Vaseline can help keep refrigerator seals from drying out and cracking. By keeping the seals lubricated, it can help prolong the life of the seal and keep your fridge running smoothly.
If your freezer isn't keeping things as cold as it used to, it might be time for a new seal. To check if your seal needs to be replaced, put a piece of paper in the door and close it. Then, try to pull the paper out. If it comes out easily, your seal is probably worn out and needs to be replaced.
If your freezer is leaking, it is most likely due to a build-up of ice. To stop your freezer from leaking, you will need to defrost it. First, turn off your freezer and unplug it from the power outlet. Next, remove all food from the freezer. Once the food is removed, use a hairdryer or a heat gun to melt the ice. Once the ice is melted, clean the inside of the freezer with a mild soap and water solution. Finally, dry the inside of the freezer completely and plug it back in.
A freezer compressor is a mechanical device that helps to circulate coolant within the freezer. The compressor pressurizes the refrigerant and circulates it through the coils and fans in the freezer. This process helps to remove heat from the freezer and keep the contents inside at a consistent temperature.
5/5
Replaces Part:W10416065, PS8746522, 67003186.Compatible Brands:Whirlpool, KitchenAid, Kenmore.
Superiority: It is easy to install, saves time and effort, and can save you a large amount of maintenance costs.
QUALITY GUARANTEED : The replacement part is made from durable high quality material and well-tested by the manufacturer.
PARTS NUMBER：W10613606 Compressor Start Relay and Capacitor.
PROMISE: If you're not completely satisfied, you can ask for a replacement or refund.
$234
All I know is that when I woke up on Monday morning, my Frigidaire refrigerator (model # FRS6LR5EM6) didn't sound right. I'm not sure if the old start relay and capacitor failed because of age (13 years) or because of lightning from storms the previous night. The compressor would attempt to engage, operate for a brief period of time, create a clear "click," and then stop. I searched the internet because I was afraid I would have to spend more than $1000 on a new refrigerator and discovered that a broken starter or capacitor was most frequently to blame. I looked up the part number using the model as a search term and immediately went to Amazon. A new start relay and capacitor arrived about 36 hours later, and I replaced them without any problems. Fortunately, we had a second refrigerator in our garage to store our food till then. I used the occasion to dust out the coils and fan after 13 years of labor. I flicked the breaker after completing the installation, plugged in the refrigerator, and crossed my fingers. Success! The fridge quickly began chilling down as the compressor roared to life. It has returned to operating temperature as of this morning, and the compressor is functioning normally with no "clicking" sounds. You can save a lot of money by replacing the starter/capacitor yourself if your refrigerator is experiencing similar problems. There are numerous videos online that demonstrate how to do it precisely. Before performing any repairs, don't forget to disconnect your appliance!
4.3/5
Replaces Part:W10416065, PS8746522, 67003186.Compatible Brands:Whirlpool, KitchenAid, Kenmore.
Superiority: It is easy to install, saves time and effort, and can save you a large amount of maintenance costs.
QUALITY GUARANTEED : The replacement part is made from durable high quality material and well-tested by the manufacturer.
PARTS NUMBER：W10613606 Compressor Start Relay and Capacitor.
PROMISE: If you're not completely satisfied, you can ask for a replacement or refund.
$234
I discovered this on sale for two times as much as the OEM unit for my Uline 2015WCB wine cooler. I made the decision to give it a try, and it has been operating well for a while now. It perfectly fits the frame mount. The replacement temperature sensor has a straight lead, thus I had to spiral it to avoid any problems. Due to the shorter temp shaft, the dial will alter the temperature but will not stay on the shaft. It now conveniently rests in the cooler's bottom. The desired 52 degrees have been maintained continuously using the #1 temperature setting. To this enophile on a tight budget, it is definitely a good price.
4.1/5
Quality Replacement Refrigerator Main Board for GE
Part Numbers; WR55X10942 PS2364946 AP443621 WR55X10942P WR55X10942 WR55X10956, WR55X10560, WR55X10968, WR49X10152, WR55X11098, PS2364946 AP443621 WR55X10942P
"Please contact us before purchasing to confirm compatibility. This part may look identical to your board, although it fits some models. Please contact us with your model # of your fridge to confirm."
A constant clicking from the motherboard indicates a bad board. A bad motherboard may show burnt marks or bad soldering joints from overheating on the front or back of the board. If the refrigerator lights dim when you get ice/water, or if the ice melts and refreezes are also signs of a bad motherboard. A hum and then a click a few seconds later from the compressor indicates a compressor or relay issue but not a motherboard problem.
Quality Design Backed by 1 YEAR WARRANTY for Peace of mind
$234
Perfect replacement for the original control board. The fridge's front-mounted controls were blinking, and the refrigerator's cooling only worked occasionally. I made the decision to replace the control board rather than hire a repairman after consulting online suggestions. Uncomplicated replacement Before removing the old board and wiring harness, I advise you to take images of them. You have to unhook a number of harnesses. You can locate where to reinstall with the aid of pictures. The replacement ground wire was shorter than the original, which presented a problem, but it was simple to ground to a different cover screw. Board simply clips onto plastic studs to hold it in place. Photo represents the original board.
4.1/5
LENGTH: The line length of this ice maker connector is 25 inches long
CONNECTION: This connector has a 1/4-inch compression connection
MATERIAL: This ice maker connector hose is made of high-impact braided 304 stainless steel exterior with a PVC core, nylon reinforcement and a clear vinyl outer shell which provides strength
CERTIFICATION: Lead-free certified for safe water drinking
INSPECTION: Supply lines should be inspected periodically and replaced every 5-years
DURABLE: The sturdy stainless steel supply line has superior flexibility and easy installation
$234
I therefore moved the old refrigerator to the Man Cave and bought a new one. In order to supply water for the water dispenser and ice maker in the Man Cave, the old refrigerator required a long hose. I was intending to purchase one at a nearby home improvement retailer, but I was unable to locate one in the length I required. Naturally, I went to Amazon to check if they had one in the length I required, and naturally they did.Because the hose is braided from stainless steel, I can rest easy knowing that it won't rupture or break under pressure. I don't know about the rest of you, but I've had a water hose break previously, and if I hadn't been there to stop it, my house would have experienced terrible flooding. A neighbor of mine actually experienced it when he was gone for a three-day weekend; a plastic water line broke inside his home, flooding the entire first floor! Because of this, I now insist that any home I live in only have braided hoses made of stainless steel, just like this one. They are a great deal more dependable and much less likely to crack or explode under strong water pressure.Nevertheless, I built this water line from the copper pipe above the water heater where I also placed a T-Valve, and now I have water flowing to my Man Cave refrigerator. When I watch the football game or anything else in the Man Cave, I always have water and ice for my drinks. It works beautifully. I'm very grateful that this water line was available on Amazon in the length I required!Absolutely 5 out of 5 stars from me!NOTE: If you've been in your home for more than ten years and have never checked your water pressure using a water gauge, you should do so immediately. The reason is because if you have a water pressure reducer installed to help with the problem of high water pressure from your water utility, guess what? The typical lifespan of that reducer is only 10 years! Therefore, you might need to replace it right away! A water pressure that is too high could damage your pipes and water lines as well as hasten the deterioration of your appliances. Check it out as soon as you can; there may be videos available on Amazon and other places. that can demonstrate how to accomplish that; it is not difficult. I am not Mr. Fix It, so I am aware of this:-)
4.1/5
Fits with various LG brand models
Manufacturer Model #AAP73631602
Genuine Replacement Part
Refer to you manual to ensure ordering the correct, compatible part
LG Item
$234
There is nothing you can do about the weak original design, which is why this tray easily breaks the white plastic tabs near the top. That's because the wrong strength plastic is being utilised.We received a replacement second tray from Amazon in a timely manner, so we had a positive experience getting our LG back in working order.With the end, I avoided a future break by using a plastic bonding adhesive to reinforce the connections in a different type of plastic on this third effort. This way, if I "accidentally" try to dump a gallon jug in this particular tray, it won't be destroyed.Please open-source your refrigerator designs if LG is listening so that the public can propose updates.
3.8/5
IMPORTANT; Make sure to DISCONNECT the refrigerator before replacing the led. High chance of causing short curcuit if you change the led while refrigerator is plugged in. connected
W10515058 replaces: WPW10515058, W10465957, W10522611, WPW10515058VP, PS11755867, AP6022534, 3021142.
Quality Design by Icetech Backed by 1 YEAR WARRANTY for Peace of mind
IMPORTANT; Before Purchasing this item, you must check the other two led lights in the refigerator. One is located in the mid section of the cooler side, the other one is located in the freezer side. If any of these lid lights are bad they must be replaced before the new main board. if these led lights are bad it will cause the main board to burn shortly after installation.
This high quality part works with the following brands: Whirlpool, Kenmore, Maytag, KitchenAid.
$234
the priciest lightbulb ever made. Bulb prices for refrigerators used to be around $2.50. Well, it is what it is in 2019, so this is what they cost right now.For my 4-year-old Kenmore side-by-side, I ordered this bulb. When opening the door, the original bulb would behave like a strobe light.The replacement was sent, and while it operated better, for the first five seconds after the door opened, it flashed like a strobe. DEFECTIVE!An immediate replacement and return shipping label were given by Amazon. NO TROUBLE!In two days, a replacement arrived, was installed, and is currently operating flawlessly. Two days later... I adore Amazon!
3.2/5
IMPORTANT PLEASE READ BEFORE PURCHASING; Make sure to DISCONNECT the refrigerator before replacing the led to avoid burning the new led. Also Please make sure the secondary lights, located in the freezer side and mid section of the cooler side are working well. If any of these lights are out, the main light you are about the replace will not work, and not only it will not work, but it will fry.
IMPORTANT PLEASE READ BEFORE PURCHASING; Please note this listing is for the main led light located in the ceiling of the cooler side. This part will not work as replacement to secondary lights located in the mid section of the cooler or for the light located in the freezer section. The part # for the secondary lights are W10515057
This high quality part works with the following brands: Whirlpool, Kenmore, Maytag, KitchenAid. / Quality Design Backed by 1 YEAR WARRANTY for Peace of mind - The package includes one high quality led light designed fit for Whirlpool and many other major brands
IMPORTANT PLEASE READ BEFORE PURCHASING; Before Purchasing this item, you must check the other two led lights in the refigerator. One is located in the mid section of the cooler side, the other one is located in the freezer side, both part # W10515057. If any of these lid lights are bad they must be replaced before the new main board W10515058 installed . if these led lights are bad it will cause the main board to burn shortly after installation. "
W10515058 replaces: WPW10515058, W10465957, W10515058, W10522611, WPW10515058VP, PS11755867, AP6022534, 3021142.
$234
You need Adobe Flash Player to view this video.Download Flash Player.The new light is functional, but as it gradually becomes fully bright, there is a strange flicker. The unusual behavior could be explained by the fact that the control board does not exactly match the OEM board. The second item ordered is this. Only once did the first light that was replaced work, but Amazon soon provided a replacement.
The average freezer will last between 12 and 15 years. However, this number will differ based on the make and model of your freezer as well as how well you maintain it. If you keep your freezer clean and free of frost buildup, it will help prolong its life. Additionally, unplugging your freezer when it's not in use will also help increase its lifespan.
Most people believe that meat should be stored on the bottom freezer because it is the coldest part of the freezer. The bottom freezer is also the most convenient place to store meat because it is easier to reach.
There are three types of freezers: chest freezers, upright freezers, and compact freezers. Chest freezers have the largest capacity and are the most energy-efficient, while compact freezers are the smallest and most portable. Upright freezers are a middle ground, offering more space than compact freezers but not as much as chest freezers.
Refrigeration systems have four major components: a compressor, a condenser, an expansion valve (or orifice tube), and an evaporator. The compressor pumps refrigerant vapor under high pressure to the condenser where it is condensed to a liquid. The expansion valve (or orifice tube) regulates the flow of the liquid refrigerant into the evaporator at a temperature lower than that of the space to be cooled. The evaporator absorbs heat from the space to be cooled and changes the refrigerant from a liquid to a vapor. The now-vaporized
The refrigerator has five main parts: the compressor, the condenser, the evaporator, the expansion valve, and the refrigerant. The compressor pumps the refrigerant through the system. The condenser removes the heat from the refrigerant. The evaporator cools the refrigerant. The expansion valve regulates the flow of the refrigerant. The refrigerant cools the air in the fridge.
A fridge typically has four main parts: the compressor, condenser, evaporator, and expansion valve. The compressor pumps refrigerant through the system. The condenser removes heat from the refrigerant. The evaporator absorbs heat from the air. The expansion valve regulates the flow of refrigerant.
COPYRIGHT © 2019
