Flutes are one of the most popular instruments in the world, but they can also be one of the most difficult to play. Professional flutes are usually made of metal, which makes them much harder to control than the wooden or plastic flutes that beginners use. The metal is also much smoother, so it's easy for the fingers to slip and make mistakes. The good news is that professional flutes usually come with a lot of extra features that make them easier to play. For example, they often have split keys, which make it easier to reach the correct notes. They
You can use a leaf as a flute by cutting a slit in the center of the leaf and blowing into it. The leaf will produce a sound that is similar to a flute.
To store a flute long term, you will need to find a case that is specifically made for holding a flute. These cases are typically made of wood or plastic and have a padded interior to protect the flute. You will also want to make sure the case is closed tightly to keep out dust and other debris.
The flute is a musical instrument with a very distinctive sound. It is also one of the oldest instruments in the world, with evidence of flutes dating back as far as 43,000 years. But how high can flutes actually go? The answer to that question depends on the type of flute you are talking about. The most common type of flute is the concert flute, which has a range of about three and a half octaves. This means that the highest note a concert flute can play is about two and a half times as high as the lowest
4.7/5
※ Double-purpose -- Eastar EST-005 Flute & Clarinet Stand is a double-purpose stand for clarinet and flute, realizing a dual-purpose motor.
※ Package Content -- Eastar EST-005 flute & clarinet stand x 1, portable flannel bag x 1.
※ Protective -- The 0.05inches/1.1mm mm thick pipe wall is firm and durable, can’t be bend, and the toe is covered with a rubber protective film to provide strong grip and prevent damage and scratch to the wooden floor.
※ Stable -- The short three-legged structure is very stable and suitable for use as a stage stand, with a leg support radius of 4.76inches/120.9mm, an effective flute support position of 4.76inches/120.9mm, and an effective clarinet support position of 6.2inches/158mm length .
※ Durable -- The head is made of environment-friendly plastic material, which is waterproof and corrosion-proof, has high strength and strong durability, so that the main structure of the bracket does not crack after long-term use.
$234
a beautiful and durable stand. Despite the fact that it can support a clarinet, I had to add some felt to keep my bell from lying on the metal. Actually, it's a clarinet stand that can support a flute. It can also be used successfully with a clarinet if you're prepared to be a little creative.
4.6/5
Folded size: 320x190mm (12.6x7.5")
Swivel Legs fit around other equipment
Brand: HERCULES STANDS
Weight: 1.2 kg (2.5lbs)
2 SFF-Coated Flute/Clarinet Pegs and Piccolo Peg Detach for Storage
$234
With this purchase, I'm ecstatic. I needed a technique to control my alto, tenor, and soprano recorders during jam sessions with other musicians. It becomes awkward attempting to keep one's toes pointed to prevent the recorders from rolling off one's lap, as other people have noted.The DS543BB Flute/Clarinet Stand is what I bought.Two (2) DS502B Velvet Pegs for Flute/Clarinet and (1) DS504B Velvet Peg for Piccolo are included with the stand as standard.Just in case, I made the decision to order a second DS504B (Piccolo) peg, and I'm glad I did. My soprano and alto recorders both fit comfortably on the two DS504B (Piccolo) pegs, but my alto does not fit on the second DS502B (Flute/Clarinet) peg. Perfect fit for the tenor recorder on the DS502B (Flute/Clarinet) peg. Though I don't believe I want to replace either the soprano or the alto, I am preserving the additional DS502B (Flute/Clarinet) peg in case I ever decide to pick up a lower-than-tenor register recorder or if I decide to buy a low-D penny-whistle.I play Yamaha recorders made of ABS plastic, model numbers YRS-24B (for baroque soprano), YRA-28B (for baroque alto), and YRT-304B (for baroque tenor).Just (relatively) cheap recorders, but I'm still quite grateful for a means to keep them off the floor when I frequently switch between instruments (or to avoid having to tuck them under my arm).We appreciate the thorough assessments that the other recorder players provided. This enabled me to focus on finding the ideal stand for my instruments.
4.5/5
K&M zinc die-cast legs ensure durability and stability
Folded up, the stand can fit in your back pocket!
Unique, compact and extremely light flute stand with black plastic peg and detachable base
$234
I'm a professional musician, therefore I gave my sister this flute stand as a present (also a pro musician). What a wonderful gift!The flute stand my sister already owns (the K
4.5/5
Model# DS602B
The peg is lined with velvet to prevent scratches in the bell of either a trumpet or cornet.
Brand: HERCULES
Specifically designed to fit Hercules Stands.
$234
My Hercules Saxophone Stand can be readily threaded with this DS602B by hand. It includes a nut at the threads so that you can use a wrench to tighten it to the stand, but I don't think it's essential. When I set up for gigs, I use it, attach it to the stand, and then take it off when I fold the stand for storage (it doesn't fold up with the stand). Regarding its functionality, I have no issues. Its diameter is great for fitting inside my flute, and the felt coating adds a wonderful touch. The stand is well-built, but I haven't figured out why it springs into action (the upper head pushes downward and returns to its height by an internal spring). I would argue that it is overengineered if I had to criticize it in any way. My requirement for a flute stand would be satisfied by a basic felt peg. Some of its features may be modified for those since it is also offered as a stand for other instruments. It is a useful tool, and I would buy it again.
4.5/5
Includes carry bag
Weight 0.5 kg (1.1 lbs)
Swivel legs with locking pins
Folded size 185x90mm (7.3 x 3.5")
$234
This stand was just delivered to me today, three days ahead of schedule, and it supports my flute flawlessly. The Hercules DS602B DLX Flute/Clarinet peg is a big improvement over the Hercules DS502B Flute/Clarinet peg, which is sold with their other flute/clarinet stands in my experience and causes the flute to wobble more frequently. The flute is precisely balanced and perpendicular to the ground as it rests on the peg.The stand on its own is also excellent. Despite having short legs, it is strong and heavy, making it difficult to tip over. It can be carried easily and used with other Hercules stands, such as the well-known Hercules DS543BB 2 Clarinet/FLUT 1 PIC Stand, thanks to its ability to fold up into an even smaller size. It also comes with a bag to contain the base and the peg, which can be separated from the base for simple carrying.
4.5/5
✔LIFETIME STRUCTURAL WARRANTY - The STRING SWING FLUTE HANGERS are CERTIFIED 100% MADE IN USA with REAL AMERICAN STEEL and backed by a LIFETIME STRUCTURAL WARRANTY –and Add yours to cart Now and keep your flute safely stored while supplies last!
✔UNLIKE THE “TYPICAL†FLUTE HANGERS OF UNKNOWN origin and quality that potentially puts even the finest FLUTE like Mendini, Yamaha, Glory, Lazarro, and Sonata in “life threatening†danger, the STRING SWING FLUTE HANGERS are CERTIFIED 100% MADE IN USA with AMERICAN STEEL and backed by a LIFETIME STRUCTURAL WARRANTY, all that to provide maximum structural integrity and safety, so no matter if you are playing your instruments or not, they are always in the “right handsâ€
✔SECURELY STORES ALL STANDARD FLUTES– Great for all sizes of standard flutes; Keeps your instrument within easy reach to play more often; great for band room and home wall use
✔OVER 30 YEARS SERVING MUSICIANS ALL OVER AMERICA – No matter what kind of flute that you have, you can count on us to keep it safely stored, we have been crafting the best musical-instrument hangers and display systems that you can buy for over 30 years; Our products are manufactured in Wisconsin, where we started, and are guaranteed for life
✔FLUTES ARE MORE THAN JUST INSTRUMENTS – While safer when transported inside a case along with your oil, cleaning kit rod, and other maintenance products, flutes are also practically “meant†to be displayed for your enjoyment even when you are not rocking it, the STRING SWING FLUTE HANGERS will turn your flute into a piece of “Wall Art†while keeping it safe and sound
$234
What a fantastic find! My room is carpeted, and my travel flute stand is a little shaky on carpet, so I worry that my cat might knock it over or that it would go over on its own when I leave my flute out. Looking around for a more reliable flute stand alternative, I came across this. This wall-mounted stand is one of my favorites because it leaves no trace and is easy to use from my practice chair.I used 3M Command 15 lb velcro picture hanging strips to make the installation easier (which is more than enough for a flute). I mounted it on the lower half of the wall in the space where I practice because it is both reliable and practical. I'm comfortable putting my flute out right now, whether it's for a brief practice break or a longer session. I heartily endorse this item!
4.5/5
Folded size 315mm x 100mm (12.4" x 3.9")
Two additional instrument peg holes for storing additional instruments.
Brand: HERCULES
Includes carry bag
Height 345mm (13.6-Inch ), Weight 0.68 KG (1.5 lbs.), Base Diameter 200 mm (7.9-Inch )
$234
This stand was purchased to go with the peg marked "Hercules DS602B DLX Flute/Clarinet PEG W/SPRG." (By the way, the peg fits this stand quite beautifully.) This stand is nicely balanced and weighted, and it has wide legs with rubber tips. It is quite stable and appears to be well-made. One of the longest alto pegs I've ever seen is included, and it screws into the base of the stand with great security. I appreciate that the bottom and tip are cushioned with rubber foam to prevent scratching the end of my instrument. This stand feels quite stable overall, and my flute does not budge at all. A wonderful extra is the carrying bag, which keeps the base and pegs intact. It travels well and folds up rather small. I'm so delighted I bought it, and I have no doubt that it will be my side for many years while I perform.
4.4/5
4-leg flute stand
Robust steel core
Black finish
6.5mm diameter rubber peg
For holding soprano and piccolo flutes
$234
I picked up this useful small holder for my soprano recorder. Since we interchange instruments frequently during rehearsals, I will primarily use this there. It is convenient to have a small stand on the floor adjacent to my music stand. It should be fine because it is stable enough. I had to think about how to open it for a while. There were no instructions included. To create a base of four legs, you must first unscrew the large open-ended nut (like a bottle cap without a top), slide it entirely off the shaft (see photo), and then screw the nut back onto the upright stem that supports your instrument. Do everything backwards to fold it up again. I'm not sure it needed to be this pricey, but it will get the job done, so I can't really complain.
4/5
Feet covered by rubber caps for adding much more friction.
Durable metal feet hold instrument stably.
Mini in size and foldable, easy to pack up and carry along.
Designed for wind instrument like Oboe, Flute, Clarinet, etc.
Material: Metal and Plastic
$234
This appears to function perfectly. When not in use, it tucks within the trumpet bell, and I appreciate how the felt lining protects the interior bell polish. Those who claim it readily tips over, well... It would undoubtedly fall over if someone ran up to it and gave it a drop-kick, but in most situations, I believe it will hold up just fine. Any trumpet stand would fall over in the time it would take to knock this over. Seems to be fairly decent value. I've seen stands where the screw mechanism is a little smoother and requires less effort, so I can't give it five stars. Maybe it's made even more shoddily. But I trust this with my Strad because I think it's worth the money.
4/5
Easy to install, just plug top part into tripod and rotate the screw.
It is designed for wind instruments like Oboe, Flute, Clarinet, Soprano Saxophone, etc.
Portable and foldable design and easy to carry along and pack up.
We aim to provide each customer with a highly standard of customer service. If the stand doesn't satisfy you for any reason, simply contact us, we take all quality related issues seriously.
Three durable metal legs covered with rubber caps holding instrument stably. Not including flute.
$234
wanted a clarinet stand for a while! Additionally, this one made me a bit uneasy because it didn't seem as solid as others, but it is. Even with my flip folder attached, it securely retains my clarinet. The only drawback would be how heavy it is to store. When storing my clarinet, I'd love to be able to fit it in the bell, however it doesn't fit like other stands. Although it doesn't fit in the bell ignoring the clarinet when folded, it is still a very nice stand, therefore I can't store it there. Even though I didn't spend $30 on it, I still adore it a lot. I'm overjoyed. It's a wise purchase.
How tall should my music stand be? This is a question that many musicians ask, and there is no one correct answer. Depending on the height of the musician, the type of music being played, and the instrument being used, the ideal music stand height can vary. For example, a taller musician may need a taller stand to see over their instrument, while a shorter musician may need a shorter stand to be able to reach the music. Ultimately, the best way to determine the ideal height for your music stand is to experiment and find what works best for you.
No, a music stand is not necessary. While they can be helpful, they are not required in order to play music. Music stands can be expensive and take up a lot of space, so if you are tight on budget or space, you can definitely get by without one.
The bass flute is the lowest-pitched member of the flute family. It is a transposing instrument pitched one octave below the concert flute. The bass flute is usually only used as an accompaniment instrument in a symphony orchestra, although some solo and chamber works have been written for it.
The flute used in Titanic is a concert flute. It is made of wood and has a silver-plated headjoint, body, and footjoint. The flute has a C footjoint and open holes. It is pitched in C and has a range of three octaves.
A big flute is called a bass flute. It is the lowest-pitched member of the flute family.
COPYRIGHT © 2019