A fan can be used as a fume extractor if the fan is powerful enough to create negative pressure in the room. This will pull the fumes away from the person using the fan and towards the fan.
Fume extractors are designed to remove harmful fumes and particles from the air in a workspace. They work by drawing in contaminated air and passing it through a series of filters to remove the contaminants. Fume extractors can be used in a variety of settings, including welding shops, auto body shops, and laboratories.
Fume hoods are designed to protect against fire by exhausting dangerous fumes and heat away from the user. By keeping the user away from the fire, the fume hood can help prevent serious injuries.
If you work with soldering irons, woodworking tools or other materials that produce fumes, you may want to consider using a fume extractor. Fume extractors remove harmful fumes and particulates from the air, making it safer to breathe in your work area.
4.6/5
US based customer support, 30 days full satisfaction no question asked return period.
Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.
0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.
Easy to replace filter, Includes one replacement filter. Working temperature: -20Γ’βΖΓ―Β½ΕΎ60Γ’βΖ, Power consumption: 120V, 30W (50 / 60Hz).
Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station
$234
I tested it right away after receiving it. I agree with others that the fan appears to be quite potent. The metal construction of the case gives it a solid feeling. Additionally, the carbon filter seems pretty tight in the case and is unlikely to come loose during routine transportation. It's about as simple as it gets. All that is present is a fan within a metal container with a carbon filter on the front. I can conclude that this Chinese fume extractor is definitely the best quality for the price range after using some others with fancier stands and similar prices (like the Aoyue available on Amazon).It would be challenging to find a better solution for the money if you require a straightforward fume extractor.
4.5/5
The Powerful Remove Fume Extrator and handy carry
Great for electronics, arts and crafts, and stained glass work
Long-lasting working time for over 50,000 hours
Easy to replace filter
Sturdy Aluminium alloy material
$234
This is excellent if you only solder sometimes. I'm worried that if you solder all day, the fan will make you feel lightheaded at the end of the day. As long as you solder within maybe 4 inches of the fan, it works really well. Once it leaves that area, it is useless. The quantity of soldering I perform is reasonable. In fact, I purchased two of these. One to put directly in front of where I'm soldering, and the other to put immediately next to my soldering iron stand to capture any leftover smoke after I resolder the tip before putting the handle back in the stand. Like I stated, it is decent given the cost. Although it is not a $500 filtration system, it is still an improvement. If you're going to be performing a lot of soldering with these fans as your only filtration, I'd recommend wearing an activated carbon mask and having good ventilation.
4.2/5
ESD-safe by design and is made of ESD-safe materials
Activated Carbon filter contains over 8g of highly activated carbon
Can be operated standing up or laying down in a low-profile position
Low profile position provides approximately 2-1/2 times the airflow and efficiency
Quick and easy filter replacement
$234
Functions like it should. I believe that many reviewers of extractors have unrealistic assumptions regarding how these devices function (which is a physics problem, not a problem with Hakko). I'll make an effort to briefly explain why this product is adequate given its price and promise.Pros:simple to set up and utilize Plug it in, turn the switch, and place the filter on the front grate. You are removing.decent extraction Everything nearby will be sucked through. The most effective way to utilize the unit is to set it face-down on your bench with your soldering project right in front of it, according to the instruction booklet, so that vapors enter the lower grill of the device. The device is great when used in this manner. For example, if your shop is filled with smoke and you need to leave the unit on for a while to process as much air in the room as it can, it works better when set upright at emptying a room. In either case, it delivers on its promises.A desktop arm is also offered by Hakko. Really, purchasing an arm to hold the unit directly above your workspace would be the best method to extract the most vapors from a unit of this type. Since the heated fumes rise naturally, the extractor has an easier time catching them. Create a technique to hold this unit over your project if you want to get the best value for your money.Cons / Physics Explanationwon't suction air three feet away. Kids, I'm sorry, but physics doesn't operate that way. A straightforward fan unit is unable to receive a column of air from a distance. The fan produces a low-pressure area directly in front of the appliance. This means that air rushes into the device in a pattern that is roughly semi-spherical. Yes, in order to get effective extraction, you must place your soldering work directly in front of the machine. No, neither Hakko nor anybody else can make that right. If fumes are a serious concern for you and you are unable to move your unit closer to the extractor, you have two options: ventilate your entire room (wear a mask and purchase an extractor hood similar to what you would find in a restaurant), or purchase an arm to mount this unit directly over your workspace.is not completely silent. Many people seem to be complaining, yet the device is actually just as loud as a fan of this size drawing air through a filter. Although I'm sure it's rather loud directly by your ear in ideal laboratory settings, it's quiet for its class. This is the typical sound of a high-quality fan in a real workshop. Nothing major.The only major drawback is that, despite being tough, the relatively thick plastic design does restrict ventilation a little. It's difficult to argue with this reasonable tradeoff because it prioritizes longevity over pure efficiency. But with a little additional design work, it could have been possible to increase airflow by, say, 10% while maintaining durability.Overall: There's a good reason why so many people adore this Hakko unit. It very much is what you would anticipate. Take one.Additional advice: To extend the life of your filter, place a cotton batting or simple mesh screen in front of the carbon filter. A straightforward screen will keep the filter from absorbing background dust while still processing all of the undesirable material that passes through.
3.8/5
ESD safe, great for electronics, arts and crafts, soldering station work.
Sturdy Aluminium alloy material and long-lasting working time.
Super easy to set up and easy to replace filter.
Portable and low noise, quiet and high-efficient fan.
The powerful remove fume extractor absorber fan with adjustable arm and flexible table clamp, absorbing angle great for soldering station work.
$234
I dabble in electronics as a pastime, and occasionally I have to solder wires and circuit boards. I don't solder enough to switch to lead-free solder, which requires higher temperatures and doesn't flow as smoothly as solder that contains lead. It is convenient to have a fan that I can direct toward the soldering area to capture vapours there.
3.5/5
$234
When working with stained glass, this fume extractor works excellent for removing solder vapours. When working with other products that release unpleasant or dangerous fumes, I have also employed it. Since I can't vent to the outdoors from my worktable, this unit eliminated the fumes problem. Because of its small size, it doesn't take up much room on my work table. Happy with this purchase a lot.
3.4/5
The filter consists of foam and activated carbon, Which is ideal for absorbing toxins
Low noise and high- efficient fan
Made of antistatic material
Easy to replace filter
Adjustable absorbing angle
$234
Right out of the box, this smoke absorber functioned flawlessly. When this absorber arrived in the mail, it was just in time for me to test it out. I plugged it in and turned it on, and it immediately and quietly drew the smoke in. Simply insert the filter and turn it on because the entire machine is already put together. works perfectly for the hobby application that I had in mind.
3.2/5
Adjustable absorbing angle
The filter consists of foam and activated carbon, Which is ideal for absorbing toxins
Easy to replace filter
Made of antistatic material
Low noise and high- efficient fan
$234
My soldering exhaust fan arrived with a cable issue just where the plug was. When hooked in, the fan will turn on and off as you move the cord.I spoke with the vendor and described my issue. In a prompt reply, the seller offered to send a new device. They didn't have me deal with the nonsense of returning the previous one.When I got the new device, it performed as expected. To collect the fumes, your project needs to be relatively close to the fan. I enjoy it because my wife doesn't yell at me for stinking up the home anymore and the house no longer reeks while I'm soldering!
2.6/5
High Quality - Made of ESD safe material, lightweight and durable material. Low noise and high- efficient fan operates at acceptable db levels in solder workstations.
Wide Applocation - Great for electronics, arts and crafts, and stained glass work.
Safe and Portable - The Powerful remove smoke,sodering fumes,flux smoke,odor from soldering stations,workstations, nails, paint etc quick,safe and handy carry.
Guarantee - If you have any quality problems with our products, please contact us immediately by email, we will solve your problems within 24 hours.
With Extra 6 Pack Filters - Comes with 6 active carbon filters, easily replaceable by swamping out old for new one in filter slot. Pull filter guard out to remove filter and replace with new one.Then push back filter guard to hold filter in place.
$234
There are no instructions or an on/off switch to be found; all I can locate are some oversized carbon filters and a sizable quiet case fan.
A fume hood is a ventilation device that is designed to limit exposure to hazardous or toxic fumes. Fume hoods are typically used in industrial and research settings where there is a potential for exposure to dangerous chemicals or fumes. Fume hoods work by drawing in air from the surrounding area and passing it through a filter before it is released back into the environment. The filter removes the harmful fumes and vapors from the air, making it safe for people to breathe.
A fume hood is a type of ventilation system that is commonly used in laboratories and other industrial settings. They are designed to remove harmful fumes and gases from the air, and to keep them from entering the respiratory system of the people who are working in the area. Fume hoods are considered to be very effective at protecting workers from exposure to hazardous materials, and they are often required by law in many industries.
An extractor fan is a mechanical ventilation device that is used to expel stale and moist air from a room. In most cases, an extractor fan is used in bathrooms and kitchens to prevent the build-up of mold and mildew. While an extractor fan is not a legal requirement, it is highly recommended, especially in homes where there is a lack of ventilation. Without an extractor fan, the build-up of moisture can lead to the growth of mold and mildew, which can cause health problems.
Fume hoods are not to be used when working with hazardous chemicals that require a higher level of ventilation than what the fume hood can provide. In these cases, the proper ventilation system must be used.
COPYRIGHT © 2019
