to be forced to bend. Rubber makes up the lip; it isn't particularly stretchy.I would also advise cutting the triangles with household scissors. Since the rubber is so thick, I'm not convinced that regular scissors will do the trick. To stomp down on the scissor handles, I needed two hands.Three days have passed since the lip treatment. hasn't dropped off, which is fantastic. Additionally, I haven't used the screws yet, but I will definitely do so. I may need to submit a follow-up update once I've braved putting it through a vehicle wash.Overall, so far, I like it. If the front lip holds up through a car wash, thinking about purchasing two more for the side skirts. LOL I appreciate that it's rubber because I would cry if I cracked a genuine lip kit.*Update (4/3/18): The front lip is still in place following four automatic car washes and a few thunderstorms. However, I still haven't gotten around to fastening the screws.**Update (2/4/19): The front lip is still attached. One of the bends eventually needed two screws added since the "corner" was beginning to break off. (I had to cut "triangles" in the same spot to make it bend.) All things considered, the lip has held up admirably since the screws were put in January 2019.Sadly, today's unfortunate encounter with old tire debris caused damage to the front lip. The vehicle in front of me accelerated so quickly that I was unable to safely swerve or brake at highway speeds. The poor automobile handled it admirably.Interestingly, the lip is still in place. But where the lip and adhesive section meet in the middle, the lip's center portion broke horizontally. It will probably need to be replaced someday because the rubber will deteriorate and cause the gap to get larger. However, when the time comes, I'll buy three more. I'll add side skirts in addition to redoing the front lip.
3.1/5
💕Carbon lip function:To provide an elegant and personalized appearance,Front bumper guard anti-collision protective,protect from scrapes from driveways,speed bumps and curbs.protect cars from collision and alleviate the damage.
💕carbon fiber front lip energy Give your car an aggressive , It prevents nasty collision scratches and provides protection Get an aggressive and lowered look---- make your car looks more sporty!(case of damage or other reasons,please E-mail contact us, we will respond within 12 hours can do for you and arrange. Thank you very much for your order!)
💕COMPATIBILITY: Rubber Door Bumper Protective strip can be Free deformation and Free clipping.requires no special skills or tools,Length is adjustable to your car.
💕Specification:long 250cm*wide 5.5cm/98.4 inch*2.16inch.Quality 3M automotive tape will not be affected by wet or cold weather.D.I.Y Car Front Lip fearturing in curved design, slim, Can be stick on front or rear bumper, body kit, side skirt,universal for most cars.
💕Made of durable and sturdy rubber.smooth and delicate cross-section,prevent scratches.flexible in use,Easy to bend,Have Excellent wear resistance.Bumper Lip completely fit with your bumper design.
$234
on a Subaru Crosstrek; installed. Be warned that it has an unpleasant chemical scent when you first open it. Simply leave it flat for a few days in an empty room. The odor mostly disappears. The installation guidelines were written in Thai. LOL Nevertheless, there are photographs.Had to thoroughly clean the underside using wipes, soap, water, and alcohol. The cleaning may require several passes, but it is crucial. Don't be upset if it subsequently falls off because you were too lazy to take an extra 5 to 10 minutes to thoroughly clean the underside because it won't stick to a dirty surface. (Just a thought.)It comes with only two adhesive promoters when there ought to have been three. Although they quickly dry out, they are crucial to the adhesion process.The "triangles" for the bends must be measured and carved out, which takes considerable time. I simply marked the red tape with a pen to make an educated guess as to where the bends are, and then I marked the triangles from that point. The lip will also need to be forced to bend. Rubber makes up the lip; it isn't particularly stretchy.I would also advise cutting the triangles with household scissors. Since the rubber is so thick, I'm not convinced that regular scissors will do the trick. To stomp down on the scissor handles, I needed two hands.Three days have passed since the lip treatment. hasn't dropped off, which is fantastic. Additionally, I haven't used the screws yet, but I will definitely do so. I may need to submit a follow-up update once I've braved putting it through a vehicle wash.Overall, so far, I like it. If the front lip holds up through a car wash, thinking about purchasing two more for the side skirts. LOL I appreciate that it's rubber because I would cry if I cracked a genuine lip kit.*Update (4/3/18): The front lip is still in place following four automatic car washes and a few thunderstorms. However, I still haven't gotten around to fastening the screws.**Update (2/4/19): The front lip is still attached. One of the bends eventually needed two screws added since the "corner" was beginning to break off. (I had to cut "triangles" in the same spot to make it bend.) All things considered, the lip has held up admirably since the screws were put in January 2019.Sadly, today's unfortunate encounter with old tire debris caused damage to the front lip. The vehicle in front of me accelerated so quickly that I was unable to safely swerve or brake at highway speeds. The poor automobile handled it admirably.Interestingly, the lip is still in place. But where the lip and adhesive section meet in the middle, the lip's center portion broke horizontally. It will probably need to be replaced someday because the rubber will deteriorate and cause the gap to get larger. However, when the time comes, I'll buy three more. I'll add side skirts in addition to redoing the front lip.
3/5
High grade quality ABS material of replacement, superior craftsmanship and durability. MotorFansClub Lip Splitter elevates the appearance of any truck to the newest fashion trend.
Vehicle Application: This front bumper lip splitter is fit for BMW F30 3 Series M Style 2012 2013 2014 2015 2016 2017 2018.
Perfectly fit your car, protects the front end of your vehicle. accentuates the beauty of your vehicle.
Protects your cars from collision and alleviate the damage, protects your original bumper from road bumps and scratch.
Provide an elegant and personalized appearance, Front bumper guard anti-collision protective, protect from scrapes from driveways, speed bumps and curbs.
$234
My F30 has had this front lip fitted for more than a month, and it is holding up well. It goes without saying that the quality is inferior to that of a genuine carbon fiber part, but those can cost up to twice as much as this one. The ABS material is quite durable, and the fit is excellent. excellent value for the money. The lip's two-piece construction and misaligned carbon fiber pattern are the only drawbacks.
COPYRIGHT © 2019