A breeding box is a small aquarium or fish tank that is used to house fish during the breeding process. The breeding process can be stressful for fish, so a breeding box helps to create a more controlled environment. Breeding boxes are typically placed inside of a larger aquarium. This allows the fish to have access to the larger tank for swimming and exploring, while still providing a safe space for breeding. Breeding boxes come in a variety of sizes, so it is important to choose one that is appropriate for the size of your fish. They should also be made of a material
A breeder tank is typically at least 20 gallons, and often larger. The size of the tank is important because it allows the parents plenty of room to move around and the fry (baby fish) have plenty of places to hide.
The size of a tank for breeding fish will depend on the type of fish being bred. Some fish can be bred in a small tank, while others will need a much larger tank. It is important to research the specific needs of the fish being bred before deciding on the size of the tank.
To start selling fish, you will need to set up a system for acquiring fish, storing fish, and then selling fish. You will also need to obtain a license to sell fish, if required in your area. Once you have all of the necessary supplies and permissions, you can start acquiring fish from suppliers and selling them to customers. To ensure success, be sure to research the best methods for caring for and selling fish.
4.4/5
0.5 gallons
Space saving design
Multi-purpose use
Safe & secure tank for breeding, isolating or acclimating fish
Hangs on the outside of the aquarium
$234
Are you like me and find that while water bubbles don't annoy you, water that sputters and splashes does?This breeding box's directions call for noisy, intrusive sputtering, so I ask because of that. It sputters in an odd way for reasons I don't fully understand, but it was driving me mad. I therefore did as I said.You'll see two components, Intake Tube (9) and Discharge Cap, in the instructions (8). If the sputtering noise bothers you as much as it did me, perform the following after assembling the breeding box according to the instructions. Discard the discharge cap. Insert a length of airline tubing about three inches long into the top of the intake tube, close to where the discharge cap would typically be attached. Just give it enough to keep it safe. Put the breeding box's water to the airline tubing's opposite end. Instead of sputtering, you'll experience bubbling, which is much more pleasant in my opinion.This little box is nice aside from that. I use it as a semi-filter that is also used to store shrimp and moss.By the way, when you perform the aforementioned patch, watch out for using airline tubing that is too lengthy. If the water is forced to climb the U-turn of the intake tube for too long, it will only function as an airpump and not draw water from the main tank in. If this occurs and you are unaware of it, it could be quite detrimental. For instance, if your house is chilly and your tank is warm, the temperature will drop significantly since the pump won't transfer the warm water from the main tank into the breeding box. Not good. Additionally, dealing with just the water volume of the box as opposed to the water volume of the entire tank is undesirable. Therefore, if you install this breeder box on a 10 or 20 gallon tank wrong and it simply brings air in, you will only get the box's tiny water quality. Therefore, ensure that water enters the box and that water also flows out of the box through the overflow (it should at least drip constantly).
4.4/5
Safe & secure tank for breeding, isolating or acclimating fish
Multi-purpose use
0.3 gallons
Hangs on the outside of the aquarium
Space saving design
$234
Are you like me and find that while water bubbles don't annoy you, water that sputters and splashes does?This breeding box's directions call for noisy, intrusive sputtering, so I ask because of that. It sputters in an odd way for reasons I don't fully understand, but it was driving me mad. I therefore did as I said.You'll see two components, Intake Tube (9) and Discharge Cap, in the instructions (8). If the sputtering noise bothers you as much as it did me, perform the following after assembling the breeding box according to the instructions. Discard the discharge cap. Insert a length of airline tubing about three inches long into the top of the intake tube, close to where the discharge cap would typically be attached. Just give it enough to keep it safe. Put the breeding box's water to the airline tubing's opposite end. Instead of sputtering, you'll experience bubbling, which is much more pleasant in my opinion.This little box is nice aside from that. I use it as a semi-filter that is also used to store shrimp and moss.By the way, when you perform the aforementioned patch, watch out for using airline tubing that is too lengthy. If the water is forced to climb the U-turn of the intake tube for too long, it will only function as an airpump and not draw water from the main tank in. If this occurs and you are unaware of it, it could be quite detrimental. For instance, if your house is chilly and your tank is warm, the temperature will drop significantly since the pump won't transfer the warm water from the main tank into the breeding box. Not good. Additionally, dealing with just the water volume of the box as opposed to the water volume of the entire tank is undesirable. Therefore, if you install this breeder box on a 10 or 20 gallon tank wrong and it simply brings air in, you will only get the box's tiny water quality. Therefore, ensure that water enters the box and that water also flows out of the box through the overflow (it should at least drip constantly).
4.2/5
Made of non-toxic plastic material, hatching for raising fish eggs
Mesh uniform and dense to ensure smooth flow of water and improve hatchability
Suction tube clamp soft, easy to install, not easy to scratch the incubator director
Biochemical cotton can avoid the impurities in the fish tank into the incubation chamber
Hatching fish eggs, you need to use the same fish tank water, so that fish eggs adapt to the environment
$234
Outstanding building with excellent materials. This product has gone through two batches. Because I didn't sure how much flow to use on the first one, I lost every single egg. It would have been beneficial to have instructions. The flow rate was accurate for the second batch.
4.1/5
ðŸ¡ðŸ¡ðŸ¡ Easy Operation: 3 mins assembly / disassemble for cleaning. (First time may take about 10 mins to remove protection layers from acrylic). Removable divider customize size and number of chambers for different needs
ðŸ¡ðŸ¡ðŸ¡ Multi-functional: This breeder box for fish tank comes with self-contained isolation plate, can reduce danger from aggressive fishes, protect injured fish, small fish, shrimp, and other sea clownfish
ðŸ¡ðŸ¡ðŸ¡ Must-have for pregnant fishes: This fish breeder is a Hatchery for viviparous fish, such as bettas, guppies, medaka, ect, can protect new born fry from being eaten, improve the survival rate of juvenile fish.
ðŸ¡ðŸ¡ðŸ¡ Space-saving & Self-floating: This fish isolation box can be secured to the aquarium wall with the suction cups. 2-layer combination does not occupy space.the grating in the bottom prevents soiling of the box by food residues and excrement.
ðŸ¡ðŸ¡ðŸ¡ Safe and Upgraded Design: Made of High quality cell cast crystal acrylic, Exquisite workmanship, Inner Size for fish to swim : 9.0" x 4.7" x 5.1" ( L x W x H ),Safe and secure for breeding, isolating or acclimating fish, favorable vents allow optimum water flow and easy to observe your baby fish.
$234
This breeder box's design is highly appealing to me. In anticipation of my platys giving birth, I purchased this box, and today I discovered the first fry. I was able to transfer the young fry into the breeder box safely because the box was quite simple to put together.The fry was swimming around the box slowly for about an hour when it suddenly slipped between the slits! The unfortunate fry was stranded outside and in full view of the other platys at first, so I initially believed I was seeing things. I was able to scoop the fry into a cup and put it back into the box after some quick scrambling, but it must have remembered how to escape since it slipped out again. Therefore, very little fry CAN squeeze through the slits.In the end, I was able to seal the fry inside the box while still allowing water to easily flow into it by using some old pantyhose that I had discovered and ripped up.The short version is that extremely small fry CAN and WILL slip through the slits, so you should think about covering the box with a thin mesh material to prevent this from happening. In any case, the style is fantastic!
4/5
ðŸ¡ðŸ¡ðŸ¡ Space-saving & Self-floating: This fish isolation box can be secured to the aquarium wall with the suction cups. 2-layer combination does not occupy space.the grating in the bottom prevents soiling of the box by food residues and excrement.
ðŸ¡ðŸ¡ðŸ¡ Must-have for pregnant fishes: This fish breeder is a Hatchery for viviparous fish, such as bettas, guppies, medaka, ect, can protect new born fry from being eaten, improve the survival rate of juvenile fish.
ðŸ¡ðŸ¡ðŸ¡ Easy Operation: 3 mins assembly / disassemble for cleaning. (First time may take about 10 mins to remove protection layers from acrylic). Removable divider customize size and number of chambers for different needs
ðŸ¡ðŸ¡ðŸ¡ Multi-functional: This breeder box for fish tank comes with self-contained isolation plate, can reduce danger from aggressive fishes, protect injured fish, small fish, shrimp, and other sea clownfish
ðŸ¡ðŸ¡ðŸ¡ Safe and Upgraded Design: Made of High quality cell cast crystal acrylic with inner size of 3.9" x 2.7" x 2.3", Exquisite workmanship, Safe and secure for breeding, isolating or acclimating fish, favorable vents allow optimum water flow and easy to observe your baby fish.
$234
I've got another safe little fry on the way! I like how strong it is on the window and how it has suction cups. Though it wasn't the original idea, it came in wonderful shape and just in time for my platy to give birth. The platie had been attacked by another fish, so I had originally placed her there to give her fins some time to heal. However, the next day, she gave birth.For my 40 gallon tank, I purchased a medium breeder box, and it works nicely for two little fish. I recently purchased the large because I have several pregnant fish and it was a great success. It's amazing to watch the small fry safe and sound from all the big terrible villains in my tank as I've never had a breader box before.The box's cover should have been more firmly and better positioned on the box, in my opinion.I've also read that cleaning the box of waste and uneaten food using a turkey baster is an excellent idea. Mines have arrived, which is wonderful, though I fear platies are about to overrun my tank.
4/5
ðŸ ðŸ ðŸ Safe and Upgraded Design: Made of High quality cell cast crystal acrylic, Exquisite workmanship, Inner Size for fish to swim : 6.1" x 3.5" x 3.7" ( L x W x H ), Safe and secure for breeding, isolating or acclimating fish, favorable vents allow optimum water flow and easy to observe your baby fish.
ðŸ ðŸ ðŸ Easy Operation: 3 mins assembly / disassemble for cleaning. (First time may take about 10 mins to remove protection layers from acrylic). Removable divider customize size and number of chambers for different needs
ðŸ ðŸ ðŸ Space-saving & Self-floating: This fish isolation box can be secured to the aquarium wall with the suction cups. 2-layer combination does not occupy space.the grating in the bottom prevents soiling of the box by food residues and excrement.
ðŸ ðŸ ðŸ Must-have for pregnant fishes: This fish breeder is a Hatchery for viviparous fish, such as bettas, guppies, medaka, ect, can protect new born fry from being eaten, improve the survival rate of juvenile fish.
ðŸ ðŸ ðŸ Multi-functional: This breeder box for fish tank comes with self-contained isolation plate, can reduce danger from aggressive fishes, protect injured fish, small fish, shrimp, and other sea clownfish
$234
I've got another safe little fry on the way! I like how strong it is on the window and how it has suction cups. Though it wasn't the original idea, it came in wonderful shape and just in time for my platy to give birth. The platie had been attacked by another fish, so I had originally placed her there to give her fins some time to heal. However, the next day, she gave birth.For my 40 gallon tank, I purchased a medium breeder box, and it works nicely for two little fish. I recently purchased the large because I have several pregnant fish and it was a great success. It's amazing to watch the small fry safe and sound from all the big terrible villains in my tank as I've never had a breader box before.The box's cover should have been more firmly and better positioned on the box, in my opinion.I've also read that cleaning the box of waste and uneaten food using a turkey baster is an excellent idea. Mines have arrived, which is wonderful, though I fear platies are about to overrun my tank.
3.8/5
Make sure you put all the pregnant fishes into the incubator! Many people are easy miss some pregnant fishes. In fact, the ventilating hole of the incubator is not visible by the naked eye, and the small fish cannot run out.
It can Separate aggressive fish, injured fish, small fish, shrimp, and other sea clownfish
Self-floating design with suction cup, 2-layer combination does not occupy space
It is a Hatchery for viviparous fish, such as bettas, guppies, medaka, ect. It can Prevent attack from adult fish, improve the survival rate of juvenile fish
Unique floating and transparent plastic cover designed to prevent the fish out of the isolation room to protect the newborn fish. It is ideal to be sick fish in fish and isolation space With sucker, anywhere convenient fixed in the tank
$234
It is effective. It hangs securely against the wall without tumbling. In my opinion, it's a little too close to the tank, smaller fish like to attempt to get caught in it, and I can't seem to prevent air from entering under the handles and forming pockets while submerged.The plastic is thin, easily breaks by accident, and is useless for cherry shrimp (which was why I bought it). It would likely function much better if used as a temporary box for mollies, guppies, or platies or as an isolation box, though.
3.7/5
ðŸŸMulti-purpose use:Bottom compartment protects new born fry,it not also can protect the newborn fish,It is also ideal to be sick fish and isolation chamber for pregnant fish.
ðŸŸHatchery breeding for baby:breeding for small baby fish,such as bettas.
ðŸŸSpace saving Self-floating design:with suction cup hangs on the aquarium,2-layer combination does not occupy space.The breeding box can be secured to the aquarium wall with the suction cups.the grating in the bottom prevents soiling of the box by food residues and excrement.
ðŸŸSafe materail:Made of safe crystal transparent plastic material,Safe and secure tank for breeding, isolating or acclimating fish,also it is easy to see your baby fish.
ðŸŸSelf-contained isolation plate:can reduce danger,suitable for isolating diseased,weakened,also can Separate aggressive fish, injured fish, small fish, shrimp, and other sea clownfish.
$234
Applied this to help the fry I saved from my main tank after one of my platies gave birth to grow larger. I didn't get to utilize the internal divider tray because I didn't realize it until after the event, but I checked, and it fit just well.The smaller size suited perfectly while still providing enough room around the sides and back to feed the adults and get into the tank, if necessary. I have a tall five gallon tank with about 11" across the front.After about three weeks of having 10 babies in the hatchery box, a local teacher adopted them all. I believe they could have easily continued for a few more weeks. The numerous apertures along the hatchery's edges provide for a proper interchange of water with the main tank, keeping it relatively clean.I would advise putting some hornwort or another fluffy plant in the transparent box for the fry to hide in so they won't feel so anxious.
3.7/5
ðŸŸSelf-contained isolation plate:can reduce danger,suitable for isolating diseased,weakened,also can Separate aggressive fish, injured fish, small fish, shrimp, and other sea clownfish.
ðŸŸSafe materail:Made of safe crystal transparent plastic material,Safe and secure tank for breeding, isolating or acclimating fish,also it is easy to see your baby fish.The size it is 5.2x2.7x2.9 inch,just for small fish.
ðŸŸMulti-purpose use:Bottom compartment protects new born fry,it not also can protect the newborn fish,It is also ideal to be sick fish and isolation chamber for pregnant fish.
ðŸŸSpace saving Self-floating design:with suction cup hangs on the aquarium,2-layer combination does not occupy space.The breeding box can be secured to the aquarium wall with the suction cups.the grating in the bottom prevents soiling of the box by food residues and excrement.
ðŸŸHatchery breeding for baby:breeding for small baby fish,such as bettas.
$234
Applied this to help the fry I saved from my main tank after one of my platies gave birth to grow larger. I didn't get to utilize the internal divider tray because I didn't realize it until after the event, but I checked, and it fit just well.The smaller size suited perfectly while still providing enough room around the sides and back to feed the adults and get into the tank, if necessary. I have a tall five gallon tank with about 11" across the front.After about three weeks of having 10 babies in the hatchery box, a local teacher adopted them all. I believe they could have easily continued for a few more weeks. The numerous apertures along the hatchery's edges provide for a proper interchange of water with the main tank, keeping it relatively clean.I would advise putting some hornwort or another fluffy plant in the transparent box for the fry to hide in so they won't feel so anxious.
Assuming you would like a general overview of how to set up a breeding tank: A breeding tank can be set up with just a few basic supplies. All you need is a tank, a filter, an air pump, and some plants. First, you'll need to choose the right size tank. It's important to have a tank that's big enough to accommodate the number of fish you want to breed. A 10-gallon tank is a good size for a small breeding operation. Next, you'll need to set up your filter and air pump
Fish are generally pregnant for a shorter period of time than mammals. The average length of time for a fish to be pregnant is around 28 days, but this can vary depending on the species of fish. Some fish species can be pregnant for as little as two weeks, while others can be pregnant for up to six months.
Fish breeders typically make between $25,000 and $50,000 a year. The exact amount depends on the type of fish being bred, the demand for that type of fish, and the breeder's level of experience.
Most fish breed once a year, typically in the spring. Some fish, like sturgeon, can live to be over 100 years old and only breed every few years.
Aquarium fish breeding can be a profitable venture, but it takes time, patience, and knowledge to be successful. There are many different ways to breed fish, and each method has its own set of challenges. The most important thing to remember is that breeding fish is not a quick or easy process. It takes dedication, hard work, and a lot of research to be successful. There are a number of factors to consider when deciding if breeding aquarium fish is right for you. First, you need to have a good understanding of the fish you want to breed. This includes their habitat,
COPYRIGHT © 2019